Author Topic: Proper Parameters for: Aeon Labs Smart Switch 6 - Gen5  (Read 282 times)

Online dpons039

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Proper Parameters for: Aeon Labs Smart Switch 6 - Gen5
« on: April 07, 2017, 04:56:47 am »
Hello guys,

I'm going to share my Parameters for this Device so that you have it reporting the Usage in realtime based on The Watt or Percentage of usage.

Parameter 80 -> 0 (1 byte dec) // Upon testing this seems to be the most eficient option.
Parameter 81 -> 1 (1 byte dec) // This is the Light control. By setting 1, It will only turn on/off only when you press the button

Parameter 90 -> 1 (1 byte dec) // This forces the device to send the report based on the parameters 91 and 92
Parameter 91 -> 2 (2 byte dec) // Minium Watt change in order to send the report (Default is 25W, in case of a PC or so.. you need it to be a lot lower, I set it to 2)
Parameter 92 -> 5 (1 byte dec) // Minimum % usage in order to send the report (Default is 5%)

I really hope it helps and Wish MCV would had set the default paramenters of 80 to 0 and 90 to 1 at the auto-setup

Regards,
Dave
« Last Edit: April 07, 2017, 05:02:13 am by dpons039 »