We have moved at community.getvera.com

Author Topic: Regressions with the 1.1.1183 beta just posted  (Read 76777 times)

Offline sjolshagen

  • Sr. Member
  • ****
  • Posts: 416
  • Karma: +5/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #45 on: February 04, 2011, 08:33:17 pm »
I'm using a USB stick on my Vera2 which was upgraded to v1.1.1183 as soon as it posted. For about 48(or so) hours, the Lua engine only restarted once every 8(ish) hours. As of 2:30pm ET today, I'm seeing roughly hourly restarts which (again) affect the reliability of luup.call_delay() functions (they get "lost"). I was pleasantly surprised by the initially much longer restart times (went from about 4-6 hours/restart to 8-12 hours/restart with 1.1.1183), but the acceleration I'm seeing now is a bit troubling.

I have _not_ rebooted my Vera2 to see if this is an anomaly as it may be of interest to Micasaverde to troubleshoot it (let me know and I'll open the system for tech support again)
Vera3/UI5 @ v1.5.622

Offline saf101

  • Sr. Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #46 on: February 04, 2011, 09:14:15 pm »
The upgrade went very smooth all seems working but was poking around with Scene and it seems like the tab remote is showing Received invalid response when this had a list of remote in 1.1.1047. Have the remotes move and also for IR in the third icon from the wizard has a drop down box but nothing in it.

Scott

Offline JimMac

  • Sr. Member
  • ****
  • Posts: 309
  • Karma: +2/-1
Re: Regressions with the 1.1.1183 beta just posted
« Reply #47 on: February 04, 2011, 11:43:42 pm »
I found another problem.  I have two Leviton RZCS4 4 scene controllers.  I decided to assign scenes to each button using the "Scenes" tab.  After assigning a scene for both on and off I did a "Save"  The scenes in the controller didn't work so I went back into each scene and looked at the auto_Generated scene and noticed that the "Enabled" box was not checked.  I checked it for all the scenes and did a "Save" again.  Looked at the scene again and once more the auto_Generated scene was not checked.  The off scenes do not work at all.  I programmed the scenes manually and removed all settings from the "Scenes" tab and everything except the off scenes worked again.
« Last Edit: February 07, 2011, 10:43:48 am by JimMac »

Offline ridgecat

  • Newbie
  • *
  • Posts: 12
  • Karma: +0/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #48 on: February 04, 2011, 11:56:20 pm »
Forward servers no longer work.  Updated to 1.1.1183. 

http://sta1.mios.com/locator_json.php reported the vera2 (though it still listed the previous firmware version)

http://fwd1.mios.com/username/password/serial/data_request?id=lu_alive or any other data request doesn't return anything, same when using fwd2.mios.com

I am forwarding over the Internet from my cell phone with no problems. Try fwd2.mios.com instead of fwd1.mios.com. [sorry about the fwd2 suggestion; I didn't see your comment about fwd2 in your original post. It's just late here.

Vera-2 running 1183.
« Last Edit: February 05, 2011, 12:13:01 am by ridgecat »

Offline ridgecat

  • Newbie
  • *
  • Posts: 12
  • Karma: +0/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #49 on: February 05, 2011, 12:19:21 am »
I found another problem.  I have two Leviton RZCS4 4 scene controllers.  I decided to assign scenes to each button using the "Scenes" tab.  After assigning each scene for both on and off I did a "Save"   <snip >  The off scenes do not work at all.  I programmed the scenes manually and removed all settings from the "Scenes" tab and everything except the off scenes worked again.

I have the same problem. When you activate a scene, does the green LED come on for about 5 seconds and then go out as does mine? If so, you can probably get the off scenes to run if you hit the button, wait about a second or so, then hit it again while the LED is still green. Let me know your experience.

Offline mda

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +9/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #50 on: February 05, 2011, 01:46:22 am »
With 1183 on ver2:

1. I am sometimes getting 2 or 3 notifications when i enter a pin on my kwikset lock. Other times I just get one.

2. Awhen i enter pin #1, the vera notification says I entered pin #2. All other pin notifications reference the correct pin.

I have reset the lock and added all pins again through Vera. That did not resolve either problem.

Offline sjolshagen

  • Sr. Member
  • ****
  • Posts: 416
  • Karma: +5/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #51 on: February 05, 2011, 08:24:41 am »
My LuaEngine restart frequency has remained consistent all through the night with a restart every 60 minutes. This is a problem for me since I've got luup/lua code that uses the call_delay function with a value of greater than 60 minutes and thus the action does not get triggered as the LUA engine got restarted.

I recognize that a Lua engine restart beats a full on Vera reboot, but frankly, the improvement is only marginal IMHO.
Vera3/UI5 @ v1.5.622

Offline sjolshagen

  • Sr. Member
  • ****
  • Posts: 416
  • Karma: +5/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #52 on: February 05, 2011, 08:40:26 am »
Just downloaded the LuaUPnP.log file to review from the last restart and it almost seems as if the LUA engine restarts because the energy reporting fails to connect with evt2.mios.com (get several "Operation timed out after 10000 milliseconds" messaged leading up to the following:

02      02/05/11 8:30:49.290    FileUtils::ReadURL pos: -1 ret 0 foo empty output:
error: curl: (28) Operation timed out after 10000 milliseconds with 0 bytes received <0x402>
2011-02-05 08:30:49 - LuaUPnP Terminated with Exit Code: 245

I'll be monitoring this going forward.
Vera3/UI5 @ v1.5.622

Offline sjolshagen

  • Sr. Member
  • ****
  • Posts: 416
  • Karma: +5/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #53 on: February 05, 2011, 10:43:33 am »
Quote
I'll be monitoring this going forward.

It's consistent. Every restart, on the hour, comes after curl timeouts and the File:ReadURL error listed above. I'm putting together a support incident report.

Additionally, it seems I can't send in a problem report from "Advanced"->"Tech Support". It fails with "Incorrect Response".
« Last Edit: February 05, 2011, 11:31:32 am by sjolshagen »
Vera3/UI5 @ v1.5.622

Offline pkitch

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #54 on: February 05, 2011, 11:07:50 am »
Scene notifications from Events are lost/deleted when saved.

Add a new scene notification, save it, come back and it has disappeared.

Offline RobertN

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +14/-6
Re: Regressions with the 1.1.1183 beta just posted
« Reply #55 on: February 05, 2011, 11:39:07 am »
Anyone getting any notifications? My Door opened with PIN code notification has not being received yet...

Offline JimMac

  • Sr. Member
  • ****
  • Posts: 309
  • Karma: +2/-1
Re: Regressions with the 1.1.1183 beta just posted
« Reply #56 on: February 05, 2011, 01:36:03 pm »
ridgecat

When I press a scene button on my RZCS4 4 scene controller the green LED flashes for a split second only.  I have not found a way to activate the "Off" scenes.  I have tried to quickly press the button then press it again, no results.  I can see the scenes listed in the Control tab, they look fine, I'm stumped.

Offline terencec

  • Jr. Member
  • **
  • Posts: 73
  • Karma: +0/-0
Re: Regressions with the 1.1.1183 beta just posted
« Reply #57 on: February 05, 2011, 01:47:21 pm »
UI has frozen but the Vera engine seems to be running normally judging by luup.log entries in PuTTY. This is the second instance since I upgraded.

Action messages under the device boxes no longer appearing.

3-in-1 temp sensor showing 18C when log shows 21C.

Continuous "Sever Busy" message on UI

Restart button not responding. Can get the "Edit Startup Lua" to show from MIOS Developers but clicking Go and Save clears the Save flag but otherwise appears to have no effect.

Closing the UI and opening a new instance solves the problem.

Offline ctbaker

  • Sr. Newbie
  • *
  • Posts: 44
  • Karma: +0/-0
  • White and Nerdy
Re: Regressions with the 1.1.1183 beta just posted
« Reply #58 on: February 05, 2011, 01:51:43 pm »
Anyone getting any notifications? My Door opened with PIN code notification has not being received yet...

My kid tried to open a kwikset lock about 30 mins ago and started jacking with the handle as soon as the code was entered causing the door to fail to operate and a text message went to my phone immediately.

Offline RobertN

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +14/-6
Re: Regressions with the 1.1.1183 beta just posted
« Reply #59 on: February 05, 2011, 02:21:11 pm »
Thanks - but I am still not getting any notifications. I see the logs as follows:

05-02-2011 01:04:58    Garage door opened UserID=\"3\" UserName=\"xxxx\"
Device Description    GarageEntr
Room    
Text    User: xxxx
11
Notifications to users
#    Username    Destination    Notification Type    Notification Result