The Vera Community forums have moved!

General => Blinds & Window Covering Control => Topic started by: Domoworking on October 15, 2018, 05:07:01 pm

Title: Awning, fgr 222, up/down buttons
Post by: Domoworking on October 15, 2018, 05:07:01 pm
I couldn't find anithing in The forum.... I set up a Fibaro FGR222 to control my awning.
With roller shutter close means down and open means up.
But with awning open means down and close means up.

I was wondering If there is a was to chance or inverte The two buttons (up and down)...
Title: Re: Awning, fgr 222, up/down buttons
Post by: Sender on October 15, 2018, 05:31:33 pm
There is not by my knowledge. The best way is to turn around physically.
Title: Re: Awning, fgr 222, up/down buttons
Post by: Cristina on October 16, 2018, 01:59:50 am
Hello Domoworking,

For testing purpose you can try to add the variable called ReverseOnOff. What you need to do is to connect to the Vera's web interface, then go to Devices tab, click > button in front of the device, go to Advanced and click the option New Service.

Then fill out the following information:

1. New service: urn:micasaverde-com:serviceId:HaDevice1

2. New variable: ReverseOnOff

3. New value : 1

If you still have issues with it, you can send us an email to support@getvera.com.

Thank you and Have a nice day,
Title: Re: Awning, fgr 222, up/down buttons
Post by: Domoworking on October 16, 2018, 03:55:48 pm
Thx Cristina, it works almost like a charm.
Where do I see this setting once configured? And eventually how to I get back? Can I delete it or shall I set it to 0?

I still have a problem with the slider: if I set it to 0%, the awning closes, but once the motor stops Vera show 100%. Any clue?

Regards
Title: Re: Awning, fgr 222, up/down buttons
Post by: Domoworking on October 17, 2018, 10:41:57 am
After configuring the ReverseOnOff i get something similar to http://forum.micasaverde.com/index.php/topic,50125.0.html
Once set to 0% the slider show 100%