Author Topic: Schlage BE469 "Getting Secure Classes"  (Read 200 times)

Offline engdahl

  • Newbie
  • *
  • Posts: 2
  • Karma: +1/-0
Schlage BE469 "Getting Secure Classes"
« on: May 25, 2018, 05:36:54 pm »
I have this lock and kept getting stuck at "Getting Secure Classes."  I have finally SOLVED this problem!  The process to include this lock is:  1.  Exclude the lock by putting the Vera in exclude mode and entering the six-digit code followed by zero "0" on the lock.  2.  Include the lock by putting the Vera in include mode and entering the six-digit code followed by zero "0" on the lock.  3.  When the Vera shows "Getting Secure Classes,"  enter the six-digit code followed by zero "0" on the lock AGAIN.  The lock will error out with a red X, but the Vera will continue and pair the lock successfully.

Offline edgebinary

  • Jr. Member
  • **
  • Posts: 62
  • Karma: +0/-0
Re: Schlage BE469 "Getting Secure Classes"
« Reply #1 on: May 30, 2018, 04:12:10 pm »
I think this might just be a coincidence. How close was the Vera to the lock when you were doing the pairing process?