Author Topic: Vera Plus Firmware update  (Read 1394 times)

Offline Clems

  • Sr. Newbie
  • *
  • Posts: 23
  • Karma: +0/-0
Vera Plus Firmware update
« on: May 20, 2018, 08:18:35 am »
Hi,

Yesterday I would like to upgrade the latest firmware, but the Vera told me that :

Code: [Select]
/usr/bin/GetLatestVersion.sh: line 139: can't create /etc/cmh/version_latest: No space left on device

So what is the way to free some memory space, like log, cache, temps, etc ?


thank you !!

Offline therealdb

  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +6/-0
  • Automate all the things!
Re: Vera Plus Firmware update
« Reply #1 on: May 20, 2018, 08:23:55 am »
Vera Edge EU, Fibaro FGRM 222 (14), Fibaro FGS 223 (26), Fibaro FGS 222 (6), Fibaro UBS (2), Fibaro+N Plug (3), NeoCoolCam Door Sensor (3), PIR (2) & Plugs (2), Nest (3), Home Server running my own integrations, Harmony Hub, OpenSprinkler, Personal Weather Station, Sonoff TH & more

Offline Clems

  • Sr. Newbie
  • *
  • Posts: 23
  • Karma: +0/-0
Re: Vera Plus Firmware update
« Reply #2 on: May 20, 2018, 01:07:00 pm »
you are right I faced the same problem on logging and offline controller.
I will check your link.


Thank you !

Offline JohnRob

  • Full Member
  • ***
  • Posts: 245
  • Karma: +12/-4
Re: Vera Plus Firmware update
« Reply #3 on: June 01, 2018, 12:32:28 am »
Hi,

After reading of multiple users with low memory issues (on VeraPlus not on the users).  I was wondering what the "System Monitor" plugin reports for free memory (assuming one has it installed).


I have had no memory issues (yet) and the system monitor reports
  "Mem Available 192620 kilo bytes" 

What do others have?





Offline rafale77

  • Community Beta
  • Hero Member
  • ******
  • Posts: 1749
  • Karma: +101/-27
  • HA ≠ IoT as a blue sky is cloudless.
Re: Vera Plus Firmware update
« Reply #4 on: June 01, 2018, 01:31:58 am »
You are reporting the ram, not the storage. The firmware problem is a shortage of storage flash memory.
openLuup (79 devices, 141 scenes, 19 apps) master to VeraPlus (142 zwave nodes, 8 Zigbee nodes, 221 devices,  20 scenes , 2 apps) +  Hubitat (15 Zigbee nodes) + Home-Assistant (API Integrations). Bridged to Siri and Alexa. Homewave. VeraPlus ExtRooted and mios server independent.

Offline HSD99

  • Sr. Member
  • ****
  • Posts: 384
  • Karma: +20/-0
Re: Vera Plus Firmware update
« Reply #5 on: June 02, 2018, 04:49:51 pm »
You are reporting the ram, not the storage. The firmware problem is a shortage of storage flash memory.

If you have ALTUI installed, look under Misc---OsCommand---Free Space, and see what the /overlay partition shows as free space. If you can SSH into the Vera, run

df -h

the "disk free" command. It will give the same information.  The FLASH memory is the "disk", and is what is getting too full.

Offline JohnRob

  • Full Member
  • ***
  • Posts: 245
  • Karma: +12/-4
Re: Vera Plus Firmware update
« Reply #6 on: June 02, 2018, 06:30:11 pm »
@HSD99

Thanks, I found the df -h command.

Interesting thing,  I copied the results of the df -h command before my recent update and after.  There was virtually no change.   I do however have a relatively simple system.
  • 12 Z-Wave devices (no other devices)
    a few associations

    datamine2
    Multistring
    MySensors
    Wunderground.

Offline fyford

  • Jr. Member
  • **
  • Posts: 75
  • Karma: +0/-1