We have moved at community.getvera.com

Author Topic: HA14WD Question  (Read 2174 times)

Offline Chimpware

  • Sr. Member
  • ****
  • Posts: 426
  • Karma: +0/-0
HA14WD Question
« on: September 04, 2011, 10:47:32 am »
I am replacing the GE 3-way I have installed in my foyer as I cannot get it working no matter how I wired it (candy stripe to hot or neutral both result in dimmed 100% condition many have reported).  If I replace it with the HA14WD I have seen many people use, and use a standard 3-way switch as the slave, how does this work?  If the light is off and I switch the slave what lighting level do you get, the last one set at the master, or 100%?

Offline kaldoon

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +0/-0
Re: HA14WD Question
« Reply #1 on: September 05, 2011, 11:26:59 am »
It will go to the last Dim Level  8)

Offline Chimpware

  • Sr. Member
  • ****
  • Posts: 426
  • Karma: +0/-0
Re: HA14WD Question
« Reply #2 on: September 07, 2011, 12:27:21 pm »
Thx

Offline Chimpware

  • Sr. Member
  • ****
  • Posts: 426
  • Karma: +0/-0
Re: HA14WD Question
« Reply #3 on: September 09, 2011, 08:19:46 pm »
It will go to the last Dim Level  8)

No it doesn't it goes to 100%. Just finished installing it.