"Play nice" devices list

[Jesfer]

UI7 firmware has only one head build and will be exactly the same on all Vera hardware. So if there's an incompatibility with one unit, it will be for all.
Latest available official release is the norm, and Known to work is based on this firmware.

Does that mean that if I look at http://getvera.com/compatibility/ and see a device listed as compatible with Vera Edge and Vera Plus but not Vera Secure it is actually compatible with Vera Secure?

Like this one: http://getvera.com/portfolio-posts/wintop-doorwindow-sensor/

[Sorin]

That is a Z-Wave device and will work with All the controllers.
VeraSecure is not listed just yet as it was not released when that device was posted.

Thank you for the heads up. I will give the team an heads up to update it.

[kwieto]

Some No-Name (Heiman?) CO sensor, looks exactly like Zipato CO sensor - works well, but pairing as generic. device type and xml have to be changed to SmokeSensor1, and device json to CO_Sensor1.

Zipato RGBW2 bulb, works well both with RGB plugin and with native support, also need a change in settings (device type, xml and json) to DimmableRGBLight2

Qubino ON/OFF Thermostat - works, but to turn it on you have to use lua code as it has only OFF and Automatic available via the interface. Choosing automatic option switches it OFF few moments later. To make it work, you have to set it to "Heat", which you can do via lua in scene. What is odd, if you want to program its behaviour via MyModes panel, you have "Heat" option available to choose and it act accordingly.

Mob.iq switches - didn't test it by myself, but I have first-hand report that they work. Don't know about remote controls (which are interesting, by the way)

[robie]

in addition to the first post, i am also happy with the following devices i use:
I.Alarm
- GoControl ZWave Siren & Strobe (part of GoControl Premium Home Security Suite)
- Dome Home Security Siren and Chime
II.Energy
Aeon Labs ZW095-A - Z-Wave Plus - Home Energy Meter
III.Outlets
- Aeon Labs Aeotec Smart Switch 6, Gen5
- Aeotec Smart Dimmer 6
IV.Door Locks
- Yale Real Living Keyless Push Button Deadbolt with Z-Wave (YRD210)
V. Sensors
- GoControl Motion sensor WAPIRZ-1 (works as motion and temperature sensor)
- Aeon labs Aeotec water sensor (DSB45-ZWUS)
VI. Cameras
Hikvision DS-7208HQHI-SH
Hikvision DS-2CD2F22FWD-IWS
VII. Remote Control
Aeon labs DSA03202-V1 Minimote
Logitech Harmony Hub & remote
VIII. Lights
Philips HUe

other devices already listed on first post, so i excluded them already.  Roomba works but via amazon alexa  but amazon alexa not fully supported (device status announcements)

[blairRosen]

I can't seem to get the Zooz ZSE30 to play nice.  Once paired as a generic Z-Wave device  the Leak sensor creates two devices, one of which is categorized as a"motion sensor" and the other as Generic I/O.  It seems to me that since this device has only a single function this can't be right.  There is no specific choice under the add device "sensors"  category for the Zooz ZSE30, so could you please  explain the  install selections you used to get this installed and playing nice with UI7.

[rafale77]

I have about half a dozen of these and have encountered the same problem and can't completely remember how I got it fixed. If I may suggest, try including it as a dome leak sensor from the sensor menu. These devices are identical. This is definitely some complications in the device configuration.