Author Topic: New Beta 7.0.25b available  (Read 3098 times)

Offline svaleb

  • Sr. Member
  • ****
  • Posts: 461
  • Karma: +7/-7
« Last Edit: January 03, 2018, 10:02:55 am by Sorin M. »

Offline Wekurtz74

  • Full Member
  • ***
  • Posts: 236
  • Karma: +3/-0
Re: New Beta 7.0.25b availabele
« Reply #1 on: December 29, 2017, 10:20:23 am »
Isn't there one with the UI 8 preview? Is this it?

Sent from my Pixel 2 XL using Tapatalk


Offline rafale77

  • Hero Member
  • *****
  • Posts: 1407
  • Karma: +71/-24
Re: New Beta 7.0.25b availabele
« Reply #2 on: December 29, 2017, 11:48:28 am »
7.0.24 release had some issues the 7.0.24b did not have that's why it was pulled.

this is the link to the 7.0.24b:
https://dl.mios.com/rl/BETA/724/mt7621_Luup_ui7-1.7.3423-en-mios.squashfs
openLuup (97 devices, 134 scenes, 20 apps) controlling HomeAss + VeraPlus (138 zwave nodes, 8 Zigbee nodes, 205 devices, 20 scenes , 2 app) Bridged to Homekit and Alexa. VeraPlus ExtRooted!

Offline hellovn

  • Sr. Member
  • ****
  • Posts: 273
  • Karma: +19/-46
Re: New Beta 7.0.25b availabele
« Reply #3 on: December 29, 2017, 02:20:55 pm »
Can anyone control the z-wave device through the web browser (chrome & firefox)? It seems the new beta firmware breaks everything.

Offline hellovn

  • Sr. Member
  • ****
  • Posts: 273
  • Karma: +19/-46
Re: New Beta 7.0.25b availabele
« Reply #4 on: December 29, 2017, 02:24:55 pm »
Vera ios app does not work for me too. Does anyone have a link to firmware v23?

Offline rafale77

  • Hero Member
  • *****
  • Posts: 1407
  • Karma: +71/-24
Re: New Beta 7.0.25b availabele
« Reply #5 on: December 29, 2017, 03:53:58 pm »
I don't have 7.0.23 as it was catastrophic for my zigbee network. Sorry.
I am not seeing any issues so for on 7.0.25b. Only noticed that the UI control is very sluggish right after the upgrade but it has gotten better now.
openLuup (97 devices, 134 scenes, 20 apps) controlling HomeAss + VeraPlus (138 zwave nodes, 8 Zigbee nodes, 205 devices, 20 scenes , 2 app) Bridged to Homekit and Alexa. VeraPlus ExtRooted!

Offline ranneman

  • Full Member
  • ***
  • Posts: 142
  • Karma: +7/-0
Re: New Beta 7.0.25b availabele
« Reply #6 on: January 02, 2018, 01:52:10 am »
Vera lite UI7 Europe, Vera Plus, Zwave.me switches/dimmers, Zwave.me plus multi switch, Fibaro switches and multi sensors, Everspring sensors motion, temp., humidity. Honeywell Evohome, Greenwave, Sonos, Brel shades, RFXCOM, MiLights, Alexa.

Offline hellovn

  • Sr. Member
  • ****
  • Posts: 273
  • Karma: +19/-46
Re: New Beta 7.0.25b availabele
« Reply #7 on: January 02, 2018, 09:14:07 am »
I called tech support and it seems my rashberry pi (google home, openhab2, and home kit) is flooding my z-wave network with the http request. Restarting my rashberry pi fixed the problem. Thanks away.

Offline ranneman

  • Full Member
  • ***
  • Posts: 142
  • Karma: +7/-0
Re: New Beta 7.0.25b availabele
« Reply #8 on: January 03, 2018, 02:07:16 am »
Have been searching for the UI8 sneak preview. I have found two changes so far,
1: Android Vera mobile app (doesn't work for me)
2: Top Right corner showing a drop down to switch between Vera Systems. Was this there before or is this new? Never really noticed it.

anything else?
« Last Edit: January 03, 2018, 05:37:06 am by ranneman »
Vera lite UI7 Europe, Vera Plus, Zwave.me switches/dimmers, Zwave.me plus multi switch, Fibaro switches and multi sensors, Everspring sensors motion, temp., humidity. Honeywell Evohome, Greenwave, Sonos, Brel shades, RFXCOM, MiLights, Alexa.

Offline rafale77

  • Hero Member
  • *****
  • Posts: 1407
  • Karma: +71/-24
Re: New Beta 7.0.25b available
« Reply #9 on: January 03, 2018, 02:53:50 pm »
This build has been the most stable firmware for me fixing both my Zigbee network death issue and a lot of Luup reload issues. I am now at 60hrs without a Luup reload which is no small feat for the Vera.
openLuup (97 devices, 134 scenes, 20 apps) controlling HomeAss + VeraPlus (138 zwave nodes, 8 Zigbee nodes, 205 devices, 20 scenes , 2 app) Bridged to Homekit and Alexa. VeraPlus ExtRooted!

Offline Sender

  • Hero Member
  • *****
  • Posts: 912
  • Karma: +545/-453
  • Sr. manager of my Vera
Re: New Beta 7.0.25b available
« Reply #10 on: January 04, 2018, 02:47:23 am »
Pity that there again not many (none) new zwave devices supported. Is this a dead end?
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1036
  • Karma: +83/-10
Re: New Beta 7.0.25b available
« Reply #11 on: January 04, 2018, 04:32:17 am »
This release was mostly focused on stability and security and people should already see improvements.
A batch of new integrations will start pouring in with 7.26 firmware.
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline Sender

  • Hero Member
  • *****
  • Posts: 912
  • Karma: +545/-453
  • Sr. manager of my Vera
Re: New Beta 7.0.25b available
« Reply #12 on: January 04, 2018, 04:45:18 am »
Same counted for previous versions. Only a few zwave devices were added. For which this forum was mowning for years for some devices. Adding zwave device support should ne the core reasons for updating firmware in my opinion.
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline rafale77

  • Hero Member
  • *****
  • Posts: 1407
  • Karma: +71/-24
Re: New Beta 7.0.25b available
« Reply #13 on: January 04, 2018, 11:31:19 am »
Same counted for previous versions. Only a few zwave devices were added. For which this forum was mowning for years for some devices. Adding zwave device support should ne the core reasons for updating firmware in my opinion.

Sorry but I completely disagree when the firmware stability is this precarious. Adding support to new devices should not be the focus of firmware upgrades as they tend to break more things than fixing them. I have actually still yet to find a zwave device that is not supported. With very few exceptions like some specific door locks or very exotic sensors/switches, what one has to do is to manually configure them by changing device categories and device/implementation files. Out of my 100+ devices, only ~10% are on the vera official support list. The zwave standard communication stack is the big advantage of zwave implementation over other protocols and I have devices in every category listed in this forum from HVAC vents to multi sensors to multi scene controllers. Zigbee is a completely different story though, they are improving with the standard HA stack as well.
openLuup (97 devices, 134 scenes, 20 apps) controlling HomeAss + VeraPlus (138 zwave nodes, 8 Zigbee nodes, 205 devices, 20 scenes , 2 app) Bridged to Homekit and Alexa. VeraPlus ExtRooted!

Offline Sender

  • Hero Member
  • *****
  • Posts: 912
  • Karma: +545/-453
  • Sr. manager of my Vera
Re: New Beta 7.0.25b available
« Reply #14 on: January 04, 2018, 11:43:08 am »
Same counted for previous versions. Only a few zwave devices were added. For which this forum was mowning for years for some devices. Adding zwave device support should ne the core reasons for updating firmware in my opinion.

Sorry but I completely disagree when the firmware stability is this precarious. Adding support to new devices should not be the focus of firmware upgrades as they tend to break more things than fixing them. I have actually still yet to find a zwave device that is not supported. With very few exceptions like some specific door locks or very exotic sensors/switches, what one has to do is to manually configure them by changing device categories and device/implementation files. Out of my 100+ devices, only ~10% are on the vera official support list. The zwave standard communication stack is the big advantage of zwave implementation over other protocols and I have devices in every category listed in this forum from HVAC vents to multi sensors to multi scene controllers. Zigbee is a completely different story though, they are improving with the standard HA stack as well.

Free to disagree.
Good firmware is more important than good karma. (and this costed me lots of Karma)