Author Topic: Trick Tv iPhone app now working with fw 1.1.1183  (Read 5948 times)

Offline jasonhol

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Trick Tv iPhone app now working with fw 1.1.1183
« on: February 02, 2011, 06:37:41 pm »
Just thought I would give it a try and.................. IT WORKS!

Offline maks327

  • Sr. Newbie
  • *
  • Posts: 28
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #1 on: February 02, 2011, 08:34:22 pm »
I came on here to post the same thing! I thought it might work since the release notes mentioned a few tricktv type things, and sure enough, it works perfectly!!!  I'm pumped!

Offline maks327

  • Sr. Newbie
  • *
  • Posts: 28
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #2 on: February 03, 2011, 08:02:40 am »
After playing with it a bit last night, it appears that all lights and schlage locks in my system work fine with TrickTV. 

However, setting the temperature on my Trane Thermostat does not work correctly.  For instance setting the heat results in a value of 3 degrees less than I entered, and for some reason sets the cooling temperature to something else.

Offline jasonhol

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #3 on: February 03, 2011, 10:02:34 pm »
Yeah, I'm getting the same funky thermostat multiple degree heat/cool reversal thing also.  Maybe "someone" will fix it.

Offline strangely

  • Beta Testers
  • Master Member
  • *****
  • Posts: 3722
  • Karma: +34/-2
  • Vera 1,3 & V light
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #4 on: February 03, 2011, 11:12:35 pm »
Are you guys using your cp.mios.com login or did you create a new one?
Kwickset locks, HA01C, HA14C, HA02C, HA03C, HA05C, HA04C, HA07C, HA09C, Aeon HEM, GE 45604, 45606, 45609, ZDP100, VRF01-1LZ, WDTC-20, HA18WD, WDHA-12R, HRDS1, HM-TS001, AC1-ZW, TV-IP110, BL-C210A, LUUP control- EtherRain8, DSC Alarm, HDMI matrix, HR24-200, Panasonic TV, SQblaster

Offline maks327

  • Sr. Newbie
  • *
  • Posts: 28
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #5 on: February 04, 2011, 12:30:15 pm »
Yes same login as mios.  I guess I had set it up on 1047 fw.  TrickTV could see the device but no devices, scenes, etc.  After the update, it just began to work.

Offline strangely

  • Beta Testers
  • Master Member
  • *****
  • Posts: 3722
  • Karma: +34/-2
  • Vera 1,3 & V light
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #6 on: February 04, 2011, 12:31:46 pm »
Interesting as mine doesn't show any devices?!
Kwickset locks, HA01C, HA14C, HA02C, HA03C, HA05C, HA04C, HA07C, HA09C, Aeon HEM, GE 45604, 45606, 45609, ZDP100, VRF01-1LZ, WDTC-20, HA18WD, WDHA-12R, HRDS1, HM-TS001, AC1-ZW, TV-IP110, BL-C210A, LUUP control- EtherRain8, DSC Alarm, HDMI matrix, HR24-200, Panasonic TV, SQblaster

Offline wseverino

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 854
  • Karma: +0/-0
  • Da Man, Da Myth, Da Legend - in his own mind!
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #7 on: February 04, 2011, 03:21:00 pm »
No devices either.
My ZWave Network: Too friggin big to list.....

Offline maks327

  • Sr. Newbie
  • *
  • Posts: 28
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #8 on: February 04, 2011, 03:47:55 pm »
That's peculiar!!  I promise I'm not making it up! haha

Like I said, I set it up first on 1047, then upgraded to 1183.  I don't know if it's worth it to you guys to try a quick downgrade, but that's about the only difference I can think of.  I'm on a Vera2 that was just purchased about a month ago.

Offline titanfanzzz

  • Sr. Newbie
  • *
  • Posts: 26
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #9 on: February 04, 2011, 03:59:22 pm »
TrickTv is working for me, as well.  I had previously set it up under 1047, then deleted it when nothing showed up.  After seeing this thread, I re-downloaded it and works fine.  I did notice that it takes a longer time at start-up to recognize devices than Ivera does.  Takes several seconds if remote. 

Offline titanfanzzz

  • Sr. Newbie
  • *
  • Posts: 26
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #10 on: February 04, 2011, 04:01:43 pm »
I take that back.  It's automator.app that takes several seconds to recognize my stuff.  Seems to come right up with TrickTv.

Offline shady

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1324
  • Karma: +11/-0
  • This monkey knows his Window Coverings!
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #11 on: February 04, 2011, 04:23:13 pm »
Works for me remotely to my Vera 1 running 1182 (can't confirm operation, but found my devices).  Just used my standard log-in info, no new account needed.  I'll upgrade to 1183 later tonight and test.
Vera3 1.5.346, Schlage (3)DB (2)Lever, Kwikset (1)Lever, RCS TZ43 Thermo, (2) Vizia RZI06-1LX 600W Dimmers, (17) Monster (Leviton) Dimmers (6) Monster (Leviton) IWC Scene Controllers (1) Etherrain-8, (3) HSM 100's (1)GE 3-Way set

Offline garrettwp

  • Beta Testers
  • Master Member
  • *****
  • Posts: 6371
  • Karma: +227/-128
  • Vera 3, Lite, ISY994
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #12 on: February 04, 2011, 07:20:25 pm »
Just downloaded the app and used my login from cp.mios and all is working fine with 1.1.1183. It appears to have found all of my devices. I wish we could get more apps for android!

- Garrett

Offline nwrunner

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Trick Tv iPhone app now working with fw 1.1.1183
« Reply #13 on: February 04, 2011, 07:27:44 pm »
I tried the trick tv mios interface as soon as I upgraded last night and everything is working fine.  It did lock up once, but all lights activated, thermostat adjusted and schlang lock responded.  I couldn't believe it.

My scenes are not in the appropriate rooms however, but it does have the room designations, just wrong scenes.