Author Topic: Vera Plus Firmware update  (Read 1177 times)

Offline Clems

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Vera Plus Firmware update
« on: May 20, 2018, 08:18:35 am »
Hi,

Yesterday I would like to upgrade the latest firmware, but the Vera told me that :

Code: [Select]
/usr/bin/GetLatestVersion.sh: line 139: can't create /etc/cmh/version_latest: No space left on device

So what is the way to free some memory space, like log, cache, temps, etc ?


thank you !!

Offline therealdb

  • Full Member
  • ***
  • Posts: 171
  • Karma: +2/-0
  • Automate all the things!
Re: Vera Plus Firmware update
« Reply #1 on: May 20, 2018, 08:23:55 am »
Vera Edge EU, Fibaro FGRM 222 (12), Fibaro FGS 223 (20), Fibaro FGS 222 (5), Fibaro Universal Binary Sensor (2), Fibaro Plug (3), NeoCoolCam Door Sensor (3), NeoCoolCam PIR (2), Nest (3), Home Server running my own integrations, Harmony Hub, OpenSprinkler, Personal Weather Station, Sonoff TH & more

Offline Clems

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: Vera Plus Firmware update
« Reply #2 on: May 20, 2018, 01:07:00 pm »
you are right I faced the same problem on logging and offline controller.
I will check your link.


Thank you !

Offline JohnRob

  • Full Member
  • ***
  • Posts: 245
  • Karma: +12/-4
Re: Vera Plus Firmware update
« Reply #3 on: June 01, 2018, 12:32:28 am »
Hi,

After reading of multiple users with low memory issues (on VeraPlus not on the users).  I was wondering what the "System Monitor" plugin reports for free memory (assuming one has it installed).


I have had no memory issues (yet) and the system monitor reports
  "Mem Available 192620 kilo bytes" 

What do others have?





Online rafale77

  • Hero Member
  • *****
  • Posts: 1345
  • Karma: +67/-23
Re: Vera Plus Firmware update
« Reply #4 on: June 01, 2018, 01:31:58 am »
You are reporting the ram, not the storage. The firmware problem is a shortage of storage flash memory.
openLuup (97 devices, 134 scenes, 20 apps) controlling HomeAss + VeraPlus (138 zwave nodes, 8 Zigbee nodes, 205 devices, 20 scenes , 2 app) Bridged to Homekit and Alexa. VeraPlus ExtRooted!

Offline HSD99

  • Sr. Member
  • ****
  • Posts: 286
  • Karma: +11/-0
Re: Vera Plus Firmware update
« Reply #5 on: June 02, 2018, 04:49:51 pm »
You are reporting the ram, not the storage. The firmware problem is a shortage of storage flash memory.

If you have ALTUI installed, look under Misc---OsCommand---Free Space, and see what the /overlay partition shows as free space. If you can SSH into the Vera, run

df -h

the "disk free" command. It will give the same information.  The FLASH memory is the "disk", and is what is getting too full.

Offline JohnRob

  • Full Member
  • ***
  • Posts: 245
  • Karma: +12/-4
Re: Vera Plus Firmware update
« Reply #6 on: June 02, 2018, 06:30:11 pm »
@HSD99

Thanks, I found the df -h command.

Interesting thing,  I copied the results of the df -h command before my recent update and after.  There was virtually no change.   I do however have a relatively simple system.
  • 12 Z-Wave devices (no other devices)
    a few associations

    datamine2
    Multistring
    MySensors
    Wunderground.

Offline fyford

  • Jr. Member
  • **
  • Posts: 67
  • Karma: +0/-1