Author Topic: PLUGIN: Broadlink RM Interface  (Read 1828 times)

Offline s83569

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #30 on: November 08, 2017, 06:38:43 pm »
Hi all, I have installed Broadlink Plugin, but:
1)  In Devices  there is nothing Broadlink related appeared.
2) In app list to install for Broadlink there is still not checkbox, that I have installed it, but when I am trying to install it again, then I see a popup - application is installed.... I am confused and finally this app is not visible in my apps....
 
I am running the latest version 1.7.3231....

What to do?

Offline TMC

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #31 on: November 09, 2017, 09:06:36 am »
Auto-discovery does not work. I have Vera Edge and Broadlink with the latest updates. For Broadlink plugin I tried the versions: 1.4, 1.8 and 1.10. If I force my Vera to update to a specific release the version is changed but the same effect does not work. I get the following message:

This page contains the following errors:
error on line 2 at column 50: xmlns:u: 'Unknown Service' is not a valid URI
Below is a rendering of the page up to the first error.


OK

If I press DEBUG button I get the following message:
ERROR: Device not ready
« Last Edit: November 09, 2017, 09:16:10 am by TMC »

Offline zedrally

  • Hero Member
  • *****
  • Posts: 857
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: PLUGIN: Broadlink RM Interface
« Reply #32 on: November 12, 2017, 01:57:14 am »
Has the App been released in the store?
Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline TMC

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #33 on: November 12, 2017, 04:14:31 am »
Code: [Select]
<root Using_2G="0" LoadTime="1510474247" DataVersion="474248555" UserData_DataVersion="474247075" TimeStamp="1510477639" lights_on="1" lights_off="7" doors_locked="0" doors_unlocked="0" sensors_tripped="0" sensors_not_tripped="8" failed_devices="0" visible_devices="84" partitions_active="0" partitions_notactive="0" ZWaveStatus="1" Mode="1" LocalTime="2017-11-12 11:07:19 D">
<Device_Num_510 PendingJobs="0" status="-1">
<states>
<state id="95" service="urn:micasaverde-com:serviceId:Broadlink1" variable="PLUGIN_VERSION" value="v1.8"/>
<state id="96" service="urn:micasaverde-com:serviceId:Broadlink1" variable="DebugMode" value="DISABLED"/>
<state id="97" service="urn:micasaverde-com:serviceId:Broadlink1" variable="SelectedDevice" value=""/>
<state id="98" service="urn:micasaverde-com:serviceId:Broadlink1" variable="DISCOVERED_DEVICES" value=""/>
<state id="99" service="urn:micasaverde-com:serviceId:Broadlink1" variable="CommandCodes" value=""/>
<state id="100" service="urn:micasaverde-com:serviceId:HaDevice1" variable="Configured" value="0"/>
<state id="101" service="urn:micasaverde-com:serviceId:HaDevice1" variable="CommFailure" value="0"/>
<state id="102" service="urn:micasaverde-com:serviceId:HaDevice1" variable="ID" value="Broadlink RM Interface"/>
</states>
<Jobs/>
<tooltip display="0"/>
</Device_Num_510>
<alerts>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13077094871" LocalDate="2017-11-11 23:30:11" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510435811" Code="DL_ARMEDTRIPPED" NewValue="1" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13077127311" LocalDate="2017-11-11 23:32:31" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510435951" Code="DL_ARMEDTRIPPED" NewValue="0" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13078813501" LocalDate="2017-11-12 01:29:11" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510442951" Code="DL_ARMEDTRIPPED" NewValue="1" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13078886351" LocalDate="2017-11-12 01:34:31" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510443271" Code="DL_ARMEDTRIPPED" NewValue="0" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13081939021" LocalDate="2017-11-12 05:38:41" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510457921" Code="DL_ARMEDTRIPPED" NewValue="1" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13081963841" LocalDate="2017-11-12 05:41:01" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510458061" Code="DL_ARMEDTRIPPED" NewValue="0" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13082594141" LocalDate="2017-11-12 06:42:11" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510461731" Code="DL_ARMEDTRIPPED" NewValue="1" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13082615981" LocalDate="2017-11-12 06:44:31" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510461871" Code="DL_ARMEDTRIPPED" NewValue="0" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13083217801" LocalDate="2017-11-12 07:45:11" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510465511" Code="DL_ARMEDTRIPPED" NewValue="1" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
<alert PK_Device="495" Room="12" DeviceName="Ping Sensor" DeviceType="urn:schemas-demo-ted-striker:device:PingSensor:1" PK_Alert="13083246701" LocalDate="2017-11-12 07:47:31" EventType="4" SourceType="4" Argument="0" Filesize="0" Severity="1" LocalTimestamp="1510465651" Code="DL_ARMEDTRIPPED" NewValue="0" Description="Ping Sensor" Users="" Server_Storage="" Key="" Icon="" PK_Store="0"/>
</alerts>
</root>

Offline zedrally

  • Hero Member
  • *****
  • Posts: 857
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: PLUGIN: Broadlink RM Interface
« Reply #34 on: November 12, 2017, 08:35:11 pm »
I'm stuck.


V1.8
error message: Broadlink RM Interface[474] : Running Lua Startup


Does not initalise.


Unable to enable DEBUG with a error message Device not ready (not surprised by that).
Have deleted and re-installed with the same results.
Logging not possible so I don't know where to go from here.
Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline cybrmage

  • Hero Member
  • *****
  • Posts: 1052
  • Karma: +105/-5
Re: PLUGIN: Broadlink RM Interface
« Reply #35 on: November 13, 2017, 12:41:21 am »
Logging not possible so I don't know where to go from here.

you MUST post LuaUPnP logs
EVL3Vista - Wink Connect - Caseta Connect - Venstar Colortouch - WiFi UDP Switch Controller - Broadlink RM - MyQGateway

Offline zedrally

  • Hero Member
  • *****
  • Posts: 857
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: PLUGIN: Broadlink RM Interface
« Reply #36 on: November 13, 2017, 01:35:40 am »
The log exceeds the permitted length, I'm really not familiar with providing these, but read up on in it in wiki and used the following which probably hasn't got the right filter?


http://192.168.0.21/cgi-bin/cmh/log.sh?Device=LuaUPnP




Attached a pdf of it.
Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline zedrally

  • Hero Member
  • *****
  • Posts: 857
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: PLUGIN: Broadlink RM Interface
« Reply #37 on: November 13, 2017, 01:38:06 am »
and for good measure.



Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline Bananfluen

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #38 on: November 13, 2017, 03:14:48 am »
Auto-discovery does not work. I have Vera Edge and Broadlink with the latest updates. For Broadlink plugin I tried the versions: 1.4, 1.8 and 1.10. If I force my Vera to update to a specific release the version is changed but the same effect does not work. I get the following message:

This page contains the following errors:
error on line 2 at column 50: xmlns:u: 'Unknown Service' is not a valid URI
Below is a rendering of the page up to the first error.


OK

If I press DEBUG button I get the following message:
ERROR: Device not ready

First of all, thanks for your effort making a plugin! I also get the exact same error as this. Would love to have this plugin working.

Offline RichardTSchaefer

  • Master Member
  • *******
  • Posts: 9729
  • Karma: +737/-136
    • RTS Services Plugins
Re: PLUGIN: Broadlink RM Interface
« Reply #39 on: November 13, 2017, 05:52:08 am »
Did any of you try to see if the "Local Concierge Server" sees your RM devices ?

Offline Guimaraes

  • Sr. Newbie
  • *
  • Posts: 34
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #40 on: November 13, 2017, 11:25:21 am »
Mine looks this way, but I can not write the codes ...

Offline nirgal

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #41 on: November 13, 2017, 01:01:31 pm »
Hello,

Does the plugin can also be used with Broadlink SP (SmartPlug) devices - IP based plugs ?
I don't have any central Broadlink device beside the e-control app.

Thanks,
Nir

Offline cybrmage

  • Hero Member
  • *****
  • Posts: 1052
  • Karma: +105/-5
Re: PLUGIN: Broadlink RM Interface
« Reply #42 on: November 13, 2017, 02:44:38 pm »
Attached a pdf of it.

which is quite useless... It shows 4 seconds of the Vera Z-Wave initialization, and not anything else...



Mine looks this way, but I can not write the codes ...

Which shows that you have some devices, and have selected a device... You don't show the "Codes" tab, which is where the codes are managed and manually sent... So far, I don't see a problem... If you can't send codes, show a screenshot of the codes page and the LuaUPnP log showing a send attempt....


Does the plugin can also be used with Broadlink SP (SmartPlug) devices - IP based plugs ?

No. This plugin is exclusively for the Broadlink RM (remote control) devices.
EVL3Vista - Wink Connect - Caseta Connect - Venstar Colortouch - WiFi UDP Switch Controller - Broadlink RM - MyQGateway

Offline TMC

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #43 on: November 13, 2017, 03:24:59 pm »
Hi cybrmage.
How can I post LuaUPnP logs showing the operation of the plugin?

Offline TMC

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
Re: PLUGIN: Broadlink RM Interface
« Reply #44 on: November 13, 2017, 03:27:34 pm »
Auto-discovery does not work. I have Vera Edge and Broadlink with the latest updates. For Broadlink plugin I tried the versions: 1.4, 1.8 and 1.10. If I force my Vera to update to a specific release the version is changed but the same effect does not work. I get the following message:

This page contains the following errors:
error on line 2 at column 50: xmlns:u: 'Unknown Service' is not a valid URI
Below is a rendering of the page up to the first error.


OK

If I press DEBUG button I get the following message:
ERROR: Device not ready

First of all, thanks for your effort making a plugin! I also get the exact same error as this. Would love to have this plugin working.

I'm not the person who developed the plugin.