We have moved at community.getvera.com

Author Topic: Problem with UI5 and IP Cameras  (Read 18726 times)

Offline HouseBot

  • Full Member
  • ***
  • Posts: 210
  • Karma: +1/-1
Re: Problem with UI5 and IP Cameras
« Reply #30 on: April 20, 2012, 01:46:13 pm »
With the tips I managed to remove 1/4 cameras. But there is still 2 cameras left that gives me the "Command failedInvalid plugin". What to try next?

Offline Brientim

  • Sr. Hero Member
  • ******
  • Posts: 2497
  • Karma: +78/-7
Re: Problem with UI5 and IP Cameras
« Reply #31 on: April 20, 2012, 03:31:04 pm »
Try add a parent in the advance tab, any device is fine. Save. After Lua restarts try to delete them.

Offline HouseBot

  • Full Member
  • ***
  • Posts: 210
  • Karma: +1/-1
Re: Problem with UI5 and IP Cameras
« Reply #32 on: April 23, 2012, 06:09:20 am »
Thanks! I added them to "zwave" and after saving they are gone. No need to even delete them.
Can you elaborate a little what this parent function does since I have not used it?

Offline mcvflorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1755
  • Karma: +11/-3
Re: Problem with UI5 and IP Cameras
« Reply #33 on: April 23, 2012, 06:24:59 am »
Usually the parent device handles the action implementations of its children. Also, when the parent device is deleted, the child devices are deleted too. The reason those devices disappeared when you set their parent to be Z-Wave is that they were invalid Z-Wave devices, so they couldn't be controlled by the Z-Wave controller.

Changing the parent of a device can be dangerous and I don't recommend it, unless you know what you are doing. There were several cases in which users changed the parent of a device and created parent -> child loops: device A controls device B, device B controls device A. This causes LuaUPnP to crash at startup.

Offline blacey

  • Sr. Member
  • ****
  • Posts: 251
  • Karma: +30/-1
Re: Problem with UI5 and IP Cameras
« Reply #34 on: August 24, 2012, 01:22:16 am »
I ran the recommended lua to remove the files from the /etc/cmh-ludl directory however I still get the plugin 188 error on my Vera 3, upgraded via restore from a Vera 2.  I noticed that the plugin is also installed in the /etc/cmh-lu:

Code: [Select]

root@MiOS_30003842:/etc/cmh-lu# ls -l *DigitalSecurity* *Pana*
ls: *Pana*: No such file or directory
-rw-r--r--    1 root     root          1719 Jun 29 00:02 D_DigitalSecurityCamera1.json.lzo
-rw-r--r--    1 root     root           474 Jun 29 00:02 D_DigitalSecurityCamera1.xml.lzo
-rw-r--r--    1 root     root          2112 Jun 29 00:02 D_DigitalSecurityCamera2.json.lzo
-rw-r--r--    1 root     root           533 Jun 29 00:02 D_DigitalSecurityCamera2.xml.lzo
-rw-r--r--    1 root     root           797 Jun 29 00:02 S_DigitalSecurityCameraSettings1.xml.lzo
-rw-r--r--    1 root     root           838 Jun 29 00:02 S_DigitalSecurityCameraStillImage1.xml.lzo

Should I also remove those plugin files?

Here are the relevant log statements that show the plugin error:

Code: [Select]

09        08/23/12 22:10:09.861        JobHandler_LuaUPnP::Run device 1 ZWave room 0 type urn:schemas-micasaverde-com:device:ZWaveNetwork:1 id  parent 0/0x77ecf0 upnp: 0 <0x2b314000>
03        08/23/12 22:10:09.868        JobHandler_LuaUPnP::Run ready 35 devices installation 30003842 missing plugin version *1.5.408*  allow_evt: 1 allow_ud: 1 upnp 0 netpnp: 1 reprovision: 0 changed: 0 pMem 0xa87000 start 7753728 diff: 3284992 <0x2b314000>
01        08/23/12 22:10:10.879        JobHandler_LuaUPnP::DownloadPlugin 188 failed to convert error -4: ERROR: no version relased for this plugin <0x2bc47680>
01        08/23/12 22:10:10.880        JobHandler_LuaUPnP::DownloadFiles new plugin 188 returned 0 <0x2bc47680>
06        08/23/12 22:10:11.101        Device_Variable::m_szValue_set device: 27 service: urn:micasaverde-com:serviceId:InsteonNetwork1 variable: NetStatusID was: 5 now: 1 #hooks: 0 upnp: 0 v:(nil)/NONE duplicate:0 <0x2ba47680>
06        08/23/12 22:10:11.101        Device_Variable::m_szValue_set device: 27 service: urn:micasaverde-com:serviceId:InsteonNetwork1 variable: NetStatusText was: Configuring INSTEON PLM now: OK #hooks: 0 upnp: 0 v:(nil)/NONE duplicate:0 <0x2ba47680>
02        08/23/12 22:10:11.102        ZWaveJobHandler::SetDeviceStatus XXX2 0/0/0/0 <0x2ba47680>
01        08/23/12 22:10:11.689        JobHandler_LuaUPnP::DownloadPlugin 188 failed to convert error -4: ERROR: no version relased for this plugin <0x2bc47680>
01        08/23/12 22:10:11.689        JobHandler_LuaUPnP::DownloadFiles new plugin 188 returned 0 <0x2bc47680>
09        08/23/12 22:10:12.105        ZWaveJobHandler::FindCustomDeviceType node 10/0 has custom 2018 file D_ComboDevice1.xml class ZWaveMultiEmbedded desc _3-in-1 sensor <0x2ba47680>
09        08/23/12 22:10:12.106        ZWaveJobHandler::FindCustomDeviceType node 10/1 has custom 2019 file D_MotionSensor1.xml class  desc  <0x2ba47680>
Three Vera-3 (Home, Seasonal 1 & 2) - Firmware: 1.5.622,   Zwave: 3.20 L:1
One Vera-Edge (Dependent) - Firmware: 1.7.1707, Zwave: 4.5 L:1

Offline Brientim

  • Sr. Hero Member
  • ******
  • Posts: 2497
  • Karma: +78/-7
Re: Problem with UI5 and IP Cameras
« Reply #35 on: August 24, 2012, 03:44:38 am »
I ran the recommended lua to remove the files from the /etc/cmh-ludl directory however I still get the plugin 188 error on my Vera 3, upgraded via restore from a Vera 2.  I noticed that the plugin is also installed in the /etc/cmh-lu:

Hello blacey

Plugin 188 does not cause any issue and is benign. Do you use automator.app?

Run the command below in your browser
http://<Vera_IP>/port_3480/data_request?id=user_data&output_format=xml
From within the browser do a find and search for [ plugin="188" ] this will enable you to identify the invisible device id
Run the command below in your browser to delete the device and this will stop it requesting download
http://<Vera_IP>:3480/data_request?id=device&action=delete&device=<device_ID>

Replace the two elements below with details of your system
<Vera_IP>
<device_ID>

If you connect to your Vera using automator.app you may see this reoccurring and as previous stated, it will not cause any issues with your unit and there is no reason for concern.

Offline hmspain

  • Hero Member
  • *****
  • Posts: 528
  • Karma: +16/-8
Re: Problem with UI5 and IP Cameras
« Reply #36 on: December 20, 2014, 02:16:49 pm »
I ran the recommended lua to remove the files from the /etc/cmh-ludl directory however I still get the plugin 188 error on my Vera 3, upgraded via restore from a Vera 2.  I noticed that the plugin is also installed in the /etc/cmh-lu:

Hello blacey

Plugin 188 does not cause any issue and is benign. Do you use automator.app?

Run the command below in your browser
http://<Vera_IP>/port_3480/data_request?id=user_data&output_format=xml
From within the browser do a find and search for [ plugin="188" ] this will enable you to identify the invisible device id
Run the command below in your browser to delete the device and this will stop it requesting download
http://<Vera_IP>:3480/data_request?id=device&action=delete&device=<device_ID>

Replace the two elements below with details of your system
<Vera_IP>
<device_ID>

If you connect to your Vera using automator.app you may see this reoccurring and as previous stated, it will not cause any issues with your unit and there is no reason for concern.

Brilliant advice, thank you!
VeraPlus, Nest Cameras (6), Siren, Hue Bulbs/Strips/Blooms (65), Fan Dimmer (6), Aeon 4-in-1s (10), Water Sensors (3), Z-Wave Switches (20), Nest Smoke/CO Protects (5), Ecobee 3, HEM Gen2s (2)