How to add AirLink101 SkyIPCam747/747W (AICN747 and AICN747W) to Vera.
Ok after several hours of fiddling I got my AirLink101 SkyIPCam747 and 747W cameras to work. First I wanted to update the firmware. To do this I used TRENDnet TV-IP410 and TV-IP410W firmware to upgrade each camera.
Download firmware from these two links:https://www.trendnet.com/support/supportdetail.asp?prod=155_TV-IP410https://www.trendnet.com/support/supportdetail.asp?prod=160_TV-IP410W
Next edit each firmware file with hex editor. I used ?Hex Fiend? on my mac. After opening file(s) search for 410 and override with the following?
Change TV-IP410 to AICN747A
Change TV-IP410W to AICN747W
Now you can update firmware within the web page on each camera tools. Now you should have TRENDnet cameras.
Setup cameras following TRENDnet manual. Once setup you can add to Vera using the following instructions. This was done on my VeraLite with firmware version 1.7.919.
Add camera(s) to Vera. I will show my simple example, but be sure to update camera passwords from default.
1. Click ?Cameras?
2. Click ?Add Camera?
3. Click ?IP Camera?
4. Click ?Next?
5. Click ?Next?
6. Click ?Next?
7. Click ?Manually install the camera (advanced)?
8. Select ?If the camera is not in the list ?click here? for manual configuration.?
9. Select camera type ?Other IP camera?
10. Type Camera URL ?http://192.168.0.241/cgi/mjpg/mjpg.cgi?
11. Type Camera Username ?admin?
12. Type Camera Password ?admin?
13. Click ?Test?
You should now see live video from the camera.
14. Type in Camera Name
15. Select Room
16. Click ?Next?
Hope this was helpful