Author Topic: DataMine not working after update  (Read 510 times)

Offline AlexanderB

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
DataMine not working after update
« on: May 03, 2018, 11:13:46 am »
I was very pleased with Datamine2, but after updating to V1.7.3798 I got the 404 Error....?
Tried everything. reinstalling, deleating the whole lot with WinSCP and reinstalling again... No such luck..
I got a new VeraPlus, after moving everything from a Vera 3 (1 Week of work) to a Vera Plus I had Datamine2 installed.
Everything set up, and very pleased with it.
Untill I upgraded to V1.7.3798.... I got the 404 Error. Deleting everything and installing did not help anything.
Do not know what to do anymore, thinking of selling this piece of crap now.



Offline 4Crawler

  • Jr. Member
  • **
  • Posts: 73
  • Karma: +2/-0
Re: DataMine not working after update
« Reply #1 on: May 06, 2018, 11:03:34 am »
I see the see the same thing on my VeraPlus v1.7.3798.  Debug page comes up fine, but the graphing page results in a 404 error.

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: DataMine not working after update
« Reply #2 on: May 06, 2018, 01:20:26 pm »
They pulled the firmware upgrade due to many problems. I would suggest downgrading or get customer care assistance. Then you could probably fix DataMine2 back again.

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: DataMine not working after update
« Reply #3 on: May 17, 2018, 08:38:57 pm »
I just upgraded now, mine has the same error.

Logs:

50   05/17/18 20:46:22.689   luup_log:187: dataMine: Manual mounting to (/dataMine/) <0x77462520>
50   05/17/18 20:46:22.689   luup_log:187: dataMine: Mounting to UUID '0781:5406' <0x77462520>
50   05/17/18 20:46:22.705   luup_log:187: dataMine: Error reading tmpfile during UUID check <0x77462520>
50   05/17/18 20:46:22.720   luup_log:187: dataMine: No UUID mount '0781:5406' was found! <0x77462520>
50   05/17/18 20:46:22.738   luup_log:187: dataMine: Error reading tmpfile during mountcheck <0x77462520>

I'll play with the mount options but I checked fdisk and lsusb.
« Last Edit: May 17, 2018, 08:49:30 pm by tomtcom »

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: DataMine not working after update
« Reply #4 on: May 18, 2018, 08:51:32 pm »
I got it to work again. Formatted the USB and reinstalled the app. Then reboots and set the UUID manually as DM doesn't pick it up automatically for some reason.

Offline 4Crawler

  • Jr. Member
  • **
  • Posts: 73
  • Karma: +2/-0
Re: DataMine not working after update
« Reply #5 on: May 21, 2018, 01:05:10 am »
After updating to firmware 1.7.3831, DM2 seems to be working fine again.  It looks like it was running and collecting data (to USB /sda2) all along, just the graphing page was not working.  Only problem with the f/w update was it took out my VeraPlus.  Had to perform multiple factory resets to get it to reboot after the update.  But after that, it came up, restored a recent backup and all was back to normal.

Offline petclaud

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: DataMine not working after update
« Reply #6 on: June 13, 2018, 04:52:08 pm »
I got it to work again. Formatted the USB and reinstalled the app. Then reboots and set the UUID manually as DM doesn't pick it up automatically for some reason.

I have the same problem Data Mine not working anymore after the latest firmware update. The manual of Data Mine mentions the following for Data Mine installation on a Vera Edge: "Note that the above dialogue will not populate on a VeraEdge system and so it will be necessary to enter manual mount settings e.g. SetDataDirectory to "/dataMine/" and SetMountPoint to "/dev/sda1".

So I have set the data directory and the mount Point, but still no luck. You mention also the UUID - but I have no clue how to find that ID in the Vera Edge. Do you know how...?

Offline petclaud

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: DataMine not working after update
« Reply #7 on: June 13, 2018, 04:53:05 pm »
I got it to work again. Formatted the USB and reinstalled the app. Then reboots and set the UUID manually as DM doesn't pick it up automatically for some reason.

I have the same problem: Data Mine not working anymore after the latest firmware update. The manual of Data Mine mentions the following for Data Mine installation on a Vera Edge: "Note that the above dialogue will not populate on a VeraEdge system and so it will be necessary to enter manual mount settings e.g. SetDataDirectory to "/dataMine/" and SetMountPoint to "/dev/sda1".

So I have set the data directory and the mount point, but still no luck. You mention also the UUID - but I have no clue how to find that ID in the Vera Edge. Do you know how...?
(I have logging from Vera disabled - so I guess the inserted USB drive is only for Data Mine)
« Last Edit: June 13, 2018, 04:58:01 pm by petclaud »

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: DataMine not working after update
« Reply #8 on: June 13, 2018, 08:15:43 pm »
I got it to work again. Formatted the USB and reinstalled the app. Then reboots and set the UUID manually as DM doesn't pick it up automatically for some reason.

I have the same problem: Data Mine not working anymore after the latest firmware update. The manual of Data Mine mentions the following for Data Mine installation on a Vera Edge: "Note that the above dialogue will not populate on a VeraEdge system and so it will be necessary to enter manual mount settings e.g. SetDataDirectory to "/dataMine/" and SetMountPoint to "/dev/sda1".

So I have set the data directory and the mount point, but still no luck. You mention also the UUID - but I have no clue how to find that ID in the Vera Edge. Do you know how...?
(I have logging from Vera disabled - so I guess the inserted USB drive is only for Data Mine)

Hi,

I'm not sure if you have done SSH before but here is what you need to do.

1. download putty
2. connect with your IP, SSH, port 22
3. login with root and the password "may" be on your vera unit.
4. type lsusb
5. copy the correct UUID for your usb drive and input it in the variables tab


Offline petclaud

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: DataMine not working after update
« Reply #9 on: June 14, 2018, 02:19:59 pm »
Thank you very much for the fast reply!

Yes I am a bit familiar with SSH/PuTTY since I am also running two Raspberry's. Thx for the quick guide and all working again!!! :) :) :)

Thx a bunch!

Offline tomtcom

  • Hero Member
  • *****
  • Posts: 948
  • Karma: +21/-31
Re: DataMine not working after update
« Reply #10 on: June 14, 2018, 08:21:22 pm »
Most welcome!
Thank you very much for the fast reply!

Yes I am a bit familiar with SSH/PuTTY since I am also running two Raspberry's. Thx for the quick guide and all working again!!! :) :) :)

Thx a bunch!

Sent from my VS995 using Tapatalk