Author Topic: New firmware update 7.0.25.01  (Read 3253 times)


Online Inzax

  • Sr. Member
  • ****
  • Posts: 389
  • Karma: +26/-64
Re: New firmware update 7.0.25.01
« Reply #1 on: January 30, 2018, 07:54:36 am »
Noticed I was not forced to the firmware update screen.....cautiously optimistic that this may be a new trend?

OR...the update is so minor they are not wanting to push the update with the usual constant reminder?

Edit: Also just discovered that when checking via the web interface for firmware updates that I am advised "running the latest version."
« Last Edit: January 30, 2018, 07:56:31 am by Inzax »
Proud Member of the Epic Smite Thread.
VeraSecure; Concord 4 Panel; 6 IP Cameras; Imperiehome; Housemodes; system monitor; DeusexmachinaII; Vera Concierge

Offline HSD99

  • Sr. Member
  • ****
  • Posts: 273
  • Karma: +11/-0
Re: New firmware update 7.0.25.01
« Reply #2 on: January 30, 2018, 02:36:16 pm »
I saw it via the firmware upgrade screen. Upgraded the test VP with no issues.

Online Inzax

  • Sr. Member
  • ****
  • Posts: 389
  • Karma: +26/-64
Re: New firmware update 7.0.25.01
« Reply #3 on: January 30, 2018, 05:56:04 pm »
I checked again.  NOW, I am seeing the upgrade option via the web interface settings/firmware.  I am not forced to this screen on login.  Very nice, especially since reading the firmware notes this update does not apply to my set up.
Proud Member of the Epic Smite Thread.
VeraSecure; Concord 4 Panel; 6 IP Cameras; Imperiehome; Housemodes; system monitor; DeusexmachinaII; Vera Concierge

Offline olftboy

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: New firmware update 7.0.25.01
« Reply #4 on: January 30, 2018, 06:53:38 pm »
New VeraPlus told me to upgrade and apparently the jump from 1.7.1786 to 1.7.3532 has locked my unit down.  Tried the 2 reset in 1 second and the 6 reset in 6 second tricks and I only have a green power light.  Bummer.  Now to figure out how to email or call for help.  :o

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 1306
  • Karma: +34/-32
Re: New firmware update 7.0.25.01
« Reply #5 on: January 30, 2018, 07:51:01 pm »
It would be nice if these informative webpages would be pushed to this forum by Vera staff.
Vera 3, 1.7.1030, CT101, Everspring motion sensor, GE/Jasco switch, Leviton outlet, AeonLabs sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual/Multi Switch, Weatherunderground, LB60Z-1 bulb, Hue, Alexa

Offline wezley69

  • Sr. Member
  • ****
  • Posts: 289
  • Karma: +6/-6
Re: New firmware update 7.0.25.01
« Reply #6 on: January 30, 2018, 08:06:32 pm »
I was forced to the firmware upgrade page.

Offline ccollinscj

  • Sr. Newbie
  • *
  • Posts: 34
  • Karma: +0/-0
Re: New firmware update 7.0.25.01
« Reply #7 on: January 30, 2018, 10:38:30 pm »
Well it has been upgrading now for an hour and it looks like it is locked up .....go figure.

Online svaleb

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +7/-7
Re: New firmware update 7.0.25.01
« Reply #8 on: January 31, 2018, 02:59:02 am »
Had problems : lua not loading, plugins not loaded, no tech support acces.
Sent support a mail, it seems to be fixed.
Update
Unfortunately it is not fixed, all LEDs are on again, but no contact.
Tried remotely but no acces to mcv (fault 522, host server down)
Update
No, vera plus is down, no connection, in spite of all LEDs are on. Sigh...
« Last Edit: January 31, 2018, 03:25:18 am by svaleb »

Online svaleb

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +7/-7
Re: New firmware update 7.0.25.01
« Reply #9 on: January 31, 2018, 03:38:57 am »
Just found this one !!!!!

Re: Vera Plus (working beautifully, then chose fw update - now just power light)
? Reply #59 on: January 30, 2018, 08:45:08 pm ?

Quote
Killed my new Vera Plus tonight with tonight's new firmware update.  It does not respond to 6 pushes of the reset button within six seconds.

***Update - I called customer care and they were outstanding.  Santiago dialed in and restored the firmware from a server.  It looks like this will be a problem for all Vera Plus units. 

For those who are about to go through it, they need to take control of your computer, Vera needs to be directly connected to your computer by ethernet and you need to connect to your network by wifi.  I'm someone who NEVER let any support share my computer, but even if you got a new unit from the store it would likely have the same problem.

Offline kwieto

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +27/-12
Re: New firmware update 7.0.25.01
« Reply #10 on: January 31, 2018, 05:09:20 am »
Seems that this update is passed step by step.
Yesterday I didn't see it, today I see it but only on my Plus (probably because update don't change anything for this controller)

Although on the page it is stated that upgrade to 7.0.25.01 is not needed if you already have 7.0.25, I decided to upgrade and did it couple of minutes ago without issues.

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 953
  • Karma: +81/-10
Re: New firmware update 7.0.25.01
« Reply #11 on: January 31, 2018, 06:21:37 am »
This addresses some key issues generated by the previous release with some of the controllers, as mentioned in the release notes. Other than that it contains all the fixes and additions from 7.24/7/25 firmware.

http://support.getvera.com/customer/en/portal/articles/2912913-ui7-%E2%96%BE-vera-software-update-%E2%96%BE-version-7-0-25-1-7-1017-1-7-3500-1-7-3501-1-7-3502-%E2%96%BE-january-15-2018
http://support.getvera.com/customer/en/portal/articles/2909666-ui7-%E2%96%BE-software-update-%E2%96%BE-version-7-0-24-1-7-1011-1-7-3452-1-7-3453-1-7-3454-%E2%96%BE-december-19-2017


And as always, should you have any issues with the upgrade, questions, comments, or concerns, please email us at support@getvera.com.
« Last Edit: January 31, 2018, 06:24:08 am by Sorin M. »
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline cormaza

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: New firmware update 7.0.25.01
« Reply #12 on: January 31, 2018, 10:47:32 am »
@Sorin M.
i have a vera plus unit and I'm having problems whit my unit since last 3 firmware upgrades.
i open a case whit vera support about 2 weeks ago, Bowdan is seen it.
yesterday i tray to upgrade to the new firmare, but i could't, the unit freeze and i had to make a factory reset. Now i have the message: /usr/bin/GetLatestVersion.sh: line 139: can't create /etc/cmh/version_latest: No space left on device

Could you please speed up my case?

Best Regards.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 1306
  • Karma: +34/-32
Re: New firmware update 7.0.25.01
« Reply #13 on: January 31, 2018, 05:33:36 pm »
It would be nice if these informative webpages would be pushed to this forum by Vera staff.

Sorin, thanks for posting this update on the forum. I gave you a +1.
Vera 3, 1.7.1030, CT101, Everspring motion sensor, GE/Jasco switch, Leviton outlet, AeonLabs sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual/Multi Switch, Weatherunderground, LB60Z-1 bulb, Hue, Alexa

Online svaleb

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +7/-7
Re: New firmware update 7.0.25.01
« Reply #14 on: February 01, 2018, 03:05:54 am »
@cormaza
Same problem here.
Maybe support is looking at it !??
But I have lost local acces.