Author Topic: NEO Coolcam iDoorbell  (Read 977 times)

Offline rotbard

  • Newbie
  • *
  • Posts: 17
  • Karma: +1/-0
NEO Coolcam iDoorbell
« on: February 05, 2018, 08:31:35 am »

Offline zedrally

  • Hero Member
  • *****
  • Posts: 1136
  • Karma: +12/-5
  • Black Cat Control Systems
Re: NEO Coolcam iDoorbell
« Reply #1 on: February 05, 2018, 04:58:12 pm »
I don't see were it says Z-Wave?
In any case, this device is not a Z-Wave  or Z-Wave Plus device, it uses both Sub G & WiFi frequencies but not the Z-Wave protocol.
The spec's make it confusing and most end users who glance over the frequencies available will assume that it is Z-wave when it isn't.



Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, Fantem Tec and then some  Black Cat Cat's Eye PIR's & Door-Window Sensors, RFXComm, Broadlink RMPro & Mini plus a Z-UNO or 2.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 1346
  • Karma: +35/-35
Re: NEO Coolcam iDoorbell
« Reply #2 on: February 05, 2018, 08:32:52 pm »
Operating range of 0-40C does not sound like an outdoor unit.
Vera 3, 1.7.1030, CT101, Everspring motion sensor, GE/Jasco switch, Leviton outlet, AeonLabs sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual/Multi Switch, Weatherunderground, LB60Z-1 bulb, Hue, Alexa

Offline zedrally

  • Hero Member
  • *****
  • Posts: 1136
  • Karma: +12/-5
  • Black Cat Control Systems
Re: NEO Coolcam iDoorbell
« Reply #3 on: February 05, 2018, 08:55:48 pm »
It is if your in the tropics.   ;)



Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, Fantem Tec and then some  Black Cat Cat's Eye PIR's & Door-Window Sensors, RFXComm, Broadlink RMPro & Mini plus a Z-UNO or 2.

Offline rotbard

  • Newbie
  • *
  • Posts: 17
  • Karma: +1/-0
Re: NEO Coolcam iDoorbell
« Reply #4 on: February 05, 2018, 11:59:04 pm »
From the item description:
Radio Frequency:
868.4MHz
 EU; 908.4MHz
 US; 921.4MHz
 ANZ; 869.2MHz

Maybe its only for the ring?
And video added as IP cam?

Sent from my SM-G900F using Tapatalk


Offline zedrally

  • Hero Member
  • *****
  • Posts: 1136
  • Karma: +12/-5
  • Black Cat Control Systems
Re: NEO Coolcam iDoorbell
« Reply #5 on: February 06, 2018, 12:10:08 am »
Yes, the frequency is correct but they do not support Z-Wave protocol.


Believe me, our company distributes much of the NEO range and these are NOT Z-Wave.
If they were then we would be selling them.


In Asia, they promote/sell/use what they call sub-G, best guess is that it is similar to 433mHz.
As to what the protocol used is - I have absolutely no idea and any attempts to get an explanation from the factory is neigh on impossible.
Someone might be able to reverse engineer the protocol but the reality is  that 433 or WiFi is a better bet as you can simply use http calls to control the device.
Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, Fantem Tec and then some  Black Cat Cat's Eye PIR's & Door-Window Sensors, RFXComm, Broadlink RMPro & Mini plus a Z-UNO or 2.

Offline rotbard

  • Newbie
  • *
  • Posts: 17
  • Karma: +1/-0
Re: NEO Coolcam iDoorbell
« Reply #6 on: February 06, 2018, 12:51:45 am »
Is there any door bell solution that work with Vera\z-wave ?

Should we wait for that:
https://youtu.be/vKSV0QkbCKs


Offline Kadencor

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: NEO Coolcam iDoorbell
« Reply #7 on: October 02, 2018, 08:55:03 am »
We have now tried two idoorbells. Neither have worked. They don't allow you to hear what the person ringing the bell has to say. It got hot and overheated within 60 seconds of being connected. There is no phone number to call for customer service. It took several months for it to be replaced. We are just Lee just recently received the second one when the first was returned shortly after Christmas. To be honest I'm not sure why we tried the same brand again. I can't think of one good thing to say about this particular model exclamation point

Offline prophead

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +5/-3
Re: NEO Coolcam iDoorbell
« Reply #8 on: October 02, 2018, 10:35:59 am »
http://doorbird.com
works perfectly with Vera, I recommend this product, I love it.
|-<:)

Is there any door bell solution that work with Vera\z-wave ?

Should we wait for that:
https://youtu.be/vKSV0QkbCKs