The Vera Community forums have moved!

General => Upgrading => Topic started by: tedp on January 18, 2018, 11:52:47 am

Title: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: tedp on January 18, 2018, 11:52:47 am
Title: Re: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: Sammy2 on January 18, 2018, 12:16:56 pm
Are you using PUTTY to get into your Vera to look at these things?

I'm wondering if this is why one of my door sensors is now showing open when the door is closed but all other sensors are reporting correctly but I've been rolled back to 7.3015 by Customer Support as I had quite a few issues yesterday. I may roll forward but only if CS recommends and will be available to fix issues right away.
Title: Re: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: tedp on January 18, 2018, 12:45:19 pm
Yes.. putty to get a shell, and winScp to move files.

Sent from my Nexus 5X using Tapatalk

Title: Re: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: kartcon on January 18, 2018, 04:13:36 pm
TedP,

Take a look at this post. Similar problems with Door Sensors after 1.7.3502

http://forum.micasaverde.com/index.php?topic=54290.msg340901#msg340901 (http://forum.micasaverde.com/index.php?topic=54290.msg340901#msg340901)

Are there specific instruction on how to downgrade to a prior firmware version? In my case 1.7.3233.
Title: Re: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: Sammy2 on January 18, 2018, 04:29:18 pm
TedP,

Take a look at this post. Similar problems with Door Sensors after 1.7.3502

http://forum.micasaverde.com/index.php?topic=54290.msg340901#msg340901 (http://forum.micasaverde.com/index.php?topic=54290.msg340901#msg340901)

Are there specific instruction on how to downgrade to a prior firmware version? In my case 1.7.3233.

Support can send you a link via email or do it for you.
Title: Re: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: xeinth on January 18, 2018, 08:00:02 pm
I ran into this before I realized it was because I was running out of space during the upgrade.  Do you know how much space you have left?

If you are running ALTUI take a look at the df -h command or ssh in and take a look to see how the overlay looks.

bk
Title: Re: 7.25 Woes (missing file) -- Ended up Downgrading
Post by: tedp on January 18, 2018, 11:11:26 pm
I ran into this before I realized it was because I was running out of space during the upgrade.  Do you know how much space you have left?

If you are running ALTUI take a look at the df -h command or ssh in and take a look to see how the overlay looks.

bk

See my previous post http://forum.micasaverde.com/index.php/topic,52304 (http://forum.micasaverde.com/index.php/topic,52304)

I was definitely short on space. Per the linked thread, there was talk that the plugins might automatically download themselves if I erased them (to free up space). They did not -- so I restored them by recovering a backup.

Of note is that vera uses the "df" command to establish how much free space there is. "df" will not necessarily show the free space as you delete files since some file handles might still be open. I found it out the hard way, as I was slowly deleting files in the /etc/cmh-ludl directory, and not seeing changes in "df" output! However, once I rebooted, the changes came up.