We have moved at community.getvera.com

Author Topic: FGR 222 - Cut power engine in abutment  (Read 213 times)

Offline JPierre44

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
FGR 222 - Cut power engine in abutment
« on: March 23, 2019, 07:05:49 pm »
Good morning to you,
First, sorry for my English, I?m French

I have a roller shutter that stays in the motor position powered while it is in the high position. I saw in the
doc Fibaro that it is possible to define values to cut the current:
- Parameter 18: in W
- Parameter 22: in S

Can you tell me how to find these fields in a Ul7 plus vera?

Thanks

Offline Cristina

  • Support
  • Jr. Member
  • *****
  • Posts: 68
  • Karma: +7/-0
Re: FGR 222 - Cut power engine in abutment
« Reply #1 on: March 25, 2019, 05:04:06 am »
Hello,

In order to setup those parameters, you need to connect to the Vera's web interface, then go to Devices tab and click on > button in front of your roller shutter. Then go to Device Options and you should see an option called Configuration settings.

From there please click on Add configuration settings and you'll see that you'll have the option to setup what you want. For variable value, you'll put the parameter that you want ( for example 18 ) then the date size and the desired value.

When you are finished with this, you need to save the changes.

Thank you and Have a nice day