We have moved at community.getvera.com

Author Topic: Scheduling temperature changes on Trane TZEMT400  (Read 1601 times)

Offline brewster201

  • Sr. Newbie
  • *
  • Posts: 30
  • Karma: +0/-0
Scheduling temperature changes on Trane TZEMT400
« on: November 24, 2011, 11:19:43 am »
Hello how do you scheduling temperature changes on Trane TZEMT400 on myMIOS
I have setup different scenes with timers before but a little confused with scheduling temperature changes with the thermostat

Also this verification image for posting is a pain and hard to read lol

Thanks
Bruce

Offline haveitall

  • Sr. Newbie
  • *
  • Posts: 46
  • Karma: +0/-0
Re: Scheduling temperature changes on Trane TZEMT400
« Reply #1 on: November 26, 2011, 11:11:33 pm »
The way I did it was to just add the temp changes to scenes I already have running (some on timers, some on buttons).

For example, I have a 'bedtime' scene that turns off all the lights when I go to bed.  I added a temperature drop of a few degrees to that.  My 'wakeup' scene that runs automatically at 0630 during the week includes a return to normal temp.

The thermostat is just another device - select command 'set heat setpoint' '79' and 'leave it' ... to make it hot!
« Last Edit: November 26, 2011, 11:15:30 pm by haveitall »

Offline brewster201

  • Sr. Newbie
  • *
  • Posts: 30
  • Karma: +0/-0
Re: Scheduling temperature changes on Trane TZEMT400
« Reply #2 on: November 27, 2011, 08:38:30 am »
 :) Thank You that is the best way to do it

Bruce