Author Topic: Bosch solution 3000  (Read 799 times)

Offline Tk228

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Bosch solution 3000
« on: March 25, 2018, 05:52:08 am »
Trying to get the Vera edge to integrate with the Bosch Solution 3000, I am having issues with the LUA code failing and the handshake not being reciprocated.
Can any one help?


Sent from my iPhone using Tapatalk

Offline ComCall

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Bosch solution 3000
« Reply #1 on: April 03, 2018, 11:49:37 pm »
Looks like nobody has responded yet.
I am trying to do the same here in Australia. Spoken to Bosch Tech support. Only thing he says is it can be done, but not able to tell how.
They are trying to say certified installer only can do with commands. I'll try and talk to some others and see.

Offline vannpaul

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Bosch solution 3000
« Reply #2 on: April 10, 2018, 09:41:17 am »
are you using the Bosch Security plugin for the Vera Edge controller ?

Offline thatbluecable

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Bosch solution 3000
« Reply #3 on: May 24, 2018, 04:50:51 am »
did you ever have any luck getting it going?

Offline vannpaul

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Bosch solution 3000
« Reply #4 on: August 30, 2018, 10:24:59 am »
I haven't had the chance yet to try out the support instructions from Bosch yet. Once my house is built, and alarm installed, I will try to integrate it to veraplus. below are the instructions - (if you get it to work pls touch base with me)
----------------------------------------
Thank you for your enquiry regarding our Home Automation Solution for the 2000 & 3000 Bosch Alarm Panel.
Please note currently Vera Plug in works on Solution 2000/3000 with firmware version 1.3.
To install this option for your panel, you will need to install the Vera App on your device. Please follow the instructions
below in conjunction with the file downloads which I have attached. This will ensure your Vera App will be fully
operational on your Bosch Solution 2000 or 3000 panel.
Vera Instructions
1. Unzip the attached file,
2. Within the Vera webpage interface, go in to the ?Develop Apps? menu of the controller, and upload all of the
files to the controller.
3. Copy the contents of L_BoschSolutionAlarmPanel1.lua in to the Start-Up LUA tab
4. Restart the controller
5. Go back in to Develop Apps and select ?Create Device?.
Enter the following information;
Device Type ? Whatever you want the panel to appear as in your device list (ie ? ?Bosch Alarm?)
Internal ID ? A number needs to be entered here, it should have no impact on operation
Description ? Once again, whatever you want it described as in the Device List
Upnp Device Filename: D_BoschSolutionAlarmPanel1.xml
Upnp Implementation Filename: I_BoschSolutionAlarmPanel1.xml
IP Address: The internal IP address of the panel?s IP module
6. Then create the device,
7. Restart the Vera controller again.
If this information is unable to resolve your problem, please do not hesitate to call us and we will do our best to
respond promptly.
Thank you for choosing Bosch.

Offline TechPigeon

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Bosch solution 3000
« Reply #5 on: September 20, 2018, 02:27:46 am »
Just In case anyone is still interested you also need to enter in the Port of the IP Module, by default it is 7700, so the IP you enter into the Veras device should look a like this 192.168.0.1:7700

Offline mipakbet

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Bosch solution 3000
« Reply #6 on: October 11, 2018, 11:07:48 pm »
Hi, I'm considering the Bosch 3000. Any gotcha's/issues that you experienced?  Really only functionalities that I would like to control from Vera

- be able to arm/disarm alarm (home/away/stay modes)
- trigger outputs
- trigger scenes (eg. based on sensor status)