Vera - Smarter Home Control Forum

General => Upgrading => Topic started by: copekyle on May 19, 2015, 11:57:27 am

Title: UI7 Firmware Custom URL's
Post by: copekyle on May 19, 2015, 11:57:27 am
So with UI7 being so hit and miss, I think it would be good to have a list of the custom urls for each firmware version.  I'm sick of calling vera to downgrade.  These all should be compatible with VeraLite and Vera3.  If you see anything wrong, please let me know.  I'll do my best to consolidate all links that are posted in this thread into the first post.  Thanks all that contribute links.

VeraLite and Vera 3 links:
UI7 7.0.RC: http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.318-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.318-en-mios.squashfs)
UI7 7.0.1  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.388-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.388-en-mios.squashfs)
UI7 7.0.2  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.439-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.439-en-mios.squashfs)
UI7 7.0.3  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.481-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.481-en-mios.squashfs)
UI7 7.0.4  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.513-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.513-en-mios.squashfs)
UI7 7.0.5  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.541-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.541-en-mios.squashfs)
^^ This release should NOT have Monoprice motion and door sensors "always tripped" issue. 7.0.6 and .7 both have issue^^
UI7 7.0.6  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.569-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.569-en-mios.squashfs)
UI7 7.0.7  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.583-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.583-en-mios.squashfs)
UI7 7.0.8  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.599-en-mios.squashfs (http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.599-en-mios.squashfs)
UI7 7.0.9  : http://download.mios.com/709/rt3662_Luup_ui7-1.7.619-en-mios.squashfs (http://download.mios.com/709/rt3662_Luup_ui7-1.7.619-en-mios.squashfs)
UI7 7.0.10  : http://download.mios.com/710/rt3662_Luup_ui7-1.7.649-en-mios.squashfs (http://download.mios.com/710/rt3662_Luup_ui7-1.7.649-en-mios.squashfs)

Vera Edge Links
UI7 7.0.3 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.906-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.906-en-mios.squashfs)
UI7 7.0.4 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.961-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.961-en-mios.squashfs)
UI7 7.0.5 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs)
^^ This release should NOT have Monoprice motion and door sensors "always tripped" issue. 7.0.6 and .7 both have issue^^
UI7 7.0.6 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1089-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1089-en-mios.squashfs)
UI7 7.0.7 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1142-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1142-en-mios.squashfs)
UI7 7.0.8 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1181-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1181-en-mios.squashfs)
UI7 7.0.9 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1248-en-mios.squashfs (http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1248-en-mios.squashfs)
UI7 7.0.10 : https://download1204.mios.com/rl/710/mt7620a_Luup_ui7-1.7.1320-en-mios.squashfs (https://download1204.mios.com/rl/710/mt7620a_Luup_ui7-1.7.1320-en-mios.squashfs)
Title: Re: UI7 Firmware Custom URL's
Post by: wezley69 on May 19, 2015, 04:47:18 pm
Adding one for the Edge

UI7 7.0.6: http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1089-en-mios.squashfs
Title: Re: UI7 Firmware Custom URL's
Post by: ykamenet on May 20, 2015, 10:58:07 am
Adding another one for Vera Edge. This is Version 7.0.5 (1.7.541/1.7.1018) Mar. 9, 2015 release that should NOT have Monoprice motion and door sensors "always tripped" issue. This is the version previous to the last two updates.

http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs
Title: Re: UI7 Firmware Custom URL's
Post by: crimsondr on May 20, 2015, 11:17:53 am
Adding another one for Vera Edge. This is Version 7.0.5 (1.7.541/1.7.1018) Mar. 9, 2015 release that should NOT have Monoprice motion and door sensors "always tripped" issue. This is the version previous to the last two updates.

http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs

What's the difference between this version and the 7.0.5 listed in OP?
Title: Re: UI7 Firmware Custom URL's
Post by: ykamenet on May 20, 2015, 11:20:20 am
Original post links are for VeraLite and Vera3 as stated. Vera Edge is using different hardware so firmware is a bit different as well.
Title: Re: UI7 Firmware Custom URL's
Post by: crimsondr on May 20, 2015, 11:57:02 am
Original post links are for VeraLite and Vera3 as stated. Vera Edge is using different hardware so firmware is a bit different as well.

Oops, my bad.  Thanks.  My reading skills are not that great today.
Title: Re: UI7 Firmware Custom URL's
Post by: samthaman on May 20, 2015, 03:05:25 pm
thank you very much that was very helpful i have been trying to find the download server for firmware but it was a bit tricky

Title: Re: UI7 Firmware Custom URL's
Post by: integlikewhoa on May 20, 2015, 04:07:52 pm
Oops, my bad.  Thanks.  My reading skills are not that great today.

Just make sure they get better before you install or you could have a brick on your hands. VERA doesn't post all these links in fear people will install the wrong one and end up with more problems then they already do.
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on May 20, 2015, 06:14:52 pm
OP updated with all links available.  If there are any notes to add, reply and I will get them added.
Title: Re: UI7 Firmware Custom URL's
Post by: BOFH on May 20, 2015, 08:18:37 pm
7.05 for Vera3/VeraLite is also the last one with correct support for Monoprice/Vision sensors.
Title: Re: UI7 Firmware Custom URL's
Post by: crimsondr on May 21, 2015, 08:30:06 am
7.05 for Vera3/VeraLite is also the last one with correct support for Monoprice/Vision sensors.

Problem with this version is that you cannot change the device options on the sensors.  They never save.  I will upgrade, make configuration changes and then downgrade again lol...
Title: Re: UI7 Firmware Custom URL's
Post by: kbhenze on May 21, 2015, 11:43:00 am
Thanks for the info. What is the best way to load these into the system  Using vera edge
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on May 21, 2015, 11:47:45 am
I can speak for the VeraLite and I think the GUI is the same.  Go to Settings -> Firmware.  Then on that page you'll see a box for "URL for Vera Custom Firmware".  Paste the link you see here into that box and press download.  Follow the steps on the next page (always create a back up when asked if you want to).  You should be good to go.
Title: Re: UI7 Firmware Custom URL's
Post by: wezley69 on May 21, 2015, 11:49:43 am
Paste the URL into the

Advanced:

URL for Vera custom firmware: 

Make sure you "DO NOT PRESERVE SETTINGS".  If you do you may brick the device.

Of course make sure you have a backup available to restore from prior to the latest firmware update.
Title: Re: UI7 Firmware Custom URL's
Post by: ykamenet on May 21, 2015, 12:19:02 pm
Paste the URL into the

Advanced:

URL for Vera custom firmware: 

Make sure you "DO NOT PRESERVE SETTINGS".  If you do you may brick the device.

Of course make sure you have a backup available to restore from prior to the latest firmware update.
Really? I have always preserved settings and never had any issues. I have done that on Vera Edge many times now and also on Vera Light that I had before. I am not sure why preserving settings would brick the device... but if there were reports of that happening, I guess that's the way to do it. I never had any issues though.
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on May 21, 2015, 12:20:30 pm
Paste the URL into the

Advanced:

URL for Vera custom firmware: 

Make sure you "DO NOT PRESERVE SETTINGS".  If you do you may brick the device.

Of course make sure you have a backup available to restore from prior to the latest firmware update.
Really? I have always preserved settings and never had any issues. I have done that on Vera Edge many times now and also on Vera Light that I had before. I am not sure why preserving settings would brick the device... but if there were reports of that happening, I guess that's the way to do it. I never had any issues though.

I was thinking the same thing.  I've only downgraded two or three times but always preserved settings.  Maybe someone more knowledgeable than me can shed some light on the issue?
Title: Re: UI7 Firmware Custom URL's
Post by: wezley69 on May 21, 2015, 02:23:56 pm
If there is doubt call Vera support.  That was the recommendation I received.
Title: Re: UI7 Firmware Custom URL's
Post by: kbhenze on May 21, 2015, 04:45:45 pm
Does the back up restore the "backed up " firmware version also or just the settings
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on May 21, 2015, 05:59:03 pm
Does the back up restore the "backed up " firmware version also or just the settings

I've heard people say that the "back up" will restore the firmware.  I called vera and they thought it would also but when I upgraded to 7.0.7, I tried to restore my back up (7.0.5) and it would not roll back the firmware.  So I had to have vera support do it from their side.  That was the phone call that inspired this thread because I was on hold for 25 minutes.  I've also read that there is an internal flag on the device that vera has to set in order to roll back. 
Title: Re: UI7 Firmware Custom URL's
Post by: wezley69 on May 21, 2015, 07:18:59 pm
I called support and tested myself restoring from backup does not restore firmware.  I tested on Edge only.
Title: Re: UI7 Firmware Custom URL's
Post by: ykamenet on May 22, 2015, 02:22:45 pm
Right, I have done this many times as well - restoring backup does not restore the firmware. I believe it contains your vera configuration (apps, devices, scenes, etc.) and z-wave network configuration only. You have to restore firmware from one of the links and either do it while preserving your existing configuration (which again I never had problems with personally) or use the restore to factory option and then restore from a backup.

I went back to 7.0.5 and everything is back to normal for me at this point.
Title: Re: UI7 Firmware Custom URL's
Post by: ykamenet on June 06, 2015, 09:01:50 am
Liinks to newly released June 4, 2015 firmware:

VeraLight / Vera 3:
UI7 1.7.599:  http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.599-en-mios.squashfs

Vera Edge:
UI7 1.7.1181: http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1181-en-mios.squashfs
Title: Re: UI7 Firmware Custom URL's
Post by: wezley69 on July 31, 2015, 06:41:18 pm
Edge:

UI7 7.0.9 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1248-en-mios.squashfs
Title: Re: UI7 Firmware Custom URL's
Post by: BOFH on August 01, 2015, 03:18:10 pm
Vera3/Lite UI7 v7.09  http://download.mios.com/709/rt3662_Luup_ui7-1.7.619-en-mios.squashfs (http://download.mios.com/709/rt3662_Luup_ui7-1.7.619-en-mios.squashfs)

Hoping CopeKyle can add these to the OP for easy reference.
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on August 04, 2015, 01:33:48 pm
Links have been updated... looks like version 7.0.10 is out now too... Looking for link
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on August 04, 2015, 01:37:22 pm
Links have been updated... looks like version 7.0.10 is out now too... Looking for link

Found them.... All links up to date
Title: Re: UI7 Firmware Custom URL's
Post by: yannicks on August 14, 2015, 07:12:36 am
Do you have a link of any recovery firmware for Vera Edge ?
This was possible with UI5 for Vera 3/Lite : http://download.mios.com/firmware/latest-vera3-recovery-firmware.bin
Title: Re: UI7 Firmware Custom URL's
Post by: copekyle on August 14, 2015, 09:56:06 am
Do you have a link of any recovery firmware for Vera Edge ?
This was possible with UI5 for Vera 3/Lite : http://download.mios.com/firmware/latest-vera3-recovery-firmware.bin

I don't have a link for that... If anyone posts one, I'll add it to the top of the links list.
Title: Re: UI7 Firmware Custom URL's
Post by: fitz2380 on August 18, 2015, 09:52:58 pm
Comment on UI7 7.05.  It does NOT have the Monoprice motion issue.  It does work.  However, it does have the Onkyo receiver issue where it causes some networking issue with your Onkyo networked receivers which prevents them from accessing your network.
Title: Re: UI7 Firmware Custom URL's
Post by: erkme73 on August 29, 2015, 03:27:27 pm
I just attempted to downgrade from 7.10 to 7.09, and while all appeared to work, on the first access, the device came up as new - no configuration.  Tons of generic devices, but no rooms, no apps, etc.

I chose to retain settings.  When I looked at the firmware, it's still showing that I'm on 1.7.1320 (7.10).  So it seems the only thing I successfully did (if that) is wipe my configuration...

Should I not have been able to apply the 7.09 and when it comes up, make no other changes?

FWIW, I was able to restore my back up from just prior (including z-wave network).  So at least I'm not back to a factory reset.

EDIT:  I hate cross-posting, and that's exactly what I did - sorry.  I'm posted my request for help under a more appropriate thread here:  http://forum.micasaverde.com/index.php/topic,33201.180.html
Title: Re: UI7 Firmware Custom URL's
Post by: sowalsup on November 02, 2015, 08:42:55 am
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.
Title: Re: UI7 Firmware Custom URL's
Post by: integlikewhoa on November 02, 2015, 10:30:12 am
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

I don't have any monoprice sensors, but I skipped the last few updates for other issues and now upgraded without any problems so far. I also haven't heard of anyone saying the beta wreaked their system and its been out for a week or so.

I would feel comfortable to tell you to run a backup and upgrade to beta to test it out. I don't see you having problems. 
Title: Re: UI7 Firmware Custom URL's
Post by: crimsondr on November 06, 2015, 09:20:42 am
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

sowalsup, did you try the upgrade?  I'm waiting for a guinea pig to try before me lol
Title: Re: UI7 Firmware Custom URL's
Post by: sowalsup on November 06, 2015, 09:25:55 am
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

sowalsup, did you try the upgrade?  I'm waiting for a guinea pig to try before me lol

Haha no, I've spent enough time being a Vera guinea pig. I am also waiting on someone else!  I'm just tired of the firmware page loading every time I log in.
Title: Re: UI7 Firmware Custom URL's
Post by: integlikewhoa on November 06, 2015, 11:19:25 am
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

sowalsup, did you try the upgrade?  I'm waiting for a guinea pig to try before me lol

Haha no, I've spent enough time being a Vera guinea pig. I am also waiting on someone else!  I'm just tired of the firmware page loading every time I log in.

http://forum.micasaverde.com/index.php/topic,11964.msg255254.html#msg255254

Post or Reply 925

I installed the latest beta firmware (isnt' all the UI7 firmware a beta?  ;D) and it seems to have solved some issues I've been having with the monoprice door/window sensors. So now I've been able to install them on my garage doors and provide their status to my wall tablets and scenes. In particular, my night-scene has been updated to make sure the garage doors are closed.

I don't have monoprice sensors but thought I would pass it on. Also for the items I do have everything has gotten better or stayed the same with the BETA. Took 10 min to install and no problems. Save a backup and if you don't like it 10 min to go back.
Title: Re: UI7 Firmware Custom URL's
Post by: 4994james on January 30, 2016, 03:35:30 pm
Hi I am trying to downgade my Vera Edge to try to fix a problem with Powermax creating unwanted notifications.  I have read that an earlier version will correct this.  I try to downgrade to 7.0.9 (1.7.1278) but when it comes back up it says it is running 1.7.1419.  Am I doing something wrong?
Title: Re: UI7 Firmware Custom URL's
Post by: KewlRobD on March 10, 2016, 08:19:19 am
Hi I am trying to downgade my Vera Edge to try to fix a problem with Powermax creating unwanted notifications.  I have read that an earlier version will correct this.  I try to downgrade to 7.0.9 (1.7.1278) but when it comes back up it says it is running 1.7.1419.  Am I doing something wrong?

Did you ever figure this out?  I am having the same issue.  Best I can tell it does do the downgrade but them immediately upgrades to the previously installed firmware. 
Title: Re: UI7 Firmware Custom URL's
Post by: snovvman on April 21, 2016, 09:23:49 am
I'll add a couple of links for Vera Plus:

The general distro 1.7.1754
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.1754-en-mios.squashfs

I received my Vera Plus with 1.7.1786
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.1786-en-mios.squashfs

When asked, customer support said that some VPs were 'accidentally' released with 1786, but it should work fine.

After my Vera Lite to Vera Plus upgrade, I had to 'Program Node Now' on my battery powered devices.  However, the notifications generated by those devices still go to Vera Lite.  I therefore cannot turn off Vera Lite.  Support is advising me to downgrade (even though they call it upgrade) to 1754.  I've read many VP owners having the same issue as me, so I doubt that 1754 will solve the problem......
Title: Re: UI7 Firmware Custom URL's
Post by: snovvman on August 14, 2016, 06:37:42 pm
Latest for VP
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.2044-en-mios.squashfs
Title: Re: UI7 Firmware Custom URL's
Post by: crimsondr on August 19, 2016, 10:28:47 am
Do the monoprice sensors work properly on the latest VeraEdge firmware?
Title: Re: UI7 Firmware Custom URL's
Post by: snovvman on September 24, 2016, 11:14:20 am
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.2138-en-mios.squashfs

Latest for VP.
Title: Re: UI7 Firmware Custom URL's
Post by: Cor on January 13, 2017, 09:49:36 am
Cool Thanks!

got also one for vera3?

Cor
Title: Re: UI7 Firmware Custom URL's
Post by: Jeff D on February 21, 2017, 06:27:47 pm
Latest update for VP:
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.2608-en-mios.squashfs
Title: Re: UI7 Firmware Custom URL's
Post by: Ionmih83 on September 04, 2017, 01:22:59 pm
Hi guys ,
You should know that i damage my vera edge unit while trying to downgrade to this version UI7 7.0.10 : https://download1204.mios.com/rl/710/mt7620a_Luup_ui7-1.7.1320-en-mios.squashfs . So do not use this firmware if you unit warranty is out of date.