Author Topic: UI6 1.6.641 public beta for Vera 3/3lite (not official MCV announce)  (Read 38944 times)

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Found today under the link http://cp.mios.com/firmware  a new design and a page saying that my vera 3 lite got upgraded, which it did not btw. I could make a new username and then i got this page : https://home.getvera.com/dashboard/display
So does this mean the new beta is available for test ? the normal firmware upgrade page in UI5 isn't showing anything and the firmware upgrade page goes to getvera.com not able to connect to unit.
http://cpui5.mios.com/firmware however goes to the normal firmware upgrade page.

edit:
specially for our beloved member garrettwp i changed the title to state that this is not an official MCV announcement. i also took away the vera 2 coz it is not clear if this is also supported or not.
mind that you will however get MCV support for this new firmware as they are nice guys and willing to help you out when in trouble. (bear in mind that sometimes the're too busy with bugfixing and other things, so it could take a while sometimes)
« Last Edit: January 25, 2014, 02:21:36 pm by Da_JoJo »
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline Lonestar10

  • Full Member
  • ***
  • Posts: 214
  • Karma: +4/-1
Re: UI6 1.6.633
« Reply #1 on: January 20, 2014, 12:36:19 pm »
I was told at CES that when UI7 is released, we would have a new URL to access Vera.  You may have stumbled into the early stages of the transition.

IU5 Vera 3 - VeraLite - Trane Thermostats x3 - Kwikset - Schlage - Nest - GE & Leviton Switches

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: UI6 1.6.633
« Reply #2 on: January 20, 2014, 12:38:53 pm »
mm i would think this is UI6 new remote interface.
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline Sender

  • Hero Member
  • *****
  • Posts: 739
  • Karma: +531/-434
  • Sr. manager of my Vera
Re: UI6 1.6.633
« Reply #3 on: January 20, 2014, 12:53:08 pm »
Yes in anther post this was mentioned as the ui6 interface
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline Sender

  • Hero Member
  • *****
  • Posts: 739
  • Karma: +531/-434
  • Sr. manager of my Vera
Re: UI6 1.6.633
« Reply #4 on: January 20, 2014, 04:13:47 pm »
Something is upcoming...

when going to  http://cp.mios.com/firmware sends you to a page saying "your vera is upgrading". Then it forwards you to home.vera.com and let's you register...

you will receive an email validation code shortly after.... but there is nothing to be displayed then...

(this means you will need to make a new account... because the password policy is very strict.
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline flyveleder

  • Full Member
  • ***
  • Posts: 189
  • Karma: +5/-14
Re: UI6 1.6.633
« Reply #5 on: January 20, 2014, 04:20:12 pm »
OMG ... UI6 1.6.633 ... the EVIL version  ;D

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: UI6 1.6.633
« Reply #6 on: January 20, 2014, 10:31:03 pm »
OMG ... UI6 1.6.633 ... the EVIL version  ;D
lol , now that u mention it ;D
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline Cor

  • Hero Member
  • *****
  • Posts: 1051
  • Karma: +4/-4
Re: UI6 1.6.633
« Reply #7 on: January 21, 2014, 08:19:49 am »
Hmm,   just want to make sure.

When version 1.6.xxx  is deployed , it will not automatically update my veras ? I will have to allow the devices to update?

I just don't want to be the guinipig , and find out that for example my heating system has shutdown ( with -20 degrees celcius   >:( ) since the the new version won't handle some PLEG , LUUP or plugins.

If the update comes automatically , is there somewhere a setting I can override this and stay with the "old" firmware?

For me, I don't see any reason to upgrade ( for the moment) untill I know for sure all will be working fine.

Thanks,
Cor

Offline Brientim

  • Beta Testers
  • Sr. Hero Member
  • *****
  • Posts: 2491
  • Karma: +77/-7
Re: UI6 1.6.633
« Reply #8 on: January 21, 2014, 09:02:47 am »

Hmm,   just want to make sure.

When version 1.6.xxx  is deployed , it will not automatically update my veras ? I will have to allow the devices to update?

I just don't want to be the guinipig , and find out that for example my heating system has shutdown ( with -20 degrees celcius   >:( ) since the the new version won't handle some PLEG , LUUP or plugins.

If the update comes automatically , is there somewhere a setting I can override this and stay with the "old" firmware?

For me, I don't see any reason to upgrade ( for the moment) untill I know for sure all will be working fine.

Thanks,
Cor
Cor,

It will not automatically deploy a firmware update. You will need to deploy it at a time suitable to you.


Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: UI6 1.6.633
« Reply #9 on: January 21, 2014, 12:13:25 pm »
from what i recall it will tell you upon login to the vera that there is a firmware upgrade and if you wish to apply it. it should be compatible with all UI5 plugins except the camera ones.

did anyone find out yet where to put the mail confirmation code ? it seems it should go somewhere in the UI6 interface i presume ?
« Last Edit: January 21, 2014, 01:15:46 pm by Da_JoJo »
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline alienz

  • Full Member
  • ***
  • Posts: 130
  • Karma: +4/-2
Re: UI6 1.6.633
« Reply #10 on: January 21, 2014, 02:11:16 pm »
i logged into the link with my normal cp password and then it redirected me back to my vera. (UI 5, veralite)

Offline Brientim

  • Beta Testers
  • Sr. Hero Member
  • *****
  • Posts: 2491
  • Karma: +77/-7
Re: UI6 1.6.633
« Reply #11 on: January 21, 2014, 03:22:06 pm »

from what i recall it will tell you upon login to the vera that there is a firmware upgrade and if you wish to apply it. it should be compatible with all UI5 plugins except the camera ones.

did anyone find out yet where to put the mail confirmation code ? it seems it should go somewhere in the UI6 interface i presume ?
All will be known once they release the firmware update... The "mail confirmation code" is the password for the new security access.

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: UI6 1.6.633
« Reply #12 on: January 22, 2014, 07:00:44 am »
i logged into the link with my normal cp password and then it redirected me back to my vera. (UI 5, veralite)
u can't, page is saying: Your unit is upgrading to the latest version. Please create an account.
cpui5.mios.com is directing to the UI5 vera.
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: UI6 1.6.633
« Reply #13 on: January 22, 2014, 07:04:39 am »
All will be known once they release the firmware update... The "mail confirmation code" is the password for the new security access.
yes i know. but where to put it :-)  i didnt install ui6 yet, but some here did.
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline j.hoekstra

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +5/-0
Re: UI6 1.6.633
« Reply #14 on: January 22, 2014, 02:24:16 pm »
Hmmm, after registering I got this after searching the vera again:

http://tweakers.net/ext/f/9dGXSq4qoiFbSp9SCyMijau9/full.png

Should I?
« Last Edit: January 22, 2014, 02:27:29 pm by j.hoekstra »