The Vera Community forums have moved!

General => Video Camera Control => Topic started by: kwieto on March 12, 2018, 05:34:03 pm

Title: Netatmo Presence and Welcome - configuration [instruction]
Post by: kwieto on March 12, 2018, 05:34:03 pm
Did anyone try (successfully) configure Netatmo Presence camera with Vera?
I've found instruction how to add it to the Fibaro system and managed to get view from camera using link in web browser.
But I can't make it appear in Vera.

I used manual configuration for "other IP camera", but after choosing camera IP and the link which worked in web browser, nothing happens, the message is that camera is not found.

Any ideas how to make it work?
Title: Re: Netatmo Presence and Welcome - configuration [instruction]
Post by: kwieto on March 26, 2018, 05:56:08 pm
OK, problem solved.
If anyone interested, here is recipe:

Update: you can add camera remotely, without being on the local network. Following procedure works no matter if you are local or remote


You will not have live preview, but still images refreshing on 30s-60s rate. Or you can refresh it manually.
Maybe there is a way to get live preview by chaging the part live/snapshot_720.jpg for another (maybe "mjpg"?)
Title: Re: Netatmo Presence and Welcome - configuration [instruction]
Post by: lisam77 on July 30, 2018, 12:29:54 am
 :D :D :D Thank you so much for these detailed instructions.  I would never have been able to connect my Presence to my Vera without this!  I thought it would be an existing app within Vera (like the weather station).

The only bit I had a little bit of trouble with was between steps 2 and 3, where I had to click on 'Reference' on the left to open the list with 'Security'.  Otherwise, perfect - couldn't believe it worked first time!  Now I have to figure out what I can do.  My plan is to install a z-wave switch behind the wall and use the Presence as a sensor to turn the outside lights on for a set period of time when a car is detected at night.  May be a little ambitious as I don't see the same functionality within Vera as the Netatmo security app (with different detection types) but maybe in time that will upgrade within Vera.
Title: Re: Netatmo Presence and Welcome - configuration [instruction]
Post by: jayce44 on September 30, 2018, 01:12:15 pm
Bonsoir

Il ne faut pas mettre le HTTP:// en copiant le lien de la camera
ex: 192.168.***.***/60cc3015065c4d49a16aa51cafe5b351/live/snapshot_720.jpg