We have moved at community.getvera.com

Author Topic: Support for the new Danfoss Living Connect ?  (Read 50784 times)

Offline Gommasch

  • Sr. Newbie
  • *
  • Posts: 48
  • Karma: +0/-0
Support for the new Danfoss Living Connect ?
« on: April 20, 2011, 06:50:47 am »
Have You (MiCasaVerde) made support for the new Danfoss Living Conncect thermostats by now ?

Danfoss Living Connect

/Frank

Offline MikeT

  • Sr. Newbie
  • *
  • Posts: 30
  • Karma: +1/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #1 on: April 23, 2011, 02:47:11 am »
I sincerely hope, just placed an order for 12 for my house! I do have a plan B if all else fails to use their Link Controller panel to run the heating system...

Mike

Offline teonebello

  • Sr. Member
  • ****
  • Posts: 405
  • Karma: +0/-0
  • Macs, Home Automation, Bikers
Re: Support for the new Danfoss Living Connect ?
« Reply #2 on: May 09, 2011, 03:53:29 pm »
Any news? I also bought 2 of them.

Offline teonebello

  • Sr. Member
  • ****
  • Posts: 405
  • Karma: +0/-0
  • Macs, Home Automation, Bikers
Re: Support for the new Danfoss Living Connect ?
« Reply #3 on: May 10, 2011, 04:03:44 pm »
I bought also two. MiCasaVerde any news?

Thank you
Regards,
Matteo

Offline teonebello

  • Sr. Member
  • ****
  • Posts: 405
  • Karma: +0/-0
  • Macs, Home Automation, Bikers
Re: Support for the new Danfoss Living Connect ?
« Reply #4 on: May 23, 2011, 04:12:29 pm »
It seems working, but I have two problems:

- the current temperature is not shown in Vera
- if I update the temperature, then in ui4 I updates correctly. But if I update the temperature in the gui, then Vera is not able to wake up the sensor and update the temperature

Are you able to set up correctly the new danfoss living?

Thank you
Matteo

Offline zhouse

  • Sr. Newbie
  • *
  • Posts: 39
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #5 on: May 25, 2011, 04:24:26 am »
Our Vera is not able wake up our danfoss at all, and dont sending commands when it wake up by itself. Changes can be done only when danfoss do not sleeping.

Also commands auto, off, cool, heat doesnt work (ERROR Thermostat is not configured).

Current temperature is not shown as well.

Offline Daniel

  • Head of Customer Care
  • Administrator
  • Full Member
  • *****
  • Posts: 143
  • Karma: +2/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #6 on: May 25, 2011, 01:28:01 pm »
The Danfoss Living Connect thermostat only sets the setpoint for Heat. It is the only setpoint it supports and it doesn't do anything else.
The other commands (auto, off, cool etc) are there only because it is using a generic template for the thermostats.
Daniel Stefan ▾ Head of Customer Care
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline teonebello

  • Sr. Member
  • ****
  • Posts: 405
  • Karma: +0/-0
  • Macs, Home Automation, Bikers
Re: Support for the new Danfoss Living Connect ?
« Reply #7 on: May 25, 2011, 02:23:26 pm »
But it should be possible to see the actual temperature. Correct?

The Danfoss should have this informtaion.

Thank you
Matteo

Offline javene

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #8 on: May 27, 2011, 01:30:03 am »
Any support for this product yet?

Offline Gommasch

  • Sr. Newbie
  • *
  • Posts: 48
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #9 on: May 27, 2011, 05:02:53 am »
You can see the current heat setpoint - not the actual room temperature. For that You need a unit for instance like the ST814.
http://www.sparehuset.dk/sensorer/temperatur_og_fugt_sensor.htm

By the way - the BETA 1267 firmware supports the Living Connect Heat Setpoint.

<Link removed by an administrator. Posting links to unofficial firmware versions is not allowed.>
« Last Edit: May 31, 2011, 08:10:13 am by mcvflorin »

Offline Igster

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #10 on: August 15, 2011, 03:06:33 am »
should the danfoss set heat point work with 1.1.1337? I can't get it to work. "waiting for node to reply" shows up. As soon I wakeup the thermostat by hand (pressing a button) the temperature is changed.

Offline Gommasch

  • Sr. Newbie
  • *
  • Posts: 48
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #11 on: August 15, 2011, 04:25:16 am »
Which is normal. All battery operated devices fall asleep for x seconds before they automatically wake up and receive waiting orders - like a change to the heat set point.
Normally the Danfoss Living Connect is set to 900s which means that you will receive an error for up to 900 seconds before the temperature is changed. You can change the sleep time but remember that it will reduce battery life.

Offline computerScience

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #12 on: September 02, 2011, 09:51:19 pm »
Any updates on this? How is this working?

Offline HV

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Support for the new Danfoss Living Connect ?
« Reply #13 on: September 07, 2011, 06:21:42 am »
When I set the temperature in ui4 the termostats seems to receive the new temperature as it wakes up after 900sec, but the termostat do not adjust the valve to the new temperature until I press the select button. (When I press the select buttom the display lights up showing the new temperature and when the display goes off after some seconds I can hear the valve beeing adjusted.)
Have anybody made it working ?

Offline teonebello

  • Sr. Member
  • ****
  • Posts: 405
  • Karma: +0/-0
  • Macs, Home Automation, Bikers
Re: Support for the new Danfoss Living Connect ?
« Reply #14 on: September 21, 2011, 03:32:28 pm »
Any news about this great new device?