Author Topic: Firmware 7.25  (Read 8251 times)

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 867
  • Karma: +5/-5
Firmware 7.25
« on: January 15, 2018, 02:09:11 pm »
Who's going first?

http://support.getvera.com/customer/en/portal/articles/2912913

Sent from my SM-G930P using Tapatalk


Offline rigpapa

  • Hero Member
  • *****
  • Posts: 638
  • Karma: +94/-1
Re: Firmware 7.25
« Reply #1 on: January 15, 2018, 03:19:25 pm »
I'll watch.
Author of Reactor, DelayLight, SiteSensor, Rachio, Deus Ex Machina II, Intesis WMP Gateway, Auto Virtual Thermostat and VirtualSensor plugins. Vera Plus w/100+ Z-wave devices. Vera3 sandbox.

Offline skalleno

  • Newbie
  • *
  • Posts: 4
  • Karma: +1/-0
Re: Firmware 7.25
« Reply #2 on: January 15, 2018, 03:48:21 pm »
Updated, everything running fine   :)

Offline Inzax

  • Sr. Member
  • ****
  • Posts: 391
  • Karma: +26/-64
Re: Firmware 7.25
« Reply #3 on: January 15, 2018, 04:23:12 pm »
I thought about it....waived off.  Figured I would wait to see how many melt downs are posted.  Running the latest beta now and it is the most stable firmware for me yet.
Proud Member of the Epic Smite Thread.
VeraSecure; Concord 4 Panel; 6 IP Cameras; Imperiehome; Housemodes; system monitor; DeusexmachinaII; Vera Concierge

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 1313
  • Karma: +34/-32
Re: Firmware 7.25
« Reply #4 on: January 15, 2018, 04:39:06 pm »
Me too. Popcorn almost ready.
Vera 3, 1.7.1030, CT101, Everspring motion sensor, GE/Jasco switch, Leviton outlet, AeonLabs sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual/Multi Switch, Weatherunderground, LB60Z-1 bulb, Hue, Alexa

Offline Bill Scruggs

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +4/-0
Re: Firmware 7.25
« Reply #5 on: January 15, 2018, 05:12:51 pm »
I jumped in head first! 2 Edges, 2 Pluses, and a Secure! All good so far.....

Offline Inzax

  • Sr. Member
  • ****
  • Posts: 391
  • Karma: +26/-64
Re: Firmware 7.25
« Reply #6 on: January 15, 2018, 06:17:36 pm »
Ok...based on Bill SCruggs experience I am testing the waters with one of my Veras (VeraSecure)

Standby....

8 minutes.  Upgrade complete.  Looks good.  Weird.   
Proud Member of the Epic Smite Thread.
VeraSecure; Concord 4 Panel; 6 IP Cameras; Imperiehome; Housemodes; system monitor; DeusexmachinaII; Vera Concierge

Offline Bill Scruggs

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +4/-0
Re: Firmware 7.25
« Reply #7 on: January 15, 2018, 06:21:11 pm »
I was just reporting not suggesting! Upgrade at your own risk!

Offline Inzax

  • Sr. Member
  • ****
  • Posts: 391
  • Karma: +26/-64
Re: Firmware 7.25
« Reply #8 on: January 15, 2018, 06:23:25 pm »
@Bill Scruggs.  No worries.  I would not have blamed you if things exploded.  I just would have downgraded. 
Proud Member of the Epic Smite Thread.
VeraSecure; Concord 4 Panel; 6 IP Cameras; Imperiehome; Housemodes; system monitor; DeusexmachinaII; Vera Concierge

Offline hellovn

  • Sr. Member
  • ****
  • Posts: 268
  • Karma: +19/-46
Re: Firmware 7.25
« Reply #9 on: January 15, 2018, 06:43:39 pm »
Seems to be working fine for me.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 1313
  • Karma: +34/-32
Re: Firmware 7.25
« Reply #10 on: January 15, 2018, 07:13:07 pm »
I am thinking Sunday - gives folks some time to crash and report, and I will have time to fiddle with a factory reset.
Vera 3, 1.7.1030, CT101, Everspring motion sensor, GE/Jasco switch, Leviton outlet, AeonLabs sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual/Multi Switch, Weatherunderground, LB60Z-1 bulb, Hue, Alexa

Offline shashankmittal

  • Newbie
  • *
  • Posts: 11
  • Karma: +1/-0
Re: Firmware 7.25
« Reply #11 on: January 15, 2018, 09:40:41 pm »
I upgraded today evening. Found couple issues with my Fortrezz water valve and Schlage door lock. Support cases created for Vera.

Offline kigmatzomat

  • Sr. Member
  • ****
  • Posts: 347
  • Karma: +16/-0
Re: Firmware 7.25
« Reply #12 on: January 15, 2018, 11:12:18 pm »
At some point I will mount my spare wall switches  and sensors on a board to give my old Vera3 something to control while testing new firmwares.

Until then,
Godspeed, brave soldiers.

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 867
  • Karma: +5/-5
Re: Firmware 7.25
« Reply #13 on: January 16, 2018, 07:17:16 am »
I upgraded today evening. Found couple issues with my Fortrezz water valve and Schlage door lock. Support cases created for Vera.

What issues?

I have a few FortrezZ contact relays and all my locks are Schlage.

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 867
  • Karma: +5/-5
Re: Firmware 7.25
« Reply #14 on: January 16, 2018, 07:19:13 am »
I thought about it....waived off.  Figured I would wait to see how many melt downs are posted.  Running the latest beta now and it is the most stable firmware for me yet.

By "latest beta" do you mean v7.25b? Why not roll to the 7.25 release if the beta is performing well for you?