Vera - Smarter Home Control Forum

General => Pool Control => Topic started by: zamazing on April 08, 2014, 09:20:16 pm

Title: Hayward OmniLogic IP-based Pool Controller
Post by: zamazing on April 08, 2014, 09:20:16 pm
I've been working with my pool contractor and Hayward to get a hold of one of Hayward's recently introduced IP-based pool controllers called the OmniLogic.  I'm expecting a unit in the next couple of weeks.  From what I can tell so far, it's built from the ground up as an IP controller so it has a lot of potential.

I've also been promised a copy of the API and I'd like to see if a Vera plug-in can be developed.  Is anyone interested in assisting in the development of the plug-in?  A non-disclosure agreement (NDA) may be required...



Sent from my iPad using Tapatalk
Title: Re: Hayward OmniLogic IP-based Pool Controller
Post by: garrettwp on April 08, 2014, 10:48:06 pm
Most if not all plug-ins developed by the community provided a personal benefit for them. Unless someone here with the skills has a similar interest, you may find that you'll have to roll your sleeves up and tackle this yourself.

- Garrett

Title: Re: Hayward OmniLogic IP-based Pool Controller
Post by: matchews on May 25, 2017, 12:32:29 pm
I know this thread is ancient, but I'm about to install an OmniLogic on my pool.  Has anyone obtained the Hayward SDK or started any development?  I plan to dig into this, but wanted to see if anyone started on it first.

Thanks,
Matt
Title: Re: Hayward OmniLogic IP-based Pool Controller
Post by: zamazing on May 25, 2017, 06:42:25 pm
Was able to get a hold of the protocol, but decided not to pursue a vera plug-in.  Instead, developed an Alexa skill to control the pool. 
Title: Re: Hayward OmniLogic IP-based Pool Controller
Post by: matchews on May 26, 2017, 11:56:48 pm
Nice!  Would you mind sharing the API?

Thx
Matt
Title: Re: Hayward OmniLogic IP-based Pool Controller
Post by: mark0613 on June 26, 2017, 10:50:40 pm
I am interested as well. I have an OmniLogic, Vera Plus and Alexia -
Title: Re: Hayward OmniLogic IP-based Pool Controller
Post by: Tlex on November 09, 2018, 08:39:55 am
Have a look here:
http://forum.micasaverde.com/index.php?board=39.0 (http://forum.micasaverde.com/index.php?board=39.0)

I've automate my Hayward pool pump with Vera using a Sonoff module... Easy and fast to setup... pretty happy with that !
I'm now working on doing the same without the Sonoff using a TTL to Wifi (Geekcreit DT-06) and talk with the drive controller directly so the module will be hidden within the pump itself.