We have moved at community.getvera.com

Author Topic: Monster/Leviton clearance  (Read 47338 times)

Offline oTi@

  • Community Beta
  • Master Member
  • ******
  • Posts: 4041
  • Karma: +32/-6
  • UI what ?!
Re: Monster/Leviton clearance
« Reply #150 on: August 02, 2011, 08:46:26 pm »
Has anyone been able to adjust the ramp rate for the Dimmers?
It's different from the current Leviton's:

Engage air gap > Push back in and hold for 7 seconds / until locator + top LED blink > Locator will flash once per second (=set min. brightness) > Push paddle > Locator will flash twice per second (=set dim lock level) > Push paddle > Locator will flash thrice per second (=select fade rate) > Push paddle > Done.

For the fade rate:
1=1.5/3; 2=NF/NF; 3=NF/3; 4=0.5/3; 5=0.5/1.5; 6=1.5/5; 7=1.5/10.
(X=Y/Z; X=LED# (1=top, 7=bottom); Y=Fade On time / Z=Fade Off time, where NF=No Fade)

Quote
Anyone had any luck changing that behavior, is there a variable you can change like for GE?
Not sure this can be done through Z-Wave (there was some talk about that it might become available for the Leviton's though).
« Last Edit: August 02, 2011, 09:20:55 pm by oTi@ »
Dezwaved at the moment...

Offline shady

  • Hero Member
  • *****
  • Posts: 1331
  • Karma: +11/-0
  • This monkey knows his Window Coverings!
Re: Monster/Leviton clearance
« Reply #151 on: August 02, 2011, 09:10:14 pm »
Thank you @oTi !

I found instructions on the Homeseer forums, but they weren't written nearly as well as yours.  I'll give it a shot tonight.
Vera3 1.5.346, Schlage (3)DB (2)Lever, Kwikset (1)Lever, RCS TZ43 Thermo, (2) Vizia RZI06-1LX 600W Dimmers, (17) Monster (Leviton) Dimmers (6) Monster (Leviton) IWC Scene Controllers (1) Etherrain-8, (3) HSM 100's (1)GE 3-Way set

Offline kaldoon

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +0/-0
Re: Monster/Leviton clearance
« Reply #152 on: August 03, 2011, 08:18:44 am »
Here is the Instruction Sheet for the RZI06-1L Dimmer - see page 2 - Advanced  Features

Offline Broncswon

  • Sr. Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: Monster/Leviton clearance
« Reply #153 on: August 20, 2011, 12:00:58 pm »
Does anyone have the IWD600 setup in a 3-way configuration? If so what remote switch are you using?  I've tried everything with the VP00R-1LX.

Offline oTi@

  • Community Beta
  • Master Member
  • ******
  • Posts: 4041
  • Karma: +32/-6
  • UI what ?!
Re: Monster/Leviton clearance
« Reply #154 on: August 20, 2011, 12:07:42 pm »
Does anyone have the IWD600 setup in a 3-way configuration? If so what remote switch are you using?  I've tried everything with the VP00R-1LX.
Presumably, you'll need the older VZ00R.
Dezwaved at the moment...

Offline Broncswon

  • Sr. Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: Monster/Leviton clearance
« Reply #155 on: August 20, 2011, 12:29:19 pm »
Not the 1LX?  Do you have any idea which one?