The Vera Community forums have moved!

General => Remote Control => SQ Remote / Square Connect (iOS) => Topic started by: Piwtorak on October 04, 2012, 10:50:03 am

Title: Multiple sqblaster in a house
Post by: Piwtorak on October 04, 2012, 10:50:03 am
Hello !
is possible have many sqblasters in the same house ? and one unique Vera3 System ?

can I create scenes using one or many sqblasters of the house ?

My air condioning system is wall type and not possible to pass cables. I need a ceiling emitter...how can I buy this ?
is possible install sqblaster in the ceiling ? it emits signals in all directions ??

thanks...


Title: Re: Multiple sqblaster in a house
Post by: strangely on October 04, 2012, 01:06:40 pm

is possible have many sqblasters in the same house ? and one unique Vera3 System ?
Yep

Quote
can I create scenes using one or many sqblasters of the house ?
Either :)
Quote
My air condioning system is wall type and not possible to pass cables. I need a ceiling emitter...how can I buy this ?
is possible install sqblaster in the ceiling ? it emits signals in all directions ??

So long as you can get power to it then yes. (it needs 5V via a USB cable or USB wall wart) IIRC the SQblaster+ has recessed/sliding screw mounts, so you could hang one on the roof. Its also very powerful, so it should be able work in all directions.
Title: Re: Multiple sqblaster in a house
Post by: Piwtorak on October 04, 2012, 05:02:23 pm
thanks strangely by the informations....

I'm happy now because I bought a sqblaster ! :)

now, I'm waiting for that to make tests...

Title: Re: Multiple sqblaster in a house
Post by: Piwtorak on August 12, 2013, 03:27:19 pm
Hello Strangely,

I do not want open another topic.

can you solve a doubt for me ?

I want to create a scene in vera3 to turn on my tv but putting a luup code in the scene to realize this.

in another scene I would like to put a luup code to run a macro created in sqblaster.

is it possible ?

thanks in advance !
Title: Re: Multiple sqblaster in a house
Post by: strangely on August 12, 2013, 07:37:48 pm
Hello Strangely,

I do not want open another topic.

can you solve a doubt for me ?

I want to create a scene in vera3 to turn on my tv but putting a luup code in the scene to realize this.

in another scene I would like to put a luup code to run a macro created in sqblaster.

is it possible ?

thanks in advance !

You don't really need any luup code to do this, and it can should all be possible from the advanced tab of the scene. I do both your scenarios for of my stuff.
Title: Re: Multiple sqblaster in a house
Post by: Piwtorak on August 16, 2013, 08:28:35 am
Hi Strangely,

I searching in the advanced tab but I find the devices but not the macros created and recorded in sqblaster...

some luup code to run this macros ?

in my redeye units I put this command:

luup.inet.wget("http://192.168.0.13:8080/redeye/rooms/0/devices/150/commands/send?commandId=399")

this line in luup tab does the redeye send a signal to turn off a device.

thanks for help.