We have moved at community.getvera.com

Author Topic: Connection Issue DSC Plugin/IT100/BAFO BF810 ESV-Serial Adapt  (Read 2679 times)

Offline balez1

  • Sr. Newbie
  • *
  • Posts: 25
  • Karma: +0/-0
Hi together,

Base:   UI4   1.1.1047 .
            DSC  PC1832, IT100  11/2010, Rev003, USB/Serial BAFO BF810
            Plugin: 114
            Title: DSC Alarm Panel
            Version: 0.61


1/ Created automatically Serial Port OK, Name: pl2303
2/ Created New Devices with the plugin, NOK; the device has no name and impossible to create one! Is it normal? The attachment http://code.mios.com/trac/mios_dscalarmpanel#no1  show titel.
3/ Associated the serial Port with this "noname device", Ok
4/ Controlled the Alarm Device with pl2303  in Advanced Menu   Ok
5/ Variables:
ActivePartitions:  1   
MotionSensors :  1   
SmokeSensors:   1    
IODevice :          15
AutoConfigure:    1

Devicetype: urn:micasaverde-com:serviceId:AlarmPanel1

then Add, Close X, and hit Save

I have always the same device without the new subdevice Partition Menu.
Luup create this subdevice without connection to DSC PAnel?
Where is the mistake?

6/ Set Clock: No Change on DSC PAnel,  Server busy about 15 s, and Vera Clock is going automatically to XX H XX M 00s
7/ What is the access code? Master code, Installer Code, Maintenance Code ?

Thanks for reply,

Balez

Offline strangely

  • Beta Testers
  • Master Member
  • *****
  • Posts: 3722
  • Karma: +34/-2
  • Vera 1,3 & V light
Re: Connection Issue DSC Plugin/IT100/BAFO BF810 ESV-Serial Adapt
« Reply #1 on: February 27, 2011, 12:04:26 am »
You should post this in the main DSC thread really.

I suggest you take a read here:

http://forum.micasaverde.com/index.php?topic=5154.45 There are also some trouble shooting tips further back in the thread also.

You should be able to create the zones and partitions fine even if you don't have connectivity and you won't need to enter anything other than a regular user code.
Kwickset locks, HA01C, HA14C, HA02C, HA03C, HA05C, HA04C, HA07C, HA09C, Aeon HEM, GE 45604, 45606, 45609, ZDP100, VRF01-1LZ, WDTC-20, HA18WD, WDHA-12R, HRDS1, HM-TS001, AC1-ZW, TV-IP110, BL-C210A, LUUP control- EtherRain8, DSC Alarm, HDMI matrix, HR24-200, Panasonic TV, SQblaster