Author Topic: UI7 Firmware Custom URL's  (Read 22394 times)

Offline copekyle

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-5
UI7 Firmware Custom URL's
« on: May 19, 2015, 11:57:27 am »
So with UI7 being so hit and miss, I think it would be good to have a list of the custom urls for each firmware version.  I'm sick of calling vera to downgrade.  These all should be compatible with VeraLite and Vera3.  If you see anything wrong, please let me know.  I'll do my best to consolidate all links that are posted in this thread into the first post.  Thanks all that contribute links.

VeraLite and Vera 3 links:
UI7 7.0.RC: http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.318-en-mios.squashfs
UI7 7.0.1  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.388-en-mios.squashfs
UI7 7.0.2  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.439-en-mios.squashfs
UI7 7.0.3  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.481-en-mios.squashfs
UI7 7.0.4  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.513-en-mios.squashfs
UI7 7.0.5  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.541-en-mios.squashfs
^^ This release should NOT have Monoprice motion and door sensors "always tripped" issue. 7.0.6 and .7 both have issue^^
UI7 7.0.6  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.569-en-mios.squashfs
UI7 7.0.7  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.583-en-mios.squashfs
UI7 7.0.8  : http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui7-1.7.599-en-mios.squashfs
UI7 7.0.9  : http://download.mios.com/709/rt3662_Luup_ui7-1.7.619-en-mios.squashfs
UI7 7.0.10  : http://download.mios.com/710/rt3662_Luup_ui7-1.7.649-en-mios.squashfs

Vera Edge Links
UI7 7.0.3 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.906-en-mios.squashfs
UI7 7.0.4 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.961-en-mios.squashfs
UI7 7.0.5 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs
^^ This release should NOT have Monoprice motion and door sensors "always tripped" issue. 7.0.6 and .7 both have issue^^
UI7 7.0.6 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1089-en-mios.squashfs
UI7 7.0.7 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1142-en-mios.squashfs
UI7 7.0.8 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1181-en-mios.squashfs
UI7 7.0.9 : http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1248-en-mios.squashfs
UI7 7.0.10 : https://download1204.mios.com/rl/710/mt7620a_Luup_ui7-1.7.1320-en-mios.squashfs
« Last Edit: August 04, 2015, 01:45:48 pm by copekyle »

Offline wezley69

  • Sr. Member
  • ****
  • Posts: 283
  • Karma: +6/-6
Re: UI7 Firmware Custom URL's
« Reply #1 on: May 19, 2015, 04:47:18 pm »

Offline ykamenet

  • Full Member
  • ***
  • Posts: 100
  • Karma: +4/-3
Re: UI7 Firmware Custom URL's
« Reply #2 on: May 20, 2015, 10:58:07 am »
Adding another one for Vera Edge. This is Version 7.0.5 (1.7.541/1.7.1018) Mar. 9, 2015 release that should NOT have Monoprice motion and door sensors "always tripped" issue. This is the version previous to the last two updates.

http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs

Offline crimsondr

  • Full Member
  • ***
  • Posts: 148
  • Karma: +1/-1
Re: UI7 Firmware Custom URL's
« Reply #3 on: May 20, 2015, 11:17:53 am »
Adding another one for Vera Edge. This is Version 7.0.5 (1.7.541/1.7.1018) Mar. 9, 2015 release that should NOT have Monoprice motion and door sensors "always tripped" issue. This is the version previous to the last two updates.

http://builder1204.mios.com/mt7620a_betafirmware/mt7620a_Luup_ui7-1.7.1018-en-mios.squashfs

What's the difference between this version and the 7.0.5 listed in OP?

Offline ykamenet

  • Full Member
  • ***
  • Posts: 100
  • Karma: +4/-3
Re: UI7 Firmware Custom URL's
« Reply #4 on: May 20, 2015, 11:20:20 am »
Original post links are for VeraLite and Vera3 as stated. Vera Edge is using different hardware so firmware is a bit different as well.

Offline crimsondr

  • Full Member
  • ***
  • Posts: 148
  • Karma: +1/-1
Re: UI7 Firmware Custom URL's
« Reply #5 on: May 20, 2015, 11:57:02 am »
Original post links are for VeraLite and Vera3 as stated. Vera Edge is using different hardware so firmware is a bit different as well.

Oops, my bad.  Thanks.  My reading skills are not that great today.

Offline samthaman

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: UI7 Firmware Custom URL's
« Reply #6 on: May 20, 2015, 03:05:25 pm »
thank you very much that was very helpful i have been trying to find the download server for firmware but it was a bit tricky


Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5526
  • Karma: +149/-347
Re: UI7 Firmware Custom URL's
« Reply #7 on: May 20, 2015, 04:07:52 pm »
Oops, my bad.  Thanks.  My reading skills are not that great today.

Just make sure they get better before you install or you could have a brick on your hands. VERA doesn't post all these links in fear people will install the wrong one and end up with more problems then they already do.

Offline copekyle

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-5
Re: UI7 Firmware Custom URL's
« Reply #8 on: May 20, 2015, 06:14:52 pm »
OP updated with all links available.  If there are any notes to add, reply and I will get them added.

Offline BOFH

  • Sr. Hero Member
  • ******
  • Posts: 2371
  • Karma: +110/-137
Re: UI7 Firmware Custom URL's
« Reply #9 on: May 20, 2015, 08:18:37 pm »
7.05 for Vera3/VeraLite is also the last one with correct support for Monoprice/Vision sensors.
Vera3 UI5 UI7 Edge Plus
Trane TZEMT400AB32 | Schlage BE369 FE599 | GE 45601 45602 45603 45604 45606 45609 45631 | Intermatic HA01C HA03C HA05C HA07C CA600 CA3000 | Aeon DSC06106 | Telguard GDC1 | Foscam FI8910W FI8905W FI9821W | D-Link 930L | Wanscam JW0011 | ZModo ZPIBH13W

Offline crimsondr

  • Full Member
  • ***
  • Posts: 148
  • Karma: +1/-1
Re: UI7 Firmware Custom URL's
« Reply #10 on: May 21, 2015, 08:30:06 am »
7.05 for Vera3/VeraLite is also the last one with correct support for Monoprice/Vision sensors.

Problem with this version is that you cannot change the device options on the sensors.  They never save.  I will upgrade, make configuration changes and then downgrade again lol...

Offline kbhenze

  • Sr. Newbie
  • *
  • Posts: 23
  • Karma: +0/-0
Re: UI7 Firmware Custom URL's
« Reply #11 on: May 21, 2015, 11:43:00 am »
Thanks for the info. What is the best way to load these into the system  Using vera edge

Offline copekyle

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-5
Re: UI7 Firmware Custom URL's
« Reply #12 on: May 21, 2015, 11:47:45 am »
I can speak for the VeraLite and I think the GUI is the same.  Go to Settings -> Firmware.  Then on that page you'll see a box for "URL for Vera Custom Firmware".  Paste the link you see here into that box and press download.  Follow the steps on the next page (always create a back up when asked if you want to).  You should be good to go.

Offline wezley69

  • Sr. Member
  • ****
  • Posts: 283
  • Karma: +6/-6
Re: UI7 Firmware Custom URL's
« Reply #13 on: May 21, 2015, 11:49:43 am »
Paste the URL into the

Advanced:

URL for Vera custom firmware: 

Make sure you "DO NOT PRESERVE SETTINGS".  If you do you may brick the device.

Of course make sure you have a backup available to restore from prior to the latest firmware update.

Offline ykamenet

  • Full Member
  • ***
  • Posts: 100
  • Karma: +4/-3
Re: UI7 Firmware Custom URL's
« Reply #14 on: May 21, 2015, 12:19:02 pm »
Paste the URL into the

Advanced:

URL for Vera custom firmware: 

Make sure you "DO NOT PRESERVE SETTINGS".  If you do you may brick the device.

Of course make sure you have a backup available to restore from prior to the latest firmware update.
Really? I have always preserved settings and never had any issues. I have done that on Vera Edge many times now and also on Vera Light that I had before. I am not sure why preserving settings would brick the device... but if there were reports of that happening, I guess that's the way to do it. I never had any issues though.