We have moved at community.getvera.com

Author Topic: Wiring Z-wave devices (Auxiliary Switch)  (Read 3637 times)

Offline jengelsm

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Wiring Z-wave devices (Auxiliary Switch)
« on: December 29, 2010, 05:32:47 pm »
Where can I find information on the internet how to do the wiring of my Home-Pro devices (how to wire up the Auxiliary Switch connetion(s) om devices? Do we need to use them? and if, when and how?


Offline kaldoon

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +0/-0
Re: Wiring Z-wave devices (Auxiliary Switch)
« Reply #1 on: December 30, 2010, 07:00:28 pm »
Auxiliary Switches for the Home-Pro devices are used in 3-way or 4-way set-up.

Single:  ZDW103 (or ZRF113, ZRW103, ZRW113)

3-Way:  ZDW103 (or ZRF113, ZRW103, ZRW113) + AS101

4-Way:  ZDW103 (or ZRF113, ZRW103, ZRW113) + AS101 + AS101

5-Way:  ZDW103 (or ZRF113, ZRW103, ZRW113) + AS101 + AS101 + ZTW103

6-Way:  ZDW103 (or ZRF113, ZRW103, ZRW113) + AS101 + AS101 + ZTW103 + ZTW103

Hope that helps - Happy New Year's  8)

Offline MNB

  • Hero Member
  • *****
  • Posts: 689
  • Karma: +4/-9
Re: Wiring Z-wave devices (Auxiliary Switch)
« Reply #2 on: January 01, 2011, 12:07:08 pm »
Any wiring diagrams with 4-ways... for older homes?
Edge-1.7.2607, VRI06-1LX Dimr (6), VS05-1LX Sw (4), GE ZW3002 Dimr (1), HA01C Outlet (12), HA02C Sw (6), HA04C Sw (4), GE Sw (2), HA05 Sw (3), MiniMote Contr (5), HSM200/100 Sensor (2), ZW100A Sensor (8), Nest thermostat (1) & Protect Fire/CO (6) Kwikset Locks (3), F18918W (1) & IP3M-9 (6) Cam's

Offline kaldoon

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +0/-0
Re: Wiring Z-wave devices (Auxiliary Switch)
« Reply #3 on: January 02, 2011, 09:04:49 am »
Whose devices are you planning on using? The setup for ACT/Homepro and GE/Jasco is different then  the setup for Leviton Vizia RF + or  Intermatic Intouch or HomeSettings  devices.  8)

Offline MNB

  • Hero Member
  • *****
  • Posts: 689
  • Karma: +4/-9
Re: Wiring Z-wave devices (Auxiliary Switch)
« Reply #4 on: January 03, 2011, 09:59:26 pm »
Leviton Vizia RF+, I've notice depending on what type of wiring e.g not having a neutral wire you need a different slave module is this true?
Edge-1.7.2607, VRI06-1LX Dimr (6), VS05-1LX Sw (4), GE ZW3002 Dimr (1), HA01C Outlet (12), HA02C Sw (6), HA04C Sw (4), GE Sw (2), HA05 Sw (3), MiniMote Contr (5), HSM200/100 Sensor (2), ZW100A Sensor (8), Nest thermostat (1) & Protect Fire/CO (6) Kwikset Locks (3), F18918W (1) & IP3M-9 (6) Cam's