Author Topic: Load type on Leviton Dimmer DZ1KD-1BZ/DZ6HD-1BZ  (Read 803 times)

Offline Sulsa

  • Newbie
  • *
  • Posts: 12
  • Karma: +0/-0
Load type on Leviton Dimmer DZ1KD-1BZ/DZ6HD-1BZ
« on: November 29, 2017, 07:37:17 pm »
Per the manual there is supposed to be a parameter to change the load type
0= Incandescent
1= LED
2= CFL

However I am not able to find "Load Type"" in the parameters/variables.  Has anyone gotten this working?

http://www.leviton.com/en/docs/DI-000-DZ6HD-02A-W.pdf

Thanks!

Offline Bhummel99

  • Sr. Newbie
  • *
  • Posts: 46
  • Karma: +0/-3
Re: Load type on Leviton Dimmer DZ1KD-1BZ/DZ6HD-1BZ
« Reply #1 on: October 25, 2018, 12:50:09 am »
Did you ever get an answer to your question?

I just installed this dimmer into my Z-Wave network using a VeraPlus.    The dimmer works fine except the dimming rate is not smooth like other dimmers that I have.   The switch just seems to hop to the next dimming level.  It's not very aesthetically pleasing.

If I use the switch itself to dim the lights, then it is very smooth.  When Vera issues a dim level command, the switch just "hops" to the final level.

I am sure there is a ramp speed or some setting that can be adjusted.  I just have not found it.

Offline Cristina

  • Support
  • Sr. Newbie
  • *****
  • Posts: 37
  • Karma: +6/-0
Re: Load type on Leviton Dimmer DZ1KD-1BZ/DZ6HD-1BZ
« Reply #2 on: October 25, 2018, 01:41:36 pm »
Hello Bhummel99,

Please note that we created a trouble ticket for you. As soon as you have the time please reply.

Thank you and Have a nice day,

Offline Bhummel99

  • Sr. Newbie
  • *
  • Posts: 46
  • Karma: +0/-3
Re: Load type on Leviton Dimmer DZ1KD-1BZ/DZ6HD-1BZ
« Reply #3 on: October 25, 2018, 11:43:10 pm »
Per the manual there is supposed to be a parameter to change the load type
0= Incandescent
1= LED
2= CFL

However I am not able to find "Load Type"" in the parameters/variables.  Has anyone gotten this working?

http://www.leviton.com/en/docs/DI-000-DZ6HD-02A-W.pdf

Thanks!

Its under DEVICE OPTIONS for your Leviton wall dimmer.    Item #8.    I don't think that it makes any difference how you set it though.

8-Load Type (0=Incandescent or 1=LED or 2=CFL or 3=Mark 10)