Vera - Smarter Home Control Forum

General => Getting Started & Initial Setup => Topic started by: Sorin on April 01, 2017, 04:18:01 pm

Title: "Play nice" devices list
Post by: Sorin on April 01, 2017, 04:18:01 pm
This is not meant to be a complete listing of compatible devices and it does not replace our compatibility page (http://getvera.com/compatibility/). Instead it comes as an extension for devices that have may have not gone through our evaluation, but still known to "play nice" with Vera, even if sometimes they might have minor issues. This is based and updated by me, based on community input.

Please don't post devices that don't even work at basic level or have critical bugs. If you wish to report a bug, please use our support form (http://support.getvera.com/customer/portal/emails/new) or just create a topic in the dedicated category of this forum.
"Known to work" is only is valid for latest official UI7 firmware (http://support.getvera.com/customer/en/portal/topics/666697-release-notes/articles?b_id=712) and it does not include any Beta's or UI5/UI6. So please don't report if you are not running latest available firmware.

All reported devices will be updated on this first page.

For the purpose of keeping this topic nice and tidy and easy to read, I will delete any posts that do not follow the lines and purpose of this topic.


Thanks for everyone who is going to contribute to this list.




Alarms

- Fortrezz SSA2 (http://www.fortrezz.com/shop/siren-and-strobe-alarm)
Thermostats
- Ecobee (https://goo.gl/bCwiiI) Wifi Thermostat - works using third party plugin developed by Watou (http://forum.micasaverde.com/index.php/topic,13836.0.html)
- Heatit Z-Wave Thermostat: www.heatit.com/heating-control/floor-heating-thermostats/heatit-z-wave-thermostat/ (http://www.heatit.com/heating-control/floor-heating-thermostats/heatit-z-wave-thermostat/)

Energy
- Aeon HEM G2 (http://getvera.com/portfolio-posts/aeotec-home-energy-meter-2nd-edition/)

Doorbells
- Aeon Labs ZW056 Doorbell (http://aeotec.com/z-wave-doorbell)
- Doorbird D10X/D20X Series: www.doorbird.com (http://www.doorbird.com)
- Black Cat (AU) Siren and chime

Power Outlets, Dimmers & Lights
- GE Z-Wave In-Wall Smart Switch (https://byjasco.com/products/ge-z-wave-wireless-lighting-control-onoff-switch)
- GE Z-Wave In-Wall Smart Dimmer (https://byjasco.com/products/ge-z-wave-wall-smart-dimmer)
- Kichler Lighting 12387BK (http://www.kichlerlightinglights.com/product/kichler-lighting-z-wave-cabinet-lighting-12387bk.html)
- Philio/Black cat(AU) Single Relay In wall controller
- Philio/Black cat(AU) Double Relay In wall controller
- Philio/Black cat(AU) Single Relay In wall controller
- Zooz ZEN20 Z-Wave PLUS Smart Energy Power Strip (http://www.getzooz.com/zooz-zen20-power-strip.html)
- NEO Coolcam  (PN E-P16-A02-301)*needs additional configuration (http://forum.micasaverde.com/index.php/topic,48527.msg335300.html#msg335300/)

Door Locks
- Yale  (http://getvera.com/portfolio-posts/yale-key-free-touchscreen-deadbolt/)YRD120-ZW (http://getvera.com/portfolio-posts/yale-key-free-touchscreen-deadbolt/)
- Yale  (http://getvera.com/portfolio-posts/yale-touchscreen-lever-lock/)YRL220 (http://getvera.com/portfolio-posts/yale-touchscreen-lever-lock/)[
- Kwikset SmartCode Lever (http://getvera.com/portfolio-posts/kwikset-smartcode-lever-lock/)
- Schlage Connect Touchscreen Deadbolt (http://getvera.com/portfolio-posts/schlage-connect-touchscreen-deadbolt-with-camelot-trim/)

Sensors
- First Alert 2-in-1 Z-Wave Smoke Detector & Carbon (http://www.zwaveproducts.com/learn/blog/introducing-a-smoke-carbon-monoxide-alarm-to-your-z-wave-network)
- Monoprice/Vision motion sensors
- Everspring HSM02 (http://getvera.com/portfolio-posts/everspring-doorwindow-sensor/)
- Sensative Strips (http://www.sensative.com/strips.html)
- Linear/GoControl WADWAZ-1 (http://getvera.com/portfolio-posts/gocontrol-doorwindow-sensor/)
- Ecolink Tilt sensor (http://www.discoverecolink.com/product/tiltzwave2-eco/)- Vision/Monoprice Tilt Sensor ZG8101 (https://goo.gl/ZSwtXO)
- Vision/Monoprice ZS5101 Glass Break Sensor (http://getvera.com/portfolio-posts/vision-glass-break-sensor/)
- Aeon DSB05 (4in1 Gen5) (http://getvera.com/portfolio-posts/aeotec-multi-sensor-5/)- Linear/GoControl WAPIRZ-1 (http://getvera.com/portfolio-posts/gocontrol-motion-detector/)Gen 3
- Vision ZP3111-5 (4in1) (http://getvera.com/portfolio-posts/vision-4-1-sensor/)- Ecolink ECO-PIR (http://getvera.com/portfolio-posts/ecolink-motion-detector/)
- Zooz Z-Wave Plus Water Sensor ZSE30 (http://products.z-wavealliance.org/products/2204)
- Philio / Black cat(AU) 4 in 1 sensor
- Dome / Black cat(AU) Door window sensor
- Dome / Black cat(AU)Water detector
- Dome / Black cat(AU) Cat's eye PIR sensor
- NEO Coolcam  (E-D01-A4-310)*needs additional configuration (http://forum.micasaverde.com/index.php/topic,48527.msg335300.html#msg335300/)
- Handheld- ZRC-90 Scene Master (https://www.remotec.com.hk/wp-content/uploads/2016/06/8510_UM_V1.01_F820-8510-0000_20151113.pdf)
- NYCE (NCZ-3010) (http://nycesensors.com/products/ncz3010/)
Garage Door Openers
- Linear/GoControl/NuTone GD00Z-4 (http://getvera.com/portfolio-posts/gocontrol-garage-door-opener/)

Blinds & Window Covering Control
- Somfy Z-Wave RTS Interface (ZRTSI) (https://goo.gl/j5UD8D)- Autoview/Bali Z-Wave Somfy blinds (https://www.baliblinds.com/motorization/)

Cameras
- Amcrest IP2M-848E PTZ dome camera (http://forum.micasaverde.com/index.php/topic,48512.0)
- Amcrest IP2M-844EW (http://forum.micasaverde.com/index.php/topic,34649.msg319646.html#msg319646)
- Foscam 8xxxx and 9xxxx (http://forum.micasaverde.com/index.php/topic,25282.50.html)
- Hikvision (http://forum.micasaverde.com/index.php/topic,38475.msg290234.html#msg290234)
Title: Re: "Play nice" devices list
Post by: rafale77 on April 01, 2017, 04:45:11 pm
Thermostat: Ecobee

Energy: Aeon HEM G2

Dimmers and Light switch: All GE, Leviton, Cooper. Hue through the App. Monoprice/Vision Relays (single and dual)

Door Locks: Yale YRL and YRD zwave

sensors:
Monoprice/Vision motion sensors
EverSpring HSM02
Sensative Strips
Linear WADWAZ-1
Ecolink Tilt sensor
Vision ZG8101 (monoprice tilt)
Vision ZS5101 (monoprice glass break)
Aeon DSB05 (4in1)
Everspring Motion
Linear WAPIRZ-1
Vision ZP3111-5 (4in1)
Ecolink ECO-PIR

Garage Door Openers: Linear GD00Z-4 aka Go Control aka Lowes Iris

Blinds and Window Covering:
ZRTSI
Monoprice/Vision Curtain controller

Title: Re: "Play nice" devices list
Post by: Sorin on April 01, 2017, 04:55:10 pm
Hi Rafale,


I will update the list shortly. If you have devices that worked after "temporary" fixes, applied by support please let me know as well.
Also, exact model name and numbers is a plus.


Thanks much.



Title: Re: "Play nice" devices list
Post by: rafale77 on April 01, 2017, 05:05:05 pm
The only one which required help from support is the WAPIRZ-1 which you are very familiar with... All the others didn't need much. Maybe only some configuration.

Now if you want the Zigbee ones... I also had to do a lot of reconfiguration for HVAC vents:

Ecovent Zwave Vents
Keen Home Zigbee vents SV01-412-MP-1.0 and SV01-410-MP-1.0
Title: Re: "Play nice" devices list
Post by: Sorin on April 01, 2017, 05:08:35 pm
Got it, thank you for the immediate contribution.


Forgot to mentioned let's keep Zigbee devices outside of this topic, and I will create another topic for Zigbee.


But thank you for the idea.
Title: Re: "Play nice" devices list
Post by: adamb on April 05, 2017, 06:16:00 pm
Homeseer switches and dimmers work well for standard on / off / dim functionality, but as discussed in other posts they can't trigger scenes with double and triple taps.
Title: Re: "Play nice" devices list
Post by: Sorin on April 06, 2017, 07:20:59 am
Thank you Adam
Title: Re: "Play nice" devices list
Post by: RogerO on April 06, 2017, 09:25:07 am
Kichler Lighting 12387BK Z-Wave Full Range In-Line Dimmer works
Title: Re: "Play nice" devices list
Post by: ember1205 on April 06, 2017, 05:40:12 pm
While I like the concept of this page, I don't see it adding 'true' value unless specific pieces of information are included:

Which Vera hardware is the product working with?
Which UI build is it working with?
Are there any features that do not work with said Vera / Firmware?

For example: I have three Aeotec Window/Door Sensor 6 devices that work very well. Since I am using a VeraLite, I had to use the inclusion method that disables the Secure Mode on the devices because it isn't supported by my Vera hardware. This information would be useful for others with a VeraLite to know. Additionally, as firmware updates are release, we could check back in to indicate whether the devices continue to operate correctly. And, others with the same devices but different Vera hardware would ALSO be able to share whether the devices work for them or not.

Stating that "Known to Work" is only valid for the current firmware means that everything on this page is immediately invalidated as soon as a new firmware is released.
Title: Re: "Play nice" devices list
Post by: Sorin on April 10, 2017, 04:34:26 am
@ember1205


True value is added based on some background checks factors as well. As I'm continuously updating this list based on direct interactions we have at customer care team as well. So I'm not relying only on forum input, for an extra layer of confirmation.


UI7 firmware has only one head build and will be exactly the same on all Vera hardware. So if there's an incompatibility with one unit, it will be for all.
Latest available official release is the norm, and Known to work is based on this firmware.


If a new firmware release will break compatibility with a certain device in this list I will surely update it accordingly until this is fixed.


In regards to the "Secure/Unsecure mode" I don't really want to argue about this as I'm not R&D to decide if it's s good feature or not and in what aspect it affects and how many users.


However, I remember, from the training sessions we had with Sigma, that according to Z-wave certification guide lines, the z-wave chip, and gateway software, will detect if the device you want to pair is a security enabled or not and will pair it in accordingly.
The end user ability to choose this would be more useful for legacy users that have old hardware, I believe.
Z-Wave S2 framework will most likely remove this ability all together, leaving this decision in the hands of the Z-wave chip itself.
http://www.soundandvision.com/content/z-wave-alliance-fortifies-smart-home-security#l41pmBvKiDWbite0.97 (http://www.soundandvision.com/content/z-wave-alliance-fortifies-smart-home-security#l41pmBvKiDWbite0.97)


@RogerO


Thank your for the exact models.
Title: Re: "Play nice" devices list
Post by: Don Phillips on April 10, 2017, 07:40:59 pm
John, are you saying if I pair a Z-Wave Plus device on my Vera 3, it will pair as an unsecured device without my doing anything? I have not been buying Z-Wave Plus devices because I understood you needed to tell the device to pair unsecured, and not all devices have that ability.
Title: Re: "Play nice" devices list
Post by: Sorin on April 11, 2017, 07:50:02 am
Hi Don,


Yes indeed, Z-wave Plus chip is backwards compatible with Gen 3 and older devices, and it will of course pair with your Vera 3 using only the capabilities of your Vera 3 chip. But also, you need to have the latest version of UI7, which adds gen5 compatibility on older platforms.
Title: Re: "Play nice" devices list
Post by: Don Phillips on April 11, 2017, 07:04:32 pm
Thank you very much.  +1

I may get z-wave plus devices in the future instead of waiting until I upgrade to a Secure.
Title: Re: "Play nice" devices list
Post by: ALcALoIDe on May 11, 2017, 12:10:25 pm
May I add something here?

I am a noobie, am struggling trying to understand and make things work. I have a vera lite and now a vera plus. I bought an old apartment and took 3 whole years to retrofit it and it was based on automation in mind. It is 300m2 and I got every zwave switches and outlets and cameras and stuff all over the house. Some were bought without knowing that there was a compatibility list ( :o ) and am trying to make things work.

I have all my light dimmers and light switches from GE/Jasco and they work pretty ok, but on dashboard, most are not recognized as lights, so I don't have the option to "turn all lights off" with all my lights...

What I would suggest is, as UI7 is somewhat based on cloud, why not create a most used zwave devices database based on information collected by the cloud and try to focus on the most used ones...? That would not be so difficult, I believe.

Besides, it would be nice to, whenever a client asks for help on support, that they - based on databases - incorporate those devices with issues and solve those issues for good. This way, it would cover more and more people and the database would be the initial point...

And as those devices are playing nice, I would suggest to be written right aside the best way to include it at the network... In my case, with GE/Jasco switches, each time is something different, as I don't remember which one I used to include...
Title: Re: "Play nice" devices list
Post by: Sorin on May 28, 2017, 01:31:27 pm
Hello ALcALoIDe,


You are making a good point but not sure how it can be achieved at this moment in time.


As a suggestion, to your issue. It's possible that some lights may not be recognized with the correct category.


You can manually fix this yourself by going to the advanced settings of the device and look for variables Category and Subcategory and change them accordingly, with ones from this list: http://wiki.micasaverde.com/index.php/Luup_Device_Categories (http://wiki.micasaverde.com/index.php/Luup_Device_Categories)
Title: Re: "Play nice" devices list
Post by: rafale77 on May 31, 2017, 04:20:18 pm
Found another couple of devices which work well with the Vera:
The KAIPULE door sensor IM20-ZWAVE-USA although it requires manually configuring it as a door sensor
Also the Zooz leak sensor ZSE30
Title: Re: "Play nice" devices list
Post by: rafale77 on June 06, 2017, 04:54:58 pm
Can now add the Grabber/Bali Autoview series of window coverings which are Z-wave Plus.
Title: Re: "Play nice" devices list
Post by: Sorin on June 07, 2017, 09:08:41 am
Hello Rafale,


Thank you for the ongoing contribution.
I have added to the list the Zooz and Bali Somfy blinds as I have a few other confirmation sources.
KAIPULE door sensor IM20-ZWAVE-USA is still in the thread mentioned by you.


Thank you again.
Title: Re: "Play nice" devices list
Post by: rafale77 on June 08, 2017, 01:04:21 pm
Hello Rafale,


Thank you for the ongoing contribution.
I have added to the list the Zooz and Bali Somfy blinds as I have a few other confirmation sources.
KAIPULE door sensor IM20-ZWAVE-USA is still in the thread mentioned by you.


Thank you again.

Not sure what thread you are referring to on the KAIPULE...
Title: Re: "Play nice" devices list
Post by: Sorin on June 08, 2017, 01:26:49 pm
I meant to say, that if someone gets here, it will still see it in the thread, mentioned by you.
Title: Re: "Play nice" devices list
Post by: zedrally on July 26, 2017, 06:58:21 pm
You can add the following Black Cat & Philio devices to the list.

https://www.blackcatcontrolsystems.com.au/Black-Cat-ZWBCL1-Single-Relay-in-Wall-Controller (https://www.blackcatcontrolsystems.com.au/Black-Cat-ZWBCL1-Single-Relay-in-Wall-Controller)


https://www.blackcatcontrolsystems.com.au/Black-Cat-Z-Wave-240VAC-ZWBCL2-Double-Relay (https://www.blackcatcontrolsystems.com.au/Black-Cat-Z-Wave-240VAC-ZWBCL2-Double-Relay)


https://www.blackcatcontrolsystems.com.au/In-Wall-Switch-Controllers/Black-Cat-Controllers/Black-Cat-Z-Wave-Blind-Shutter-Awning-Controller (https://www.blackcatcontrolsystems.com.au/In-Wall-Switch-Controllers/Black-Cat-Controllers/Black-Cat-Z-Wave-Blind-Shutter-Awning-Controller)


https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Enabled-Alarms/Black-Cat-Multi-Message-Centre (https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Enabled-Alarms/Black-Cat-Multi-Message-Centre)


https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/Black-Cat-4%20in-1-Sensor (https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/Black-Cat-4%20in-1-Sensor)


https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/BlackCat-Door-Window-Sensor (https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/BlackCat-Door-Window-Sensor)


https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/BlackCat-Z-Wave-Plus-PIR (https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/BlackCat-Z-Wave-Plus-PIR)


https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/Black-Cat-Flood-Sensor-Alarm (https://www.blackcatcontrolsystems.com.au/Security-%20Sensors-CCTV-Detectors/Z-Wave-Plus-PIR's/Black-Cat-Flood-Sensor-Alarm)





Title: Re: "Play nice" devices list
Post by: laalves on August 30, 2017, 03:10:12 pm
Hi,

You can also add the following devices:

- Heatit Z-Wave Thermostat: www.heatit.com/heating-control/floor-heating-thermostats/heatit-z-wave-thermostat/

- Doorbird D10X/D20X Series: www.doorbird.com

I have 2 x first, 1 x second and are working just fine.

Cheers, L
Title: Re: "Play nice" devices list
Post by: Sorin on August 31, 2017, 06:20:54 pm
Thanks everyone.


List updated
Title: Re: "Play nice" devices list
Post by: gzappala on October 15, 2017, 02:27:30 am
I have two NYCE (NCZ-3010) Hinge Door sensors working flawlessly with VeraPlus UI7.
Title: Re: "Play nice" devices list
Post by: Sorin on October 15, 2017, 04:52:16 pm
Added, Thank you.
Title: Re: "Play nice" devices list
Post by: gzappala on October 17, 2017, 01:17:39 am
Please also add: Zooz ZEN20 Z-Wave PLUS Smart Energy Power Strip
Title: Re: "Play nice" devices list
Post by: Sorin on October 17, 2017, 05:49:10 am
Thanks,added
Title: Re: "Play nice" devices list
Post by: zedrally on October 20, 2017, 09:08:26 pm
John, please add Black Cat LED Dimmer (AU) ZWBCLD1 to the list.
Title: Re: "Play nice" devices list
Post by: kdschlosser on November 10, 2017, 11:41:42 am
I want to comment that not all GE/JASCO switches work properly. Unless all functionality works it cannot be added to the list. there are dimmers that have 2 problems. when Vera heals the network it causes the lights to flash. and you are also not able to set the z wave ramping properties. These problems occur only when connected to a Vera I have tested it with 2 other z wave controllers and these problems do not occur.
Title: Re: "Play nice" devices list
Post by: reneboer on November 28, 2017, 05:44:14 am
Hi,

Just added a couple of NEO Coolcam devices. Their power plugs (PN E-P16-A02-301) work, but when including them you must select the Generic Z-Wave device, do the inclusion as instructed (click button 3 times) and wait for the 60 second time to expire. Then pull the plug out of the socket, put it back in and the inclusion process will continue. Bit odd, but was the case with all three I added. All reporting etc seems to work nicely, even voltage and amps.

Their flood sensor (PN: E-D01-A4-310) got included as a generic IO device so I had to change the attributes. Category = 4, device_file D_FloodSensor1.xml, device_json D_FloodSensor1.json. Now it all works as it should.

Cheers Rene
Title: Re: "Play nice" devices list
Post by: Sorin on November 28, 2017, 08:53:28 am
Thank you for your contribution, Reneboer.
Title: Re: "Play nice" devices list
Post by: kwieto on November 28, 2017, 06:16:34 pm
Just added a couple of NEO Coolcam devices. Their power plugs (PN E-P16-A02-301) work, but when including them you must select the Generic Z-Wave device, do the inclusion as instructed (click button 3 times) and wait for the 60 second time to expire. Then pull the plug out of the socket, put it back in and the inclusion process will continue. Bit odd, but was the case with all three I added.

In my case it just got included without any tricks needed (EU version).
Have about 6 different units around the house
Title: Re: "Play nice" devices list
Post by: kwieto on November 28, 2017, 06:27:37 pm
What about devices which are known to work (they are on the list of pre-defined devices during pairing), but aren't mentioned in compatibility list on the website?

Like Fibaro Smoke sensor, Door Sensor (1), Universal Binary sensor...
Title: Re: "Play nice" devices list
Post by: szopen on January 09, 2018, 03:13:38 pm
Most of them works great (everything tested in EU version, most devices from my list are in everyday use, but some tests have not been very long till now).


door/window sensor:

Sensative Strips Guard (model Strips Ma-Zw)
works good

Schweiger ZHS09 Door/Window Sensor (probably branded Vision ZD2102)
works good, I can reccomend it for use with 2,3,4-leaf window (supports external passive sensors)

Zipato vs-zd2102.eu (probably branded Vision ZD2102)
works good, I can reccomend it for use with 2,3,4-leaf window (supports external passive sensors)

Fibaro FGK-10x (it means models from FGK-101 to FGK-107 - they differ only by casing colors)
works good, can be used also with external temperature sensor DS18B20 (or as 1-in binary sensor but it can't be used as dooor/window sensor in this config)

Aeotec ZW112 Door/Window Sensor 6 *
works good


door sensor:

Aeotec ZW089 Recessed Door Sensor Gen5*
works good, but hard to mount (fitting only specific door frame)


smart plug on/off:

NEO Coolcam NAS-WR01Z Power plug
works good

Aeotec ZW096 Smart Switch 6 *
works great

Fibaro FGWPE/F-102 ZW5
works great


smart plug dimmer:

Aeotec ZW099 Smart Dimmer 6 *
works great, but the only device I had, was selfdamaged after only half a year of use


LED RGBW bulbs:

Aeotec ZW098 LED Bulb Gen5 *
works good, but I do NOT reccomend this, because of an unpleasant shade of white light


LED white bulbs (on/off/dim):

Domitech ZE27EU *
works great, best shade of warm white (2700K)


multisensors:

Vision ZP3102eu-5 Security PIR Motion Sensor Gen5  (PIR+temp) *
works good, but temp is inaccurate (+-2 degrees C)

Aeon Labs ZW100 MultiSensor 6 (PIR+temp+humidity+light+UV+tamper) *
works great

Aeon Labs ZW074 MultiSensor Gen5 (PIR+temp+humidity+light) *
works good, but I do NOT reccomend this, this is obsolete product (powered by AAA batteries and drains them quick!)


remote controllers:

Nodon CRC-3-1-0x Octan Remote 4-key
works good

Nodon CRC-3-6-0x remote 4-key
works good

Nodon CWS-3-1-0x wall switch (remote) 4-key
works good

x - at Nodon means color of casing, 1=white

siren:

Popp POPE005107 External solar siren
works good, but needs to be exposed to Sun one day before installation or some days if they are cloudy (and has errors in manual, but real life installation is easier  then described)


smoke sensor:

Popp POPE004001 Smoke sensor with siren
works good

water leak sensor:

Everspring ST812 Flood Sensor
works good, but I do NOT reccomend this, this is obsolete product (powered by AA cells)

RFID:

Zipato wt-rfid.eu Mini RFiD Keypad
works good, but  I do NOT reccomend this, because of VERY high battery drain (and powered by AA batteries)


to be continued... (I will add much more devices to this list, when I will have more time)

I haven't check compatibility list a long time, so...
* - devices with asterisk near type/model are officially suported and could be find there:
http://getvera.com/compatibility/



There are some of devices which should be supported (in spite of I/others would or wouldn'n reccomend them because of other reasons), so there should be second list of devices, where Vera support could reply: "this device will not be supported"="don't buy it" or "we have this device in our future support plans"

short list of devices NOT working/working partially (some of them just need working template) - this list may not be actual (I'm copying this from my notes)
- D-Link DCH-Z510
- NEO Coolcam NAS-PD01Z PIR/light sensor
- NEO Coolcam NAS-PD02Z PIR/light sensor
- NEO Coolcam NAS-DS01Z door/window sensor
- NEO Coolcam NAS-WS01Z Water Sensor
- Fibaro Swipe
- Danfoss LC-13
- Eurotronic Comet Z
- Popp POPE005206 Z-weather (this is probably the only weather station with z-wave?)
- Popp POPE700168 pluviometer (as above)
- Zipato BULB2 (model: rgb2) this could be great - best shade of warm white (2700K), but out of the box works only as "on/off/dim"




And last thougt: about non-z-wave devices - last (december 2017) situation with plugins supporting ie. TP-Link, Yeelight or Broadlink devices shows me that I can NOT rely on  external plugins?
I've bought some of that devices when I saw working plugins, but now I'm alone with working stuff which could not be integrated with Vera (I'm not programmer...)
Title: Re: "Play nice" devices list
Post by: reneboer on January 10, 2018, 04:43:09 am
Just added a couple of NEO Coolcam devices. Their power plugs (PN E-P16-A02-301) work, but when including them you must select the Generic Z-Wave device, do the inclusion as instructed (click button 3 times) and wait for the 60 second time to expire. Then pull the plug out of the socket, put it back in and the inclusion process will continue. Bit odd, but was the case with all three I added.

In my case it just got included without any tricks needed (EU version).
Have about 6 different units around the house
I found that I was not clicking the button fast enough to include. You really need to click three times fast.
However, by now I have blew out three of these. They do not seem to like being on the same line as TL lights. When without a load and you turn of the TL lights they may blow and take the fuses out too. So I will not buy them anymore.

Cheers Rene
Title: Re: "Play nice" devices list
Post by: kwieto on January 11, 2018, 06:20:26 am
When without a load and you turn of the TL lights they may blow and take the fuses out too. So I will not buy them anymore.

What are TL lights?
I didn't encounter such problems having various equipment connected to the plug (heater, led lamps, impulse charger, etc.)
However, some of the devices were stuck shortly after installing (no connection to the controller, red light on the unit). Unpluging and pluging again into the socked solved the problem and from that time no problems here (the oldest one has about 1 year)
Title: Re: "Play nice" devices list
Post by: reneboer on January 11, 2018, 06:51:48 am
When without a load and you turn of the TL lights they may blow and take the fuses out too. So I will not buy them anymore.

What are TL lights?
TL lighting is fluorescent tube lighting as used in offices or a garage in my case.

Cheers Rene
Title: Re: "Play nice" devices list
Post by: pit on March 02, 2018, 11:08:11 am
thermostat Popp POPE010101 (=danfoss with actual temperature display)
->inclusion as generic zwave device, no problem since 2 y
!! poll interval has to be set to 0 (otherwise every 2nd wakeup fails)

universal sensor Fibaro FGBS321
->inclusion as generic zwave device, no problem since 2 y

wall plug switch Popp POPE009006
->inclusion as generic zwave device, no problem since 1 y (but no inductive workload allowed)

wall dual relay Philio PAN06-1B and PAN06-1B (inductive workload works)
-> inclusion as generic zwave device, no problem since 2 y
!! factory reset only successfull without switch workload
Title: Re: "Play nice" devices list
Post by: zslash on April 16, 2018, 10:18:52 am
Has anynone tested the Philo Smart Dimmer Socket PAD02 ?
https://products.z-wavealliance.org/products/2355
Title: Re: "Play nice" devices list
Post by: kwieto on April 26, 2018, 05:31:33 am
Devolo wall switch/controller (clone of the POPP 009303 wall controller)
Works fine with 4 buttons (short press), didn't manage it to respond to double or long press.

Should be similar for the keyfob (also a clone of POPP device)
Title: Re: "Play nice" devices list
Post by: tunnus on May 31, 2018, 07:56:05 am
...wall dual relay Philio PAN06-1B and PAN06-1B (inductive workload works)
-> inclusion as generic zwave device, no problem since 2 y
!! factory reset only successfull without switch workload

Any idea how to do secure inclusion with Vera?
Title: Re: "Play nice" devices list
Post by: reneboer on June 01, 2018, 06:31:09 am
...wall dual relay Philio PAN06-1B and PAN06-1B (inductive workload works)
-> inclusion as generic zwave device, no problem since 2 y
!! factory reset only successfull without switch workload

Any idea how to do secure inclusion with Vera?
It should do that when keeping to close enough (1 meter, 3 feet) to your Vera when including. It may not when it is further away and does a network inclusion via a third device.

Cheers Rene
Title: Re: "Play nice" devices list
Post by: rafale77 on June 03, 2018, 10:00:38 pm
...wall dual relay Philio PAN06-1B and PAN06-1B (inductive workload works)
-> inclusion as generic zwave device, no problem since 2 y
!! factory reset only successfull without switch workload

Any idea how to do secure inclusion with Vera?
It should do that when keeping to close enough (1 meter, 3 feet) to your Vera when including. It may not when it is further away and does a network inclusion via a third device.

Cheers Rene

Humor me but I actually experienced the opposite. Taking the device too close to the vera makes the secure key exchange fail because... the vera is too slow and the device sends its key faster than the vera can be ready to take it. I am now having to be at least 2 nodes away to be able to do a secure inclusion on some devices. This adds lag to the communication through the mesh which then gives the vera a chance to get the key. That being said, all the nodes in between need to support secure transmission too or it will just fail.
Title: Re: "Play nice" devices list
Post by: reneboer on June 04, 2018, 04:42:56 am
...wall dual relay Philio PAN06-1B and PAN06-1B (inductive workload works)
-> inclusion as generic zwave device, no problem since 2 y
!! factory reset only successfull without switch workload

Any idea how to do secure inclusion with Vera?
It should do that when keeping to close enough (1 meter, 3 feet) to your Vera when including. It may not when it is further away and does a network inclusion via a third device.

Cheers Rene

Humor me but I actually experienced the opposite. Taking the device too close to the vera makes the secure key exchange fail because... the vera is too slow and the device sends its key faster than the vera can be ready to take it. I am now having to be at least 2 nodes away to be able to do a secure inclusion on some devices. This adds lag to the communication through the mesh which then gives the vera a chance to get the key. That being said, all the nodes in between need to support secure transmission too or it will just fail.
That sounds too 'funny' indeed. Weird for sure.
Title: Re: "Play nice" devices list
Post by: bruring on August 26, 2018, 08:56:40 am

Aeon Labs ZW074 MultiSensor Gen5 (PIR+temp+humidity+light) *
works good, but I do NOT reccomend this, this is obsolete product (powered by AAA batteries and drains them quick!)

I have both gen 5 and gen 6 Multisensors, and I found that the Gen 5 creates ghost devices on a quite regular basis. The only way to fix this is to delete the "mother" sensor device and re-add everything...