Vera - Smarter Home Control Forum

Beta and Pre-Release (Public) => Vera UI discussion => Topic started by: bmxer4l1fe on April 20, 2017, 03:06:13 am

Title: Scene Options
Post by: bmxer4l1fe on April 20, 2017, 03:06:13 am
1) ability to run a scene only if multiple conditions are met. 

example:
  Run scene when motion is detected on both device 1 and device 2.   Or between the hours of X. 

2) ability to run scenes based on a multi level sensor change:  and ability to set levels on multi level devices in a scene

example: light set from 100% to 50% on device 1,  set device 2 to device 1 value.


Title: Re: Scene Options
Post by: Don Phillips on April 20, 2017, 06:55:10 pm
Take a look at the PLEG plug-in. It does AND logic and schedules.  Another option is to use the Virtual Switch and Combination Switch plug-in. They can be used to emulate AND. Schedules would be part of the scene logic.