We have moved at community.getvera.com

Author Topic: Fibaro Dimmer 2 FGD-212 , Can't Detect Device  (Read 2987 times)

Offline markoe

  • Full Member
  • ***
  • Posts: 137
  • Karma: +4/-3
Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« on: October 30, 2016, 03:59:24 am »
Vera UI (FirmWare 1.7.2138) shows "Can't Detect Device" message for my two Fibaro Dimmer 2 FGD-212 .

Everything seems to work, so I quess the message is some failing Z-ware status message etc,

Hope to see this fixed in furure Firmware update.

Offline Lex

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #1 on: October 30, 2016, 06:36:00 pm »
Im getting exactly the same. It goes when I turn the light on or off in devices for a while then comes back.

Offline Totalremote

  • Sr. Newbie
  • *
  • Posts: 43
  • Karma: +0/-0
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #2 on: October 31, 2016, 04:40:26 am »
Hi Markoe,

The answer provided by TheRedPill on post http://forum.micasaverde.com/index.php/topic,38602.msg289849.html#msg289849
Did it for me.

Good luck.
Vera Edge - 3 Fibaro Motion sensors - 2 Fibaro Door Sensors - 3 Fibaro Dimmer 2 - 1 Fibaro relay Switch - 1 Zipato Keypad - 3 Fibaro Wall Plugs - 1 Keyfob - 2 NodOn. More to come

Offline rmitsos

  • Sr. Newbie
  • *
  • Posts: 44
  • Karma: +1/-1
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #3 on: October 31, 2016, 05:13:36 am »
Well it's kind of weird, I have two of them and one is working out of the box and the other I just changed the pollsettings as suggested as i was getting the same message.

i think is a hit or miss ....

Offline Totalremote

  • Sr. Newbie
  • *
  • Posts: 43
  • Karma: +0/-0
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #4 on: October 31, 2016, 05:28:17 am »
I think it has something to do with the firmware of the dimmer 2.
I got an older one that had no problem and after I updated the firmware of the dimmer via a Fibaro HC2 I got this message from the "older" one aswell.
Vera Edge - 3 Fibaro Motion sensors - 2 Fibaro Door Sensors - 3 Fibaro Dimmer 2 - 1 Fibaro relay Switch - 1 Zipato Keypad - 3 Fibaro Wall Plugs - 1 Keyfob - 2 NodOn. More to come

Offline markoe

  • Full Member
  • ***
  • Posts: 137
  • Karma: +4/-3
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #5 on: November 04, 2016, 01:04:50 am »
Hi Markoe,

The answer provided by TheRedPill on post http://forum.micasaverde.com/index.php/topic,38602.msg289849.html#msg289849
Did it for me.

Good luck.

Thanks will look for that

Offline Sender

  • Hero Member
  • *****
  • Posts: 973
  • Karma: +552/-467
  • Sr. manager of my Vera
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #6 on: November 04, 2016, 03:28:02 am »
Eventually the error comes back. You'll have to keep clearing it.
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline robw

  • Sr. Newbie
  • *
  • Posts: 34
  • Karma: +0/-0
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #7 on: November 21, 2016, 02:32:44 pm »
Does anyone know if this has been raised as an issue with support? I'm assuming it needs a proper fix - the pollsetting set to 0 didn't work for very long for me at all.  :'(

Offline robw

  • Sr. Newbie
  • *
  • Posts: 34
  • Karma: +0/-0
Re: Fibaro Dimmer 2 FGD-212 , Can't Detect Device
« Reply #8 on: December 20, 2016, 04:08:29 pm »
Seems to be fixed properly with latest Firmware update  :)