Vera - Smarter Home Control Forum

General => Power Management => Topic started by: atokle on May 01, 2017, 07:19:18 am

Title: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: atokle on May 01, 2017, 07:19:18 am
On my VeraPlus I use the latest firmware version1.7.2608.

It was successfully added to the network, and in my GUI I see one main control and 2 child controls.
When using GUI to switch them on and off, all of them give "SUCCESS! Transmit was OK".

But what happends when I use them is:
Main control swiitch on/off lamp 1
Child control 1 don't switch anything
Child control 2 don't switch anything

The physical switches works as intended.

Main control show power consumption, but only for lamp 1

Title: Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: tash on June 14, 2017, 02:37:16 am
Hi there,
Did you manage to resolve this issue?
I have the same.
After including the fibaro fgs-223 I have a main switch working and two Appliance Modules not working (not switching but showing sent success)
Regards,
tash
Title: Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: Cor on June 14, 2017, 07:36:54 am
Have you done some research on the forum allready ?
http://forum.micasaverde.com/index.php/topic,38961.0/topicseen.html (http://forum.micasaverde.com/index.php/topic,38961.0/topicseen.html)


Cor
Title: Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: bavariatech on January 09, 2018, 11:32:11 am
with verasecure running 7.0.24 it should work, i've tested it with 7.0.25b sucessfully
Title: Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: Webeye on January 14, 2018, 06:55:33 am
Hi,

I'm making a review of the 223 but i can't get the S2 to work like it should.

Is this problem still not fixed? I'm running the latest firmware.

Thanks!
Title: Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: kwieto on January 18, 2018, 06:34:44 am
It is solved, both channels working and reporting power separately.
Title: [RESOLVED] Fibaro FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: Sorin on January 18, 2018, 08:00:34 am
Indeed, later official firmware, solved all the incompatibility issues with this device.
Title: Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
Post by: Sorin on April 11, 2018, 05:29:14 am
Hey Cript,

Please submit a ticket to our Customer Care team, to clarify and assist you with any possible issues.
Contact details are in my signature.