Author Topic: Zen22 intermittent connection  (Read 152 times)

Offline digitalmedic

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Zen22 intermittent connection
« on: November 25, 2017, 10:56:55 am »
I have three Zooz Zen22 dimmers in the kitchen.  Two of them keep going offline, especially the farthest one from the hub.  Here is a crude diagram of what I have.  Kitchen to Deck 1 is about 20 feet, and Kitchen to Deck 2 is about 13 feet or so.  I just installed all of these this weekend.  Most of the time, Deck 1 has been showing "not detected unless I bring the hub down into the kitchen and put it within 10 feet of the switch.  Two nights ago, I finally got everything detected and when I woke up yesterday, Deck 1 and Deck 2 were not detected.  Last night before I went to bed, all switches were being detected.  When I woke up this morning, Kitchen and Deck 1 were no longer being detected. Is Zwave Plus mesh networking really this fragile?  It is definitely frustrating.

                     Deck 1
--------------------X-----------------------
|                                                          |
|                                                          |
|                                                          X  Deck 2
|                                                          |
|                                                          |
|                                                          |
|                                                          |
|                                                          |
----------X--                                   ------
        Kitchen


I have two other switches out in the living room that seems to always work, but they are directly under the hub and about 20ish feet from the kitchen Zen22.  Does anyone have any thoughts?

Rick