Author Topic: Minimote Button Scene Issue  (Read 355 times)

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Minimote Button Scene Issue
« on: December 31, 2017, 01:12:03 pm »
Hello,

I have Minimote 1.19 firmware and a long time user of this device. So I'll lay out the details.

Original Setup before going to Vera Plus: Used lua code to do toggle state for all 4 buttons in Vera Lite using 4 scenes. Worked perfectly without issue.

Tests of group mode versus scene mode in Vera Plus: I was able to use group mode and finally get all 4 lights to toggle independent of the Vera however the Minmote would sometimes require 2 taps versus one to complete the action. Not sure why so I abandoned this method. I reset the Minmote, excluded, reincluded and remained in scene mode.

Initial Vera Plus Scene Creation: Using the old VL lua code wasn't working when I tested it. I found other code snippets that worked for toggleState but abandoned the idea as I realized the advanced scene editor with toggleState was a faster more simple method.

ISSUE: Tap button 2 and the correct light comes on/off but also triggers another light to toggle as well which is programmed to button 3 with a scene. Based on whatever status either of those 2 lights are, the tapping of button 2 will switch each of the 2 lights to whatever the opposite state is.

THOUGHTS: I thought I somehow created group or associations between the two lights during group mode of the Minimote. But both the devices and Minimote have been correctly excluded and re-included proving this is not the case.

VARIABLES/SETTINGS: NumButtons:
8,1-1-1=ui7_lang_tap_button 1,2-2-2=ui7_lang_hold_button 1,3-3-3=ui7_lang_tap_button 2,4-4-4=ui7_lang_hold_button 2,5-5-5=ui7_lang_tap_button 3,6-6-6=ui7_lang_hold_button 3,7-7-7=ui7_lang_tap_button 4,8-8-8=ui7_lang_hold_button 4

SceneShortcuts:
1=20-0,2=0-0,3=24-0,4=0-0,5=25-0,6=0-0,7=23-0,8=0-0

LOGS (I tapped Button 2 two times allowing time for the actions to complete):
Code: [Select]
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: sl_SceneActivated was: 1 now: 3 #hooks: 8 upnp: 0 skip: 0 v:0xe110b8/NONE duplicate:0 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 5  scene 1 PL OnOff is false repeat 0/1 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 6  scene 4 PL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 7  scene 2 RL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 8  scene 3 KL OnOff is true users: allow:1 <0x76866520>
8 12/31/17 1:07:07 PM Scene::RunScene running 25 3 KL OnOff <0x76866520>
8 12/31/17 1:07:07 PM JobHandler_LuaUPnP::HandleActionRequest device: 128 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelTarget was: 0 now: 100 #hooks: 0 upnp: 0 skip: 0 v:0xfb2db0/NONE duplicate:0 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 9 AUTO_GENERATED scene 1 PL OnOff is false repeat 0/-1 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 10 AUTO_GENERATED scene 2 RL OnOff is true users: allow:1 <0x76866520>
8 12/31/17 1:07:07 PM Scene::RunScene running 24 2 RL OnOff <0x76866520>
8 12/31/17 1:07:07 PM JobHandler_LuaUPnP::HandleActionRequest device: 127 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Target was: 0 now: 1 #hooks: 0 upnp: 0 skip: 0 v:0xfa5e18/NONE duplicate:0 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 11 AUTO_GENERATED scene 3 KL OnOff is false repeat 0/-1 <0x76866520>
7 12/31/17 1:07:07 PM Event::Evaluate 12 AUTO_GENERATED scene 4 PL OnOff is false repeat 0/-1 <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneID was: 1 now: 3 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneTime was: 1514721259 now: 1514743626 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelStatus was: 0 now: 100 #hooks: 1 upnp: 0 skip: 0 v:0xfb2e18/NONE duplicate:0 <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 0 now: 1 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
4 12/31/17 1:07:07 PM <Job ID="297" Name="Level 99 node 32" Device="128" Created="2017-12-31 13:07:06" Started="2017-12-31 13:07:06" Completed="2017-12-31 13:07:06" Duration="0.284957000" Runtime="0.283991000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="32" NodeType="ZWaveDimmableLight" NodeDescription="Kitchen Light"/> <0x76866520>
6 12/31/17 1:07:07 PM Device_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 0 now: 1 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
4 12/31/17 1:07:07 PM <Job ID="298" Name="ON node 31" Device="127" Created="2017-12-31 13:07:06" Started="2017-12-31 13:07:06" Completed="2017-12-31 13:07:06" Duration="0.370630000" Runtime="0.287513000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="31" NodeType="ZWaveNonDimmableLight" NodeDescription="Remote Light"/> <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: sl_SceneActivated was: 3 now: 3 #hooks: 8 upnp: 0 skip: 0 v:0xe110b8/NONE duplicate:0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 5  scene 1 PL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 6  scene 4 PL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 7  scene 2 RL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 8  scene 3 KL OnOff is true users: allow:1 <0x76866520>
8 12/31/17 1:07:15 PM Scene::RunScene running 25 3 KL OnOff <0x76866520>
8 12/31/17 1:07:15 PM JobHandler_LuaUPnP::HandleActionRequest device: 128 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelTarget was: 100 now: 0 #hooks: 0 upnp: 0 skip: 0 v:0xfb2db0/NONE duplicate:0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 9 AUTO_GENERATED scene 1 PL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 10 AUTO_GENERATED scene 2 RL OnOff is true users: allow:1 <0x76866520>
8 12/31/17 1:07:15 PM Scene::RunScene running 24 2 RL OnOff <0x76866520>
8 12/31/17 1:07:15 PM JobHandler_LuaUPnP::HandleActionRequest device: 127 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Target was: 1 now: 0 #hooks: 0 upnp: 0 skip: 0 v:0xfa5e18/NONE duplicate:0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 11 AUTO_GENERATED scene 3 KL OnOff is false repeat 0/0 <0x76866520>
7 12/31/17 1:07:15 PM Event::Evaluate 12 AUTO_GENERATED scene 4 PL OnOff is false repeat 0/0 <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneID was: 3 now: 3 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:1 <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneTime was: 1514743626 now: 1514743634 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelStatus was: 100 now: 0 #hooks: 1 upnp: 0 skip: 0 v:0xfb2e18/NONE duplicate:0 <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 1 now: 0 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
4 12/31/17 1:07:15 PM <Job ID="299" Name="Level 0 node 32" Device="128" Created="2017-12-31 13:07:14" Started="2017-12-31 13:07:14" Completed="2017-12-31 13:07:15" Duration="0.302601000" Runtime="0.302159000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="32" NodeType="ZWaveDimmableLight" NodeDescription="Kitchen Light"/> <0x76866520>
6 12/31/17 1:07:15 PM Device_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 1 now: 0 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
4 12/31/17 1:07:15 PM <Job ID="300" Name="OFF node 31" Device="127" Created="2017-12-31 13:07:14" Started="2017-12-31 13:07:14" Completed="2017-12-31 13:07:15" Duration="0.397403000" Runtime="0.320653000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="31" NodeType="ZWaveNonDimmableLight" NodeDescription="Remote Light"/> <0x76866520>

Looking for help to determine why this happens. Let me know if I can provide more info.

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: Minimote Button Scene Issue
« Reply #1 on: January 04, 2018, 02:59:32 pm »
Hello,

I have Minimote 1.19 firmware and a long time user of this device. So I'll lay out the details.

Original Setup before going to Vera Plus: Used lua code to do toggle state for all 4 buttons in Vera Lite using 4 scenes. Worked perfectly without issue.

Tests of group mode versus scene mode in Vera Plus: I was able to use group mode and finally get all 4 lights to toggle independent of the Vera however the Minmote would sometimes require 2 taps versus one to complete the action. Not sure why so I abandoned this method. I reset the Minmote, excluded, reincluded and remained in scene mode.

Initial Vera Plus Scene Creation: Using the old VL lua code wasn't working when I tested it. I found other code snippets that worked for toggleState but abandoned the idea as I realized the advanced scene editor with toggleState was a faster more simple method.

ISSUE: Tap button 2 and the correct light comes on/off but also triggers another light to toggle as well which is programmed to button 3 with a scene. Based on whatever status either of those 2 lights are, the tapping of button 2 will switch each of the 2 lights to whatever the opposite state is.

THOUGHTS: I thought I somehow created group or associations between the two lights during group mode of the Minimote. But both the devices and Minimote have been correctly excluded and re-included proving this is not the case.

VARIABLES/SETTINGS: NumButtons:
8,1-1-1=ui7_lang_tap_button 1,2-2-2=ui7_lang_hold_button 1,3-3-3=ui7_lang_tap_button 2,4-4-4=ui7_lang_hold_button 2,5-5-5=ui7_lang_tap_button 3,6-6-6=ui7_lang_hold_button 3,7-7-7=ui7_lang_tap_button 4,8-8-8=ui7_lang_hold_button 4

SceneShortcuts:
1=20-0,2=0-0,3=24-0,4=0-0,5=25-0,6=0-0,7=23-0,8=0-0

LOGS (I tapped Button 2 two times allowing time for the actions to complete):
Code: [Select]
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: sl_SceneActivated was: 1 now: 3 #hooks: 8 upnp: 0 skip: 0 v:0xe110b8/NONE duplicate:0 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 5  scene 1 PL OnOff is false repeat 0/1 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 6  scene 4 PL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 7  scene 2 RL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 8  scene 3 KL OnOff is true users: allow:1 <0x76866520>
812/31/17 1:07:07 PMScene::RunScene running 25 3 KL OnOff <0x76866520>
812/31/17 1:07:07 PMJobHandler_LuaUPnP::HandleActionRequest device: 128 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelTarget was: 0 now: 100 #hooks: 0 upnp: 0 skip: 0 v:0xfb2db0/NONE duplicate:0 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 9 AUTO_GENERATED scene 1 PL OnOff is false repeat 0/-1 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 10 AUTO_GENERATED scene 2 RL OnOff is true users: allow:1 <0x76866520>
812/31/17 1:07:07 PMScene::RunScene running 24 2 RL OnOff <0x76866520>
812/31/17 1:07:07 PMJobHandler_LuaUPnP::HandleActionRequest device: 127 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Target was: 0 now: 1 #hooks: 0 upnp: 0 skip: 0 v:0xfa5e18/NONE duplicate:0 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 11 AUTO_GENERATED scene 3 KL OnOff is false repeat 0/-1 <0x76866520>
712/31/17 1:07:07 PMEvent::Evaluate 12 AUTO_GENERATED scene 4 PL OnOff is false repeat 0/-1 <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneID was: 1 now: 3 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneTime was: 1514721259 now: 1514743626 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelStatus was: 0 now: 100 #hooks: 1 upnp: 0 skip: 0 v:0xfb2e18/NONE duplicate:0 <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 0 now: 1 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
412/31/17 1:07:07 PM<Job ID="297" Name="Level 99 node 32" Device="128" Created="2017-12-31 13:07:06" Started="2017-12-31 13:07:06" Completed="2017-12-31 13:07:06" Duration="0.284957000" Runtime="0.283991000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="32" NodeType="ZWaveDimmableLight" NodeDescription="Kitchen Light"/> <0x76866520>
612/31/17 1:07:07 PMDevice_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 0 now: 1 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
412/31/17 1:07:07 PM<Job ID="298" Name="ON node 31" Device="127" Created="2017-12-31 13:07:06" Started="2017-12-31 13:07:06" Completed="2017-12-31 13:07:06" Duration="0.370630000" Runtime="0.287513000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="31" NodeType="ZWaveNonDimmableLight" NodeDescription="Remote Light"/> <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: sl_SceneActivated was: 3 now: 3 #hooks: 8 upnp: 0 skip: 0 v:0xe110b8/NONE duplicate:0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 5  scene 1 PL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 6  scene 4 PL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 7  scene 2 RL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 8  scene 3 KL OnOff is true users: allow:1 <0x76866520>
812/31/17 1:07:15 PMScene::RunScene running 25 3 KL OnOff <0x76866520>
812/31/17 1:07:15 PMJobHandler_LuaUPnP::HandleActionRequest device: 128 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelTarget was: 100 now: 0 #hooks: 0 upnp: 0 skip: 0 v:0xfb2db0/NONE duplicate:0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 9 AUTO_GENERATED scene 1 PL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 10 AUTO_GENERATED scene 2 RL OnOff is true users: allow:1 <0x76866520>
812/31/17 1:07:15 PMScene::RunScene running 24 2 RL OnOff <0x76866520>
812/31/17 1:07:15 PMJobHandler_LuaUPnP::HandleActionRequest device: 127 service: urn:micasaverde-com:serviceId:HaDevice1 action: ToggleState <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Target was: 1 now: 0 #hooks: 0 upnp: 0 skip: 0 v:0xfa5e18/NONE duplicate:0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 11 AUTO_GENERATED scene 3 KL OnOff is false repeat 0/0 <0x76866520>
712/31/17 1:07:15 PMEvent::Evaluate 12 AUTO_GENERATED scene 4 PL OnOff is false repeat 0/0 <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneID was: 3 now: 3 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:1 <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 126 service: urn:micasaverde-com:serviceId:SceneController1 variable: LastSceneTime was: 1514743626 now: 1514743634 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:Dimming1 variable: LoadLevelStatus was: 100 now: 0 #hooks: 1 upnp: 0 skip: 0 v:0xfb2e18/NONE duplicate:0 <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 128 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 1 now: 0 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
412/31/17 1:07:15 PM<Job ID="299" Name="Level 0 node 32" Device="128" Created="2017-12-31 13:07:14" Started="2017-12-31 13:07:14" Completed="2017-12-31 13:07:15" Duration="0.302601000" Runtime="0.302159000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="32" NodeType="ZWaveDimmableLight" NodeDescription="Kitchen Light"/> <0x76866520>
612/31/17 1:07:15 PMDevice_Variable::m_szValue_set device: 127 service: urn:upnp-org:serviceId:SwitchPower1 variable: Status was: 1 now: 0 #hooks: 1 upnp: 0 skip: 0 v:0xfa5e80/NONE duplicate:0 <0x76866520>
412/31/17 1:07:15 PM<Job ID="300" Name="OFF node 31" Device="127" Created="2017-12-31 13:07:14" Started="2017-12-31 13:07:14" Completed="2017-12-31 13:07:15" Duration="0.397403000" Runtime="0.320653000" Status="Successful" LastNote="SUCCESS! Transmit was OK" Node="31" NodeType="ZWaveNonDimmableLight" NodeDescription="Remote Light"/> <0x76866520>

Looking for help to determine why this happens. Let me know if I can provide more info.
Bumping once for any Minimote users out there.

Sent from my VS995 using Tapatalk


Offline shallowearth

  • Hero Member
  • *****
  • Posts: 963
  • Karma: +45/-9
Re: Minimote Button Scene Issue
« Reply #2 on: January 04, 2018, 07:30:20 pm »
To add the device I recommend using the Handheld Aeon KeyFob if you have the V1 MiniMote and the Aeon KeyFob Zwave+ if you have the V2 MiniMote
Keep the MiniMote very close to Vera when pairing, and let the timer run out to give the Vera time to configure the remote, then hit Exit.

The Button Mapping:
Note that if you don't get 8 buttons listed on the Scene's menu by default the pairing wasn't fully successful, delete and start again.

Button 1 (upper left) - 1
Button 1 Long Press -2
Button 2 (upper right) - 3
Button 2 Long Press - 4
Button 3 (lower left)- 5
Button 3 Long Press- 6
Button 4 (lower right)- 7
Button 4 Long Press- 8

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: Minimote Button Scene Issue
« Reply #3 on: January 05, 2018, 04:13:11 pm »
To add the device I recommend using the Handheld Aeon KeyFob if you have the V1 MiniMote and the Aeon KeyFob Zwave+ if you have the V2 MiniMote
Keep the MiniMote very close to Vera when pairing, and let the timer run out to give the Vera time to configure the remote, then hit Exit.

The Button Mapping:
Note that if you don't get 8 buttons listed on the Scene's menu by default the pairing wasn't fully successful, delete and start again.

Button 1 (upper left) - 1
Button 1 Long Press -2
Button 2 (upper right) - 3
Button 2 Long Press - 4
Button 3 (lower left)- 5
Button 3 Long Press- 6
Button 4 (lower right)- 7
Button 4 Long Press- 8

Thanks shallowearth. I do get the 8 buttons. My problem is button 2 controls the light correctly but also triggers scene 3's light. The OP has the logs and I just can't figure out why it does that.

Offline shallowearth

  • Hero Member
  • *****
  • Posts: 963
  • Karma: +45/-9
Re: Minimote Button Scene Issue
« Reply #4 on: January 06, 2018, 01:54:47 am »
It can do that if the include was corrupted or interrupted in some way.
Make sure to have it sitting on the vera for include, after you include you don't touch it until all the flashing is done, and it has completely resolved with the device name and button labels in the UI.  Then start programming it.  Do all programming through the Vera scene UI.  Do not use the buttons to do any programming of devices.

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: Minimote Button Scene Issue
« Reply #5 on: January 06, 2018, 11:25:07 am »
It can do that if the include was corrupted or interrupted in some way.
Make sure to have it sitting on the vera for include, after you include you don't touch it until all the flashing is done, and it has completely resolved with the device name and button labels in the UI.  Then start programming it.  Do all programming through the Vera scene UI.  Do not use the buttons to do any programming of devices.

Thanks, I'll try it again although I'm confident I did this several times. Did the logging I posted reveal anything to you?

Offline shallowearth

  • Hero Member
  • *****
  • Posts: 963
  • Karma: +45/-9
Re: Minimote Button Scene Issue
« Reply #6 on: January 06, 2018, 05:01:24 pm »
You might want to check that The miss firing scene does not have any triggers that are configured wrong.

You might also try reflashing the firmware on the minimote.