We have moved at community.getvera.com
« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)  (Read 5670 times)

Offline Tsviper

  • Sr. Newbie
  • *
  • Posts: 48
  • Karma: +4/-0
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #30 on: April 24, 2018, 12:42:26 pm »
Quote from: xeinth on April 23, 2018, 10:41:04 pm

Quote from: rgmessick on April 20, 2018, 01:27:18 pm
Quote from: Tsviper on April 20, 2018, 01:16:11 pm
Just updated yesterday.  Everything seemed to go well except after trying to verify the updated version on the firmware screen I got a message stating that the memory was full.  Everything went downhill from there and I was getting errors like "Error in Lua code in scenes and events" at the top of the UI.  I was no longer able to remotely access the unit or save any scenes or settings.  Turns out the memory on the unit was 98% full.  Called tech support and they were able to fix the issue by deleting the z-wave firmware files from other countries that were included in the update to release some memory.  Now I'm down to 81% full memory and everything is working again.  I email the beta feedback but just wanted to post my finding here in case anyone else had the same issue with the lates beta release.  Great experience with support and happy they were able to answer my call right away and resolve the issue.  These are beta after all and am very happy that they are willing to help resolve these issues right away.

I have to do the same thing after every upgrade. Before upgrading the device was at 71%, after upgrading 92% (I think), and after removing the other country's z-wave firmware was back down to 73%.

I have to do the same thing as well.  Why Vera refuses to fix this and instead manage all of these supoprt tickets manually doing the same thing is beyond me.  At the very least, automate deleting the unneeded files if you wont fix the partition.

X

So each day for some reason the z-wave firmware files re-download or something because they are back after deleting them the previous day.  I downgraded back to the last public firmware and at least I'm down to 90% full with the z-wave files.  Deleting them gets me down to 75% full but then the next day they reappear and I'm back to 90%.  Very strange.
Logged

Offline rafale77

  • Community Beta
  • Hero Member
  • ******
  • Posts: 1749
  • Karma: +101/-27
  • HA ≠ IoT as a blue sky is cloudless.
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #31 on: April 24, 2018, 01:38:35 pm »
Quote from: Tsviper on April 24, 2018, 12:42:26 pm
Quote from: xeinth on April 23, 2018, 10:41:04 pm

Quote from: rgmessick on April 20, 2018, 01:27:18 pm
Quote from: Tsviper on April 20, 2018, 01:16:11 pm
Just updated yesterday.  Everything seemed to go well except after trying to verify the updated version on the firmware screen I got a message stating that the memory was full.  Everything went downhill from there and I was getting errors like "Error in Lua code in scenes and events" at the top of the UI.  I was no longer able to remotely access the unit or save any scenes or settings.  Turns out the memory on the unit was 98% full.  Called tech support and they were able to fix the issue by deleting the z-wave firmware files from other countries that were included in the update to release some memory.  Now I'm down to 81% full memory and everything is working again.  I email the beta feedback but just wanted to post my finding here in case anyone else had the same issue with the lates beta release.  Great experience with support and happy they were able to answer my call right away and resolve the issue.  These are beta after all and am very happy that they are willing to help resolve these issues right away.

I have to do the same thing after every upgrade. Before upgrading the device was at 71%, after upgrading 92% (I think), and after removing the other country's z-wave firmware was back down to 73%.

I have to do the same thing as well.  Why Vera refuses to fix this and instead manage all of these supoprt tickets manually doing the same thing is beyond me.  At the very least, automate deleting the unneeded files if you wont fix the partition.

X

So each day for some reason the z-wave firmware files re-download or something because they are back after deleting them the previous day.  I downgraded back to the last public firmware and at least I'm down to 90% full with the z-wave files.  Deleting them gets me down to 75% full but then the next day they reappear and I'm back to 90%.  Very strange.

If you don't use a USB stick to store your logs, you might want to flush that too. There are a number of obsolete files the Vera keeps. Usually CS will log in and try to flush them for you if you contact them but yeah... it's not the most efficient use of time.
Logged
openLuup (79 devices, 141 scenes, 19 apps) master to VeraPlus (142 zwave nodes, 8 Zigbee nodes, 221 devices,  20 scenes , 2 apps) +  Hubitat (15 Zigbee nodes) + Home-Assistant (API Integrations). Bridged to Siri and Alexa. Homewave. VeraPlus ExtRooted and mios server independent.

Offline therealdb

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +6/-0
  • Automate all the things!
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #32 on: April 24, 2018, 02:31:37 pm »
Quote from: rafale77 on April 23, 2018, 03:03:23 pm
This is for scenes though. We may have the same thing for the startup lua in terms of # of lines?

yes, it seems to be limited to 65k chars. now I must decide to refactor everything (and that's not so easy?) or just move some logic to my Raspberry PI (via OpenLuup or C# under .NET Core). anyway, that's really bad, because modules in LUA are not very different in terms of performance from writing everything in a single block.
Logged
Vera Edge EU, Fibaro FGRM 222 (14), Fibaro FGS 223 (26), Fibaro FGS 222 (6), Fibaro UBS (2), Fibaro+N Plug (3), NeoCoolCam Door Sensor (3), PIR (2) & Plugs (2), Nest (3), Home Server running my own integrations, Harmony Hub, OpenSprinkler, Personal Weather Station, Sonoff TH & more

Offline therealdb

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +6/-0
  • Automate all the things!
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #33 on: April 24, 2018, 02:36:30 pm »
Anyway, I got a couple of "cannot write user data" today (at least 3) and subsequent unit freeze. I also had a couple of devices re-configured, loosing their correct configuration.

So far, I'm not impressed in a good way.
Logged
Vera Edge EU, Fibaro FGRM 222 (14), Fibaro FGS 223 (26), Fibaro FGS 222 (6), Fibaro UBS (2), Fibaro+N Plug (3), NeoCoolCam Door Sensor (3), PIR (2) & Plugs (2), Nest (3), Home Server running my own integrations, Harmony Hub, OpenSprinkler, Personal Weather Station, Sonoff TH & more

Offline hellovn

  • Sr. Member
  • ****
  • Posts: 279
  • Karma: +19/-46
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #34 on: April 27, 2018, 02:18:56 pm »
My Veraplus is showing "Can't detect device" for my hue bulbs. I have set the status "FailedStatusReport" in the hub and it was working great until the latest beta firmware.
Logged

Offline kwieto

  • Hero Member
  • *****
  • Posts: 624
  • Karma: +27/-15
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #35 on: April 28, 2018, 03:55:21 pm »
Quote from: therealdb on April 24, 2018, 02:36:30 pm
Anyway, I got a couple of "cannot write user data" today (at least 3)

Same here. In my case it results with problems with accessing the unit remotely, error about writing user data, but I don't have freezing of the controller
But I have such problems in one out of three controllers.
Logged

Offline zedrally

  • Hero Member
  • *****
  • Posts: 1224
  • Karma: +15/-5
  • Black Cat Control Systems
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #36 on: April 28, 2018, 05:48:07 pm »
With one of my test Edge's, the latest Beta flashed the UZB dongle (ACM0) back to default (tty) and deleted all devices. When reset back to ACMO it appears not to communicate, with CS ATM seeking a solution.
Otherwise I'll need to revert to the last "good" known FW version, but it's not good news for users who use a external radio.
Logged
Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, Fantem Tec and then some  Black Cat Cat's Eye PIR's & Door-Window Sensors, RFXComm, Broadlink RMPro & Mini plus a Z-UNO or 2.

Offline Mai Pensato

  • Full Member
  • ***
  • Posts: 228
  • Karma: +5/-1
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #37 on: April 30, 2018, 06:01:59 pm »
Installed this Beta on my test VeraPlus.  Paired a Fibaro Wallplug and Vera create two devices: the plug itself with on/off icon and an unnamed device with Watts and KWH. But this 2nd device does notning... Energy usage in Watts is shown on the main device as usual.  I never saw this before and I have several Fibaro wallplugs and also Everspring and Benext. Never saw this before...
When searching for a certain device when you want to pair it now all devices are listed randomly in stead of alphabetic order. Very difficult to find the right one.
These are certainly no improvements!!
Logged

Offline markd

  • Jr. Member
  • **
  • Posts: 67
  • Karma: +1/-1
Re: Beta Version 7.0.26b (1.7.1026/1.7.3754/1.7.3755/1.7.3760)
« Reply #38 on: May 01, 2018, 01:45:36 pm »
Also seen that devices are random order when including so tricky to find!
Logged

Offline Marieamase

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Beta Version 7 0 26b 1 7 1026/1 7 3754/1 7 3755/1 7 3760
« Reply #39 on: May 07, 2018, 06:57:41 pm »
There has been a new beta version posted to the forum that should address all problems reported to this point. I apologize for the extreme delay in getting this to you guys.  Thank you for your patience
Logged
Pages: 1 2 [3]   Go Up
« previous next »