Author Topic: GE Jasco Cooper 9540  (Read 363 times)

Offline johnes

  • Hero Member
  • *****
  • Posts: 629
  • Karma: +7/-7
GE Jasco Cooper 9540
« on: January 11, 2018, 02:32:23 pm »
Some of my 9540s have a bunch of configuration options set - like in this document:

Others don't.  What should I be seeing for configuration options?

Offline sgm

  • Sr. Newbie
  • *
  • Posts: 22
  • Karma: +1/-1
Re: GE Jasco Cooper 9540
« Reply #1 on: January 14, 2018, 10:49:30 am »
What that document does NOT show is parameter #10......which can be vital.  Here are my notes to myself:

"Sync 3-ways" (this is not the real name for this parameter, but I can find no documentation on this parameter) (#10) default is 0. This parameter is vital to the proper operation of master (9540-N) and slave (9542-Z) switches in a 3-way circuit; it only applies to the master (9540-N).  If this parameter is set to 0, the switches will stay in sync (that is: both reflect the same state of on/off and dim level) when operated manually; but if Vera is involved, the switches will not update each other when there is a change of state.  If this parameter is set to 1, the 2 switches will always stay in sync whether or not the Vera is involved.
            - 0 = disable
            - 1 = enable